• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.2
• /
• pp.77-82
• /
• 2006

Integrity plays a fundamental role in the feasibility of 'liability critical' applications. Road charging, e.g. road tolling in urban zones or on highways, represents a series of liability critical applications where a guarantee in integrity could be a true enabler: being the mechanism that prevents the incorrect charging of users and enabling the advancement of these applications using GNSS such as Galileo and EGNOS that provide integrity mechanisms. However, the integrity of the end user position is not guaranteed by the EGNOS and Galileo integrity services alone as provided. Algorithms have been developed to supply a guarantee on the performance attainable at the user level through the provision of a horizontal protection level that responds to local user conditions such as multipath or interference. In addition, an application has been developed that implements road charging mechanisms based on the availability of user-level integrity. Results obtained show that the user-level integrity algorithms provided the required level of integrity guarantee and granularity of the horizontal protection levels necessary for executing urban and rural (highway) road charging. In addition, the road charging application developed shows that the current application domain requirements can be met through the provision of guaranteed integrity and that further reductions in the horizontal protection levels along with increased signal availability will enable future road charging modalities.

• Journal of Power Electronics
• /
• 제16권4호
• /
• pp.1621-1628
• /
• 2016

Experiencing power declines when the secondary coil is at the middle position between two primary coils is a serious problem in segmented on-road charging systems with a single energized segmented primary coil. In this paper, the topological transformation of a primary circuit and a hierarchical compensation capacitor control are proposed. Firstly, the corresponding compensation capacitors and receiving powers of different primary structures are deduced under the condition of a fixed frequency. Then the receiving power characteristics as a function of the position variations in systems with a single energized segmented primary coil and those with double segmented primary coils are analyzed comparatively. A topological transformation of the primary circuit and hierarchical compensation capacitor control are further introduced to solve the foregoing problem. Finally, an experimental prototype with the proposed topological transformation and hierarchical compensation capacitor control is carried out. Measured results show that the receiving power is a lot more stable in the movement of the secondary coil. It is a remarkable fact that the receiving power rises from 10.8W to 19.2W at the middle position between the two primary coils. The experimental are in agreement with the theoretical analysis.

• 대한안전경영과학회지
• /
• 제20권3호
• /
• pp.21-26
• /
• 2018

This paper describes result of a study on safety against a fire of charging cable for mobile phone for vehicle. Combustion on the USB cable in the car was happened while driving. Gas coming from the burning USB cable could be a reason which can make a secondary car accident since the driver also can be embarrassed while driving. In order to prevent a secondary car accident connected on the road, to research a reason why USB cable can emit gas and be burned in charging. We did simulation test with abnormal fault condition for the electronic component on the board in the USB cable. So we get the result from abnormal fault condition simulation test, for instance, shorted test for output terminal of 8 pin switch, shorted test for chip resistor after thermal aging in the condition $25^{\circ}C$, 93 % RH during 48 hours. To analysis the result of all test, Combustion on the USB cable was not the 8 pin but other electrical component such as a chip resistor. Therefore we guess that the reason for USB cable combustion in charging in a car was not 8 pin and a LED but another defective component.

• 문화기술의 융합
• /
• 제7권1호
• /
• pp.551-557
• /
• 2021

전기자동차의 증가에 따라 공공장소의 전기자동차 충방전 기반시설 또한 급격히 늘어나고 있다. 전기자동차의 충방전을 위해서는 보안상의 취약점을 최소화하기 위해 전기자동차와 서비스 제공자가 서로의 신원을 확인하는 상호인증과정 후에 층방전 서비스를 시작하여야 한다. 본고에서는 해쉬함수와 메시지 인증코드를 사용하여 전기자동차와 충방전 서비스 제공자간의 양방향 인증 방법을 제안한다. 그리고 효율적인 충방전 시스템의 운영에 대해 기술한다. 제안된 시스템은 외부로 부터의 공격에 강한 내성을 가지며 충방전 서비스 이용자의 개인정보를 효과적으로 보호할 수 있다.

• 전력전자학회논문지
• /
• 제6권6호
• /
• pp.467-473
• /
• 2001

전기자동차 시스템에서 전지관리장치는 배터리의 접압과 온도, 충방전 전류를 검지하고 관리하여, 전기자동차의 운정상태에 따라 충전상태 (SOC)를 추정하여 배터리를 최적 관리하는 역할을 본다. 본 논문에서는 BMS의 역할과 기능에 대한 적합한 알고리즘을 제시하고 이를 EV 차량에 탑재 적용하여 주행시험 및 성능 시험을 행하여 타당성을 입증하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.22-23
• /
• 2015

As wireless power transfer (WPT) technology using strongly coupled electromagnetic resonators is a recently explored technique to realize the large power delivery and storage without any cable or wire, this technique is required for diffusion of electric vehicles (EVs) since it makes possible a convenient charging system. Typically, since the normal conducting coils are used as a transmitting coil in the CPT system, there is limited to deliver the large power promptly in the contactless EV charging system. From this reason, we proposed the combination CPT technology with HTS transmitting antenna, In this study, we examined the improvement of transmission efficiency and properties for HTS and copper antennas, respectively, at 30 cm distance. Thus, we obtained improved transfer efficiency with HTS antenna over 10% compared with copper antenna

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.1238-1243
• /
• 2009

As Social Overhead Capital(SOC) has been expanded, the highway road construction has been accelerated and city road system has been more complicated. So, long road tunnels have been increased and traffic flow rate also has been raised. Accordingly, the exhausting gas of vehicle cars seriously deteriorates the tunnel inside air quality and driving view. In order to improve tunnel inside air quality, it is needed to introduce a compulsory ventilation system as well as natural ventilation mechanism. The former, that is, a special compulsory ventilation facility is very useful and helpful to prevent a tunnel of being contaminated by traffic in most case. In the case of obtaining clearer and longer driving view, the ventilation systems have to be considered in order to remove floating contaminants or exhaust gas from engines. In this paper, discharge electrode design technology will be discussed.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2001년도 추계학술대회 논문집
• /
• pp.74-82
• /
• 2001

This paper sets out what can be said in general about pricing within transport sectors. In this paper we briefly restate the economic principles of pricing that hold for two transport sectors-road and rail. This is used as a basis for a discussion of pricing principles in the transport sector. Here we focus on the pricing of user charges of transport infrastructures. We start this paper to analyse road transport sector and compare it with rail sector. In fact as a result of the trend towards rail reform, the issue of charging mechanisms for the use of rail infrastructure has become increasingly important. In this paper, we just take the problem in theory and present some foreign cases. But our long-run objective will be the design of efficient user charges of infrastructures based on fair intermodal competition.

• 동력기계공학회지
• /
• 제14권3호
• /
• pp.19-24
• /
• 2010

The purpose of this study is to develop a snow melting system using the pulsating heat pipe(PHP). The experimental apparatus is consisted of a PHP, a concrete structure, a constant water thermostatic bath and a flowmeter. The experiment was performed at the outdoor air temperature of $-8^{\circ}C$ and inlet temperature of hot water of $75^{\circ}C$. PHP is the closed and non-loop type heat exchanger which is charging R-410A as an operating fluid. As experimental results, the temperature profile of vertical and horizontal orientation of concrete structure was measured with operating time. The heat flux of the snow melting was required more than 300 $W/m^2$. We confirmed that the snow melting system using the PHP was useful for anti-freezing road.

• 한국전기전자재료학회논문지
• /
• 제25권11호
• /
• pp.930-937
• /
• 2012

Newly developed Series hybrid low-floor articulated vehicle which can meet both road and railway running conditions. It has the rated driving speed of 80 km/h and three driving modes with hybrid(engine+battery) driving mode, engine driving mode, battery driving mode. The battery driving mode requires the several 10 km running without additional charging operation. The vehicle has been equipped with LPB (lithium polymer battery) pack for the series hybrid propulsion system. LPB pack consists of 168 cells (3.7 V in a cell, 80 Ah) in series, DC Circuit breaker, mechanical rack, BMS (battery management system). This paper has shown the design process of LPB pack and application to the vehicle. Driving results in the road was successful to be satisfied with the requirement of the series hybrid vehicle.