• Journal of Digital Convergence
• /
• v.14 no.6
• /
• pp.439-448
• /
• 2016

The population over 65 years old is 12.7% of total population in 2014 and Korea is going to be an aged society in the near future. The transportation vulnerable including the aged should be guaranteed in walking mobility under safe and comfortable environment for their socio-economic activities. For the era of fusion and convergence this paper investigated the characteristics of walking accidents related to the aged pedestrians and analyzed the aged-oriented walking factors with a reaction time and a walking speed at crosswalks in Yeosu. In the results, the crashes for the aged occur at 9.9% of total crashes and the fatalities of the aged are 40.3% of total fatalities in 2014. The 47.4% of the aged fatalities is also attributed to vehicle-to-pedestrian accidents. The 49.3% of all pedestrian fatalities occurs at the aged pedestrians with a very high proportion. The reaction time and walking speed for the aged were determined as the values located at the lower 15%-tile of the elderly physical ability. It is shown that the reaction time is 4.56 seconds and the walking speed is 0.76 m/s in the case of Yeosu. From two factors' standpoint, the walking environment at crosswalks in Yeosu is inappropriate for the aged.

• Korean Journal of Environment and Ecology
• /
• v.32 no.2
• /
• pp.140-146
• /
• 2018

Wild boars have expanded their habitats in Korea in recent years and caused serious social problems such as crop damage and appearance in urban areas. This study was carried out from May to October 2012 to investigate the environmental factors that affect crop damage based on actual cases reported in Geochang County of Gyeongnam Province, Korea. The analysis showed that the damages by wild boars occurred mainly between August and September, and rice was damaged most often while sweet potatoes were damaged most intensely. The results indicated that the damages were related to the wild boars' preference of crop and the seasonal availability of crops. Other factors that affected the crop damage included the slope, the topographic relief, and the distances from forest, stream, road, and residential area. There was no significant difference of environmental factor according to damage intensity, suggesting that the wild boars tended to attack the same cropland repeatedly and thus accumulating the damage. Our study suggests that reducing crop damages by wild boars will require cultivating crops less preferred by wild boars, installing electric fences, and controlling wild boar population with hunting and trapping.

• Korean Journal of Environment and Ecology
• /
• v.25 no.4
• /
• pp.516-525
• /
• 2011

We studied the influence certain environmental factors (proximity of roosting site, roads, and residential areas) have on the spatial distribution of cranes in the Cheorwon, Korea. Using a range finder and GPS, data were collected from January to February 2007 and were subsequently evaluated with ArcGIS. The size of the cranes' wintering habitat was estimated to be 7$76.9km^2$. Five hundred and fifty-five flocks of cranes were observed and detailed distributions were collected. Feeding distribution of the cranes showed clustered distribution, however, no tendencies of spatial autocorrelation were apparent. Adjacent regions with paved roads and residences showed lower densities than other areas. Distances at which paved roads and residential areas induced changes in feeding flock densities were 1500m and 1750m, respectively. Feeding flock density decreased with increased distance from roosting site. Feeding flock density of the two crane species did not increase as distance from roads increased, however, the density of individuals showed a significant increasing tendency with increased distance from roads. In both species, density of feeding flocks and individuals significantly increased with increasing distance from residential areas. In Red-crowned Cranes, the density of feeding flocks and individuals significantly decreased with increasing distance from roosting site, however, in the case of White-naped Cranes, there was an even distribution in density of feeding flocks and individuals.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.22 no.5
• /
• pp.1-12
• /
• 2019

It is important to measure the height of trees as an essential element for assessing the forest health in urban areas. Therefore, an automated method that can measure the height of individual tree as a three-dimensional forest information is needed in an extensive and dense forest. Since airborne LiDAR dataset is easy to analyze the tree height(z-coordinate) of forests, studies on individual tree height measurement could be performed as an assessment forest health. Especially in urban forests, that adversely affected by habitat fragmentation and isolation. So this study was analyzed to measure the height of individual trees for assessing the urban forests health, Furthermore to identify environmental factors that affect forest growth. The survey was conducted in the Mt. Bongseo located in Seobuk-gu. Cheonan-si(Middle Chungcheong Province). We segment the individual trees on coniferous by automatic method using the airborne LiDAR dataset of the two periods (year of 2016 and 2017) and to find out individual tree growth. Segmentation of individual trees was performed by using the watershed algorithm and the local maximum, and the tree growth was determined by the difference of the tree height according to the two periods. After we clarify the relationship between the environmental factors affecting the tree growth. The tree growth of Mt. Bongseo was about 20cm for a year, and it was analyzed to be lower than 23.9cm/year of the growth of the dominant species, Pinus rigida. This may have an adverse effect on the growth of isolated urban forests. It also determined different trees growth according to age, diameter and density class in the stock map, effective soil depth and drainage grade in the soil map. There was a statistically significant positive correlation between the distance to the road and the solar radiation as an environmental factor affecting the tree growth. Since there is less correlation, it is necessary to determine other influencing factors affecting tree growth in urban forests besides anthropogenic influences. This study is the first data for the analysis of segmentation and the growth of the individual tree, and it can be used as a scientific data of the urban forest health assessment and management.

• Korean Journal of Environment and Ecology
• /
• v.37 no.5
• /
• pp.337-346
• /
• 2023

Although wildlife bridge are built as a way to reduce habitat fragmentation caused by road construction, there is still a lot of debate about their effectiveness. Monitoring methods such as footprint traps and camera traps are used evaluate the effectiveness of wildlife bridge, but there is a limit to evaluate of effectiveness. In this study, the degree of use the wildlfe bridge was surveyed by striped field mouse that is likely use the wildlife bridge and surrounding as a habitat with capture-mark-recapture method.(Apodemus agraius). The distance and route of movement were identified by connecting the capture points, and the environmental factors on the use of the wildlife bridge implemented a generalized linear model(GLM) with the capture number of captured as a dependent variable. Consequently of capture, no individuals crossing the wildlife bridge, striped field mouse use the wildlife bridge as a habitat.The environmental factors affecting the use of mice were vegetation cover(1~2m, 2~8m, over 8m), vegetation construction, maximum diameter at breast height were positively correlated and slope was nagatively correlated. In conclusion, it is expected that the effectiveness of the wildlife bridge will be further improved by planting shrubs and trees and preventing high slope and cut slope increasing the utilization of the rat, such as being used as a food source in the ecosystem.

• Korean Journal of Social Welfare
• /
• v.58 no.4
• /
• pp.313-339
• /
• 2006

The purpose of this study is to analysis empirically the socio-structural causes of working poor. This study used raw data of of Korea National Statistical Office from 1982 to 2004, and put in operation time series multiple regression analysis to use socio-economic factors of macro-economy environment, labor market, distribution system. Contrary to assertion of growth-concentrated people, economic growth rate has had significantly positive effect on the change of working poor size. In the growth period there has been trickle down effect of economic growth, but in the post-Fordism period there has not been valid circular relation. Recent introduction of the U. S. type capitalism resulted in negative phenomenon like aggravation of income distribution, deterioration of employment quality, enlargement of working poor. And there rise a question on socio-economic durability due to de-compensation on intra-institution. It is necessary to grope transition to the high road social market model - that is stable and sustainable - correspond to Korea that is stable and sustainable.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.2A
• /
• pp.95-104
• /
• 2012

Pattern recognition using ensemble classifiers is composed of strong classifier which consists of many weak classifiers. In this paper, we used feature extraction to organize strong classifier using static camera sequence. The strong classifier is made of weak classifiers which considers environmental factors. So the strong classifier overcomes environmental effect. Proposed method uses binary foreground image by frame difference method and the boosting is used to train crowdedness model and recognize crowdedness using features. Combination of weak classifiers makes strong ensemble classifier. The classifier could make use of potential features from the environment such as shadow and reflection. We tested the proposed system with road sequence and subway platform sequence which are included in "AVSS 2007" sequence. The result shows good accuracy and efficiency on complex environment.

• Asian Journal of Atmospheric Environment
• /
• v.8 no.4
• /
• pp.202-211
• /
• 2014

In this study, long-term rainfall data with irregular spatial distribution in Seoul, Korea, were separated into individual precipitation events by the inter-event time definition of 6 hours. Precipitation washout of $PM_{10}$ and $NO_2$ concentrations in the air considering various complex factors were analyzed quantitatively. Concentrations of $PM_{10}$ and $NO_2$ in the atmosphere were lower under condition of rainfall compared to that of non-precipitation, and a noticeable difference in average $PM_{10}$ concentrations was observed. The reduction of concentrations of $PM_{10}$ and $NO_2$ by rainfall monitored at road-side air monitoring sites was also lower than that of urban air monitoring sites due to continuous pollutant emissions by transportation sources. Meanwhile, a relatively smaller reduction of average $PM_{10}$ concentration in the atmosphere was observed under conditions of light rainfall below 1 mm, presumably because the impact of pollutant emission was higher than that of precipitation scavenging effect, whereas an obvious reduction of pollutants was shown under conditions of rainfall greater than 1 mm. A log-shaped regression equation was most suitable for the expression of pollutant reduction by precipitation amount. In urban areas, a lower correlation between precipitation and reduction of $NO_2$ concentration was also observed due to the mobile emission effect.

• Journal of Korean Society for Atmospheric Environment
• /
• v.27 no.4
• /
• pp.460-471
• /
• 2011

A port has been regarded as a significant contributor to air pollution in the surrounding areas. Port-related air pollutants are released from not only marine vessels, but also various land-side sources at ports, which include cargo handling equipment, vehicles, locomotives, and fugitive dust sources by port activities such as bulk handling and vehicle movements. However, most studies in Korea have only focused on vessel emissions and there is a lack of information on the emissions from other sources at port. In this study, in order to establish the port-related emission inventory and evaluate the relative contribution of these sources to air emissions from the Port of Incheon, the emissions from land-side sources were estimated and the CAPSS (Clean Air Policy Support System) data for vessel emissions were used. In particular, the detailed information and activity data for the cargo handling equipment source were collected and the emission factors and emissions by equipment types were calculated using U.S. EPA methodologies. Total HC, CO, $NO_x$, $PM_{10}$, and $SO_2$ emissions from port-related sources including the vessel in 2007 were calculated as 229 ton/year, 638 ton/year, 4,861 ton/year, 307 ton/year, and 3,995 ton/year, respectively. It was found that the vessel was the largest contributor to air pollutant emissions from the port, the cargo handling equipment was responsible for about from 8% to 13% of HC, CO, and $NO_x$ emissions and the resuspended road dust contributed about 39% for $PM_{10}$ emissions. The results of this study will be used to establish the management and reduction strategies of air pollution in the port.

• Journal of KIBIM
• /
• v.12 no.4
• /
• pp.116-127
• /
• 2022

Building Information Modeling, which was applied mainly in the construction sector, is expanding to the road sector, and the government recently recommends preparing individual application guidelines considering the characteristics of detailed fields such as railways, ports, and complexes through BIM implementation guidelines. Compared to general construction projects, a lot of the works such as signals, electricity, and power, and the railway BIM 2030 roadmap has been presented to apply BIM to railway construction projects that require business consultation and work environment review with various local governments, and pilot projects are in operation. Unlike a general building, in which the construction begins after the detailed design is completed, in the railway project, the detailed design of other works proceeds along with the roadbed construction. Because construction and design work together, railways need to coordinate detailed engineering interfaces such as trajectories, signals, and power, and the application of BIM in design interface coordination has the advantage of maximizing the effectiveness of pre-review. Overseas railway construction projects actively used BIM to adjust design interfaces and had a collaboration process to modify BIM models and create construction details from the revised models through regular meetings with suppliers. Therefore, this study aims to derive the factors necessary for establishing a BIM collaboration environment based on a survey of practitioners as a preliminary step for establishing the BIM collaboration process of the railway construction project.