• Journal of Radiation Protection and Research
• /
• v.41 no.3
• /
• pp.237-244
• /
• 2016

Background: Korea Atomic Energy Research Institute is developing a fission product transport module for predicting the behavior of radioactive materials in the primary cooling system of a nuclear power plant as a separate module, which will be connected to a severe accident analysis code, Core Meltdown Progression Accident Simulation Software (COMPASS). Materials and Methods: This fission product transport (COMPASS-FP) module consists of a fission product release model, an aerosol generation model, and an aerosol transport model. In the fission product release model there are three submodels based on empirical correlations, and they are used to simulate the fission product gases release from the reactor core. In the aerosol generation model, the mass conservation law and Raoult's law are applied to the mixture of vapors and droplets of the fission products in a specified control volume to find the generation of the aerosol droplet. In the aerosol transport model, empirical correlations available from the open literature are used to simulate the aerosol removal processes owing to the gravitational settling, inertia impaction, diffusiophoresis, and thermophoresis. Results and Discussion: The COMPASS-FP module was validated against Aerosol Behavior Code Validation and Evaluation (ABCOVE-5) test performed by Hanford Engineering Development Laboratory for comparing the prediction and test data. The comparison results assuming a non-spherical aerosol shape for the suspended aerosol mass concentration showed a good agreement with an error range of about ${\pm}6%$. Conclusion: It was found that the COMPASS-FP module produced the reasonable results of the fission product gases release, the aerosol generation, and the gravitational settling in the aerosol removal processes for ABCOVE-5. However, more validation for other aerosol removal models needs to be performed.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.23 no.4
• /
• pp.409-418
• /
• 2017

Purpose: Ineffective communication between healthcare professionals leads to medical errors and puts patients at risk of harm. The aim of this study was to examine the effects of interdisciplinary communication training in simulated settings on self-confidence in communication, observed communication behavior, and technical skill performances of nursing students. Methods: A repeated measures design with one group was conducted. Data was collected from 92 nursing students through a self-administered questionnaire and an observed behavior checklist. Data analysis was performed using descriptive statistics, a paired t-test, the Wilcoxon signed rank test, the Friedmann test, a Repeated Measures ANOVA, and the Spearman correlation coefficient. Results: Self-confidence in communication, observed Identification-Situation-Background-Assessment-Recommendation-Read Back communication behavior, and technical skill performances of nursing students were significantly improved. In observed communication behavior, the performance of Assessment and Read Back communication significantly improved. However, communication of Background, Assessment, and Recommendation did not improve to a satisfactory level. Observed communication behavior was not correlated with the overall technical skill performance. Conclusion: These results indicate that interdisciplinary communication training in simulated settings was effective in improving nursing students' confidence and communication skills with physicians. Longitudinal studies with larger samples are recommended in order to verify the effects of interdisciplinary communication training on clinical outcomes as well as communication competence.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.8 no.6
• /
• pp.534-543
• /
• 2015

This paper proposes an Energy Theft Traceback Protocol(ETTP) based on Logging and Marking that can trace Energy Theft back in Smart Grid Environment. The ETTP consists of the following three phases. First, it classifies Energy Theft Type into Measurement Rejection and Data Fabrication by generating an Energy Theft Tree. Second, it detects an Energy Theft by using the Energy Theft Tree. Finally, it trace an Energy Theft back by using the Logging Table of a Router and the Marking Information of a Packet. The result of its simulation shows that the Detection Ratio of Energy Theft is estimated at 92% and the Success Ratio of Energy Theft Traceback at 93%. Therefore, the ETTP not only reduces such risk factors as Forgery and Tampering about Billing information but also provides safe and reliable Smart Grid environment.

• Ocean Systems Engineering
• /
• v.5 no.1
• /
• pp.1-19
• /
• 2015

The water jetting system for a jack-up spudcan requires the suitable design considering the platform/spudcan particulars, environments, and soil conditions, either the surficial clay or surficial sand. The usage of water jetting depends critically on soil conditions. The water jetting is usually used for the smooth and fast extraction of the spudcan in the surficial clay condition. It is also required for inserting spudcan up to the required depth in the surficial sand condition, which is investigated in this paper. Especially, it should be very careful to use the water jetting during an installation of spudcan in the surficial sand condition, because there is a risk of overturning accident related to the punch-through. Therefore, in this study, the effect of water jetting flow rate and time on the change of soil properties and penetration resistance is analyzed to better understand their interactions and correlations when inserting the spudcan with water jetting in surficial sand condition. For the investigation, a wind turbine installation jack-up rig (WTIJ) is selected as the target platform and the multi layered soil (surficial sand overlaying clays) is considered as the soil condition. The environmental loading and soil-structure interaction (SSI) analysis are performed by using CHARM3D and ANSYS. This kind of investigation and simulation is needed to decide the proper water jetting flow rate and time of spudcan for the given design condition.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.4
• /
• pp.721-728
• /
• 2018

This paper introduces various linear block error correction code and compares performances of the correction circuits. As the risk of errors due to power noise has increased, ECC(: Error Correction Code) has been introduced to prevent the bit error. There are two representatives of ECC structures which are SEC-DED(: Single Error Correction Double Error Detection) and SEC-DED-DAEC(: Double Adjacent Error Correction). According to simulation results, the SEC-DED circuit has advantages of small area and short delay time compared to SEC-DED-DAEC circuits. In case of SED-DED-DAEC, there is no big difference between Dutta's and Pedro's from performance point of view. Therefore, Pedro's code is more efficient than Dutta' code since the correction rate of Pedro's code is higher than that of Dutta's code.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.5
• /
• pp.130-135
• /
• 2013

Anti-icing system can reduce traffic accidents and congestion by quickly removing the frozen road surface area. there is no decision criteria for determining application of the Anti-icing system in Korea. In this study, we proposed the decision criteria for determining application of the anti-icing system based on weather and road conditions, i.e., geometric and topographic conditions. Regional climate survey, Solar Radiation analysis, and dynamic vehicle simulation considered road geometry was conducted to standardize the installation method of anti-icing system. Also, we have developed a software that can be determined an installation of anti-icing system.

• Korean Journal of Community Nutrition
• /
• v.11 no.6
• /
• pp.808-813
• /
• 2006

Until now, South Korea does not have either fortification or enrichment program as intervention tools although the addition of micronutrients to foods is for the most part not regulated. The aim of this study was to determine which scenario would most effectively reduce the proportion of the population with low iron intake while not putting other population groups at risk of excessive intakes. In order to investigate potential dietary consequences of iron fortification we analyzed 2 day dietary record data (n=3,955) from the 2001 National Nutrition Surveys. The Proportion of the population consuming dietary iron less than the estimated average requirement (EAR) ranged from $12.4{\sim}87.5%$ depending upon gender and age group. Iron fortification at the level of 100% of Recommended Intake (RI) per 100g to breads and instant o. dried noodles was estimated to result in a 15% decrease of proportion of those with iron less than EAR, while putting 1.4 % of the population greater than the Upper Limit (UL). Iron fortification appeared to be the most effective for the $15{\sim}19$ year old age group, showing 39% reduction of iron intake insufficiency. The results suggest that carefully designed fortification or enrichment to staple foods may contribute to increase dietary iron intakes of Koreans, especially for the young population with a high prevalence of iron inadequacy. As the estimation in this study was based solely upon dietary intake data, iron intake from supplements should be considered in further studies.

• Journal of the Institute of Convergence Signal Processing
• /
• v.11 no.4
• /
• pp.270-277
• /
• 2010

The BAMS filter is a kind of wavelet shrinkage filter based on the Bayes estimators with no simulation, therefore it can be used for a real time filter. The denoising efficiency of BAMS filter is seriously affected by the estimated noise variance in each wavelet band. To remove noise in signals in existing BAMS filter, the noise variance is estimated by using the quartile of the finest level of details in the wavelet decomposition, and with this variance, the noise of the level is removed. In this paper, to remove the image noise includingodified quartile of the level of detail is proposed. And by these techniques, the image noises of mid and high frequency bands are removed, and the results showed that the increased PSNR of ab the midband noise, the noise variance estimation method using the monotonic transform and the mout 2[dB] and the effectiveness in denosing of low noise deviation images.

• Proceedings of the Technology Innovation Conference
• /
• 2002.02a
• /
• pp.133-149
• /
• 2002

This study aims to investigate the impact of wide use of digital technology, in particular, the Internet, on innovation process and corporate strategy in electronics industry. The introduction of digital technology has changed innovation process, business model and organizational structure of the electronics companies. With the introduction of digital technology, the entire value chain of electronics industry from procurement, sales, and marketing to R&D and manufacturing has been restructured. E-commerce has been a major agenda for e-business. Recently, collaboration among electronics companies through e-marketplace has emerged as an important issue. A web-based e-commerce standard, so called RosettaNet, has been developed for facilitating e-transactions of electronics firms. The development of digital technology has dramatically increased the processing speed and sophisticated the virtual reality technology. As simulation becomes easier and more effective, the uncertainty and risk involved in R&D has decreased significantly. Another positive impact is closer cooperation between R&D and manufacturing functions. Taking advantage of automated and flexible production technology, has a new type of firm, so called, EMS (Electronics Manufacturing Services) emerged, whose strategic focus is on manufacturing only. The EMS can be seen as a kind of innovative organization, that is, a modular organization for production function. Digital technology has made convergence of computer and communication possible at early years but right now the convergence has been accelerated in extensive areas of communication, broadcasting, information appliances, software, contents, and services. Firms' effort for an innovative product and service has been intensified and the competition for a new standard product and service has become severe in electronics industry. Business activities are always realized in a specific organizational context. Accordingly building up innovation-friendly organization has emerged as a critical concern. Due to the striking decrease of transaction cost, a network type of organization has proliferated, and a business function turns into a modular organization. As a whole, digital technology has pushed electronics firms into developing their own business model, which takes consideration of standardization of business platform and their core competency.

• Proceedings of the Technology Innovation Conference
• /
• 2005.02a
• /
• pp.124-139
• /
• 2005

In the early stage, the radio communication industry was widely accepted as a monopoly industry, so it has been controled and managed by government. But the advanced technology in Information and Technology industry has led constant increase of demand and dramatic change of communication market. Furthermore it is expected that frequency resource is to be short by market change due to wire-wireless integration. That is why the effort to utilize and manage limited frequency resource efficiently is being executed around the world. Not only newly developing and allocating the spectrum but also reallocating the existing spectrum important are, since transforming inefficiently used existing spectrum to new service can increase producer's surplus and social welfare. The economic approach to valuate the spectrum and spectrum usage right is necessary different from the traditional cost based approach, and through this approach I expect active transaction of spectrum. In this paper the real option methodology is used for valuation of spectrum, considering spectrum user's option right based on future revenue. In detail, the matter of withdrawing and reallocating the existing analog radio broadcasting spectrum is evaluated in this paper, The digitalization of a broadcasting service is widely spreaded around the world in terms of technology and service utility, and analog TV broadcasting has already been decided to be transformed to digital TV broadcasting. It was planned to convert analog radio broadcasting to DAB service before adopting DMB service, but nowadays this issue is not on the table anymore. However if the increasing demand of digital voice and broadcasting service is considered, this kind of research to valuate a spectrum is needed urgently. The result of this research shows that when the redeployment of spectrum is done, social welfare will increases. The point of the reallocation time and value are suggested by the monte carlo simulation through ROVM. In this paper, I use real option to valuate the spectrum and provide the point of the reallocation time and reasonable guideline, and moreover, the suitable information of this paper is expected to reduce risk and loss in policy practice.