• Journal of Ship and Ocean Technology
• /
• v.5 no.1
• /
• pp.14-29
• /
• 2001

Concept and preliminary structural design methods, including large scale FEM analysis and optimisation, for large passenger ships, car passenger and RoRo/ passenger ships are dis-cussed. Applications and experiences in practical design usage are presented.

• Journal of the Society of Naval Architects of Korea
• /
• v.43 no.4 s.148
• /
• pp.451-459
• /
• 2006

When a ship is damaged and flooded, the motion of the damaged ship is significantly influenced by the flooding water dynamics. The flooding water in the damaged ship has been treated as a lumped mass under the quasi-static assumption in most of previous researches. To calculate the motion of damaged ship rigorously, it is necessary to analyze the coupled dynamics of flooding water. In this study, a series of numerical and experimental studies is conducted for the damaged part of ITTC RORO passenger. FLOW3D is used for investigating the feasibility of the state of the art CFD technique. An applicability of the coupled motion analysis of damaged ships can be confirmed by agreement between the numerical results and the model experiments. A CFD technique is considered for the numerical modeling of the dynamics of flooding water.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2006.06a
• /
• pp.73-76
• /
• 2006

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.1 no.1
• /
• pp.50-56
• /
• 2009

The hydrodynamic effect of appendages for high-speed passenger vessels, such as Ro-Pax, Ro-Ro and cruiser vessels, is very severe and, therefore, it is essential to carry out the design of appendages for high-speed passenger vessels from the preliminary design stage to the final detail design stage through a full survey of the reference vessels together with sufficient technical investigation. Otherwise, many problems would be caused by mismatches between the appendages and the hull form. This paper investigates the design characteristics of some appendages, such as the side thruster, the shaft-strut, and the stern wedge, based on the design experience accumulated at Samsung, on CFD, and on model test results for high-speed passenger vessels. Further to this investigation, some practical and valuable design guidelines for such appendages are suggested.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.738-741
• /
• 2003

In general, the essential requirement for cruisers or car ferries is the reduction in noise to ensure high quality and comfort. Recently, the Ro-Ro Passengers Ferry (ROPAX) was built in Hyundai Heavy Industries. In order to minimize the noise levels, careful attention have to De paid by the special committee of experts from the initial design stage to the sea trial. Proper countermeasures, considering the characteristics of sources and receiver spaces, were applied from the noise prediction and various experiment results. Finally, this ship was successfully delivered with excellent noise properties. This paper describes the procedure of noise analysis, the countermeasures of noise control, and the measurement results of the sea trial. Onboard noise analysis had been carried out by statistical energy analysis program and outdoor noise prediction program based on ISO9614. The prediction results are in good agreements with the measurement results. The technology to minimize the noise levels for cruisers or car ferries has been established throughout the construction of this ship.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.8
• /
• pp.1170-1177
• /
• 2008

The purpose of this study is to measure and analyze the indoor thermal conditions in the spring of a korean coastal passenger ship which is 590-passenger Ro-Pax type built at 1997. Especially this study has focussed on the relations between the diffuser open ratio, which can be controlled by 12 steps, and the comfort. Followings are the results of this study. (1) The supply air volume to cabins are maximum 4.3 and 2 times more than design quantity when the diffusers in cabins are open 100% and 50%, respectively. (2) Regardless of diffuser open ratio, the supply air maintains constantly high temperature and below 10% of relative humidity through the experimental days. (3) All the cabins are not satisfied with the ASHRAE comfort criterion at the condition of 100% and 50% of diffuser open ratio, because of high temperature and low relative humidity. (4) At a low diffuser open ratio, number of cabins which satisfy the ASHRAE comfort criterion are increased. (5) Humidifying and dehumidifying, and hvac control system of each cabin must be reviewed and studied at the view of passengers to service more comfort environments.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.8
• /
• pp.946-952
• /
• 2013

Large scale fire tests were conducted to develop water mist nozzles as a component of fixed water- based fire fighting systems for Ro-Ro spaces and special category spaces. Fire scenarios for this system consist of two cases which are for cargo fire in a simulated truck and for passenger vehicle fire, and each case has 3 different tests according to the position between fixed water mist nozzles and fire source. Every experiment proceeded for 30 minutes and acceptance criteria were based on gas temperature, fuel package's damage and ignition of targets. This study primarily dealt with the experimental results of cargo fire and focused on fire suppression capability in accordance with discharge pressure, flow rate and flow characteristics like swirl and penetration of the developed water mist nozzles. It appeared that low pressure water mist nozzles with about 40 L/min were able to control fire occurred in Ro-Ro spaces.

• Journal of Navigation and Port Research
• /
• v.44 no.1
• /
• pp.1-9
• /
• 2020

The purpose of this study was to investigate user satisfaction by identifying the problems and suggesting Improvement plans of interior design in the accommodation area of Ro-Pax ships. First, the characteristics of Ro-P ax ships' accommodation area through previous studies and references, and then a field survey was conducted on seven kinds of Ro-Pax ships. Based on the field study, a questionnaire survey was administered targeting 38 experts involved in passenger ships who indicated that public facilities were the most unsatisfactory of interior design in accommodation areas. As a result of Multiple Linear Regression Analysis, the satisfaction of color showed the highest influence on user satisfaction in accommodation areas, and required the standard of the interior design in accommodation areas. The suggested results of research were the types and layout of public facilities, improvement of color design, provision of interior design standard for accommodation areas, and improvement plans for interior design of Ro-Pax ships.

• Journal of Ocean Engineering and Technology
• /
• v.33 no.2
• /
• pp.196-202
• /
• 2019

In this study, the excessive noise and vibration phenomena of a high-speed Ro/Ro passenger ship were analyzed, and a countermeasure was taken based on them. This ship was granted a comfort class notation by the classification society, which was COMFORT-VIBRATION-II and COMFORT-NOISE-CREW-II. However, unfortunately, excessive noise and vibration in the aft part of the ship were delivered from the twin shaft propellers, and therefore the Class Requirement was not satisfied before delivery. In order to obtain the class notation, all of the concerned parties came to an agreement to reduce the noise and vibration level during operation after delivery because a seasonal ferry service was already scheduled and the cabin was fully booked. The root cause of the massive amount of noise and vibration was mainly the propeller-induced excitation pulse and beating that occurred from the mismatch of the rotating speeds of the two shaft lines. A 1st order vibrating force and beating phenomena existed in the propeller. Thus, a reduction of the excitation force, elimination of the beating phenomena, and decrease of the noise level at the aft area cabins and public spaces were required. In addition, structural reinforcements were conducted using pillars and additional girders at the aft part of the decks.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.37 no.3
• /
• pp.32-46
• /
• 2000

본고에서는 1912년 타이타닉호의 침몰사고 이후 도입된 구획 및 손상복원성규칙의 개정현황, 1987년 herald of Free Enterprise 호와 1994년 Estonia 호의 Ro-Ro Space 해수유입으로 인한 침몰사고 이후 도입된 잔존 복원력 요건 및 Ro-Ro Passenger Ship의 강화 규정을 요약하였다. 또한 IMO 혐약 내의 모든 손상복원성 류칙을 확률론적인 방법으로 통합하기 위하여 IMO SLF (복원성, 만재홀수선 및 어선안전 소위원회)에서 진행중인 HArmonization 작업과 이에 중대한 영향을 미칠 것으로 예상되는 EU(유럽연합) Consortium Project 인 "Harmonization of Rules and Design Rationale(HARDER)" 에 대한 현재까지 의 동향을 요약하였다. 그리고, 부록으로서 방화 및 구명 설비에 대한 협약개정동향을 수록하였다.동향을 수록하였다.