• Journal of Advanced Marine Engineering and Technology
• /
• 제29권8호
• /
• pp.877-882
• /
• 2005

This paper discusses the lateral vibration of a bar which has its tip free. The uniform bar has a solution by summation of some simple exponential functions But if its shape is not uniform, its solution could be by Bessel's function, or mathematical solution could not be existed. Enen if the solution of Bessel's function exists. as Bessel function is a series function. we must got the solution by numerical method Hereby the author Proposes the ununiform beam solution of the matrix method by Ritz's method. and Proposes a new deflection shape function.

• 한국소음진동공학회논문집
• /
• 제17권10호
• /
• pp.946-949
• /
• 2007

This paper discusses the lateral vibration of a beam with boundary condition of one end fixed and the other end free. The uniform beam has a solution by summation of some simple exponential functions. But if its shape is not uniform, its solution could be by Bessel's function or mathematical solution could not exist. Even if the solution of Bessel's function exists, as Bessel function is a series function, we must get the solution by numerical method. Author had proposed the solution of the matrix method by Ritz's method and a new mode shape function, and had earned the good results for a wedge beam. Hereby a vibration analysis for the tapered beam with circle cross section was executed, and so good results were showed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.984-987
• /
• 2003

This paper discusses the lateral vibration of a bar which has its tip free. The uniform bar has a solution by summation of some simple exponential functions. But if its shape is not uniform, its solution could be by Bessel's function, or mathematical solution could not be existed. Even if the solution of Bessel's function exists. as Bessel function is a series function, we must get the solution by numerical method, Hereof the author proposes the solution of the matrix method by Ritz's method, and proposes a new deflection shape

• 한국산학기술학회논문지
• /
• 제19권8호
• /
• pp.71-77
• /
• 2018

철근 콘크리트 암거 상부지반에 있어 아칭효과에 의한 지반의 상대적 변형 때문에 발생하는 침하거동을 평가하기 위해 Ritz 방법과 유한요소법을 적용하고 해석결과를 해석 해에 의한 결과와 상호 비교해 보았다. 유한요소법을 적용하여 절점외력을 구할 경우 요소별 국부좌표계에 관계없이 지표면으로부터의 깊이의 함수로 표현되는 전단응력이 반영되도록 주의할 필요가 있다. 암거 상부지반의 지표면에서의 변위는 해석방법에 상관없이 동일한 값을 보였다. Ritz 방법을 통해 구한 변위를 해석 해와 비교해 볼 때 가정한 변위의 차수를 증가시킬수록 해석 해에 근접한 결과를 보임을 알 수 있었다. 유한요소법에 의한 변위 또한 요소를 세분화 할수록 해석 해에 근접한 결과를 보임을 알 수 있었다. Ritz 방법에 의한 해석결과에 따르면 계산된 응력값이 해석 해에 근접한 결과를 보이지는 않았다. 유한요소법에 의한 응력의 경우 요소를 세분화 할수록 해석 해에 근접한 결과를 보였다. 본 연구에서 고려한 Ritz 방법과 유한요소법에 의한 해석결과를 해석 해와 비교한 결과 유한요소법에 의한 해석결과가 해석 해에 안정적으로 근접하는 결과를 보임을 알 수 있었다.

• Coupled systems mechanics
• /
• 제9권6호
• /
• pp.563-573
• /
• 2020

Dynamic responses of a laminated composite cantilever beam under a harmonic are investigated in this study. The governing equations of problem are derived by using the Lagrange procedure. The Timoshenko beam theory is considered and the Ritz method is implemented in the solution of the problem. The algebraic polynomials are used with the trivial functions for the Ritz method. In the solution of dynamic problem, the Newmark average acceleration method is used in the time history. In the numerical examples, the effects of load parameter, the fiber orientation angles and stacking sequence of laminas on the dynamic responses of the laminated beam are investigated.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1989년도 봄 학술발표회 논문집
• /
• pp.33-37
• /
• 1989

According to the Rayleigh-Ritz approximation method, a solution can be represented as a finite series consisting of space-dependent functions, which satisfy all the geometric boundary conditions of the problem and appropriate smoothness requirement in the interior of the domain. In this paper, an efficient formulation for solving structural dynamics systems in frequency domain is presented. A general procedure called Ritz modes (or vectors) generation algorithm is used to generate the admissible functions, i.e. Ritz modes, Then, the use of direct superposition of the Ritz modes is utilized to reduce the size of the problem in spatial dimension via geometric coordinates projection. For the reduced system, the frequency domain approach is applied. Finally, a numerical example is presented to illustrate the effectiveness of the proposed method.

• Coupled systems mechanics
• /
• 제7권6호
• /
• pp.755-774
• /
• 2018

The Ritz method is known as very successful strategy for discretizing continuous problems, but it has never been used for solving systems of algebraic equations. The Iterated Ritz Method (IRM) is a novel iterative solver based on the discretized Ritz procedure applied at each iteration step. With an appropriate choice of coordinate vectors, the method may be efficient in linear, nonlinear and optimization problems. Additionally, some iterative methods can be explained as special cases of this approach, which helps to understand advantages and limitations of these methods and gives motivation for their improvement in sense of IRM. In this paper, some ideas for generation of efficient coordinate vectors are presented. The algorithm was developed and tested independently and then implemented into the open source program FEAP. Method has been successfully applied to displacement based (even ill-conditioned) models of structural engineering practice. With this original approach, a new iterative solution strategy has been opened.

• 소음진동
• /
• 제3권1호
• /
• pp.77-82
• /
• 1993

In general, the dynamic analysis with FEM(Finite Element Method) of large structures requires large computer memory space and long computational time. For the purpose of economical dynamic analysis of large structures, most of engineers want to use an efficient solution algorithm. This paper reports the modified CMS(Component Mode Synthesis) method which uses more efficient algorithm than the classical CMS method. In this paper, it is shown that Ritz vector sets can play the role of normal mode vector sets of substurctures in the CMS algorithm. The modified CMS method has good convergence performance compared with that of the classical CMS method.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1997년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall 1997
• /
• pp.151-158
• /
• 1997

The main concern of numerical dynamic analysis of large structures is to find an acceptable solution with fewer mode shapes and less computational efforts. component mode method utilizes substructure technique to reduce the degrss of freedom but have a disadvantage to not consider the dynamic characteristics of loads. Ritz Vector method consider the load characteristics but requires many integrations and errors are accumulated. In this study, to prove the effectiveness of component mode method, Lanczos algorithm are introduced. To prove the effectiveness of this method, example structures areanalyzed and the results are compared with SAP90.

• Steel and Composite Structures
• /
• 제42권5호
• /
• pp.649-655
• /
• 2022

In presented paper, moving load problem of simply supported axially functionally graded (AFG) beam is investigated under temperature rising based on the first shear beam theory. The material properties of beam vary along the axial direction. Material properties of the beam are considered as temperature-dependent. The governing equations of problem are derived by using the Lagrange procedure. In the solution of the problem the Ritz method is used and algebraic polynomials are used with the trivial functions for the Ritz method. In the solution of the moving load problem, the Newmark average acceleration method is used in the time history. In the numerical examples, the effects of material graduation, temperature rising and velocity of moving load on the dynamic responses ofAFG beam are presented and discussed.