• Industrial Engineering and Management Systems
• /
• v.11 no.4
• /
• pp.339-345
• /
• 2012

This research aims to formulate a mathematical model and develop an algorithm for solving a location problem in emergency medical service vehicle parking. To find an optimal parking location which has the least risk score or risk priority number calculated from severity, occurrence, detection, and distance from parking location for emergency patients, data were collected from Pratoom sub-district Disaster Prevention and Mitigation Center from October 2010 to April 2011. The criteria of risk evaluation were modified from Automotive Industry Action Group's criteria. An adaptive simulated annealing algorithm with multiple cooling schedules called multi-agent simulated quenching (MASQ) is proposed for solving the problem in two schemes of algorithms including dual agent and triple agent quenching. The result showed that the solution obtained from both scheme of MASQ was better than the traditional solution. The best locations obtained from MASQ-dual agent quenching scheme was nodes #5 and #133. The risk score was reduced 61% from 6,022 to 2,371 points.

• Journal of the Society of Disaster Information
• /
• v.16 no.3
• /
• pp.493-504
• /
• 2020

Purpose: The purpose of this study is to propose an analytical methodology for selecting the priority of preventive projects in the course of carrying out disaster prevention projects that improve disaster-hazardous areas. Method: Data analysis was performed using RFM model which can divide data grade and perform target marketing based on Recency, Frequency, and Monetary. Result: The top 10% of the area with high RFM value was mainly in the East Sea and the South Sea coast, and the number of damage in private facilities was high. Conclusion: In this study, we used the RFM model to select the priority of disaster risk and to implement the regional disaster risk using GIS. These results are expected to be used as basic data for selecting priority project sites for disaster prevention projects and as basic data in the decision-making process for disaster prevention projects.

• Journal of Hydrogen and New Energy
• /
• v.31 no.1
• /
• pp.65-72
• /
• 2020

In this study, the purpose is to identify the risks of the facilities of packaged hydrogen stations. As a risk identification method, failure mode & effect analysis (FMEA), a qualitative risk assessment, was used to analyze failure mode and effects of component of each facility. The analysis criteria were used to derive the risk priority number (RPN) using the 5-point method according to severity, incidence, and detectability. The study analyzed a total of 141 components of 23 types that can be identified on the design of the packaged hydrogen filling station. As a result, 683 types of failures and their causes and effects were identified. and the RPN was number of a total of 1,485. Of these, 10 failure types with a RPN value of 40 or more were deemed necessary. In addition, a list of failure types with a severity score of 5 was identified and analyzed.

• Nuclear Engineering and Technology
• /
• v.50 no.8
• /
• pp.1246-1254
• /
• 2018

The importance of performing Level 3 probabilistic safety assessments (PSA) along with a general interest in assessing multi-unit risk has been sharply increasing after the Fukushima Daiichi nuclear power plant (NPP) accident. However, relatively few studies on multi-unit Level 3 PSA have been performed to date, reflecting limited scenarios of multi-unit accidents with higher priority. The major difficulty to carry out a multi-unit Level 3 PSA lies in the exponentially increasing number of multi-unit accident combinations, as different source terms can be released from each NPP unit; indeed, building consequence models for the astronomical number of accident scenarios is simply impractical. In this study, a new approach has been developed that employs the look-up table method to cover every multi-unit accident scenario. Consequence results for each scenario can be found on the table, established with a practical amount of effort, and can be matched to the frequency of the scenario. Preliminary application to a six-unit NPP site was carried out, where it was found that the difference between full-coverage and cut-off cases could be considerably high and therefore influence the total risk. Additional studies should be performed to fine tune the details and overcome the limitations of the approach.

• 시스템엔지니어링워크숍
• /
• s.1
• /
• pp.65-68
• /
• 2003

The air separation plants in the POSCO's Gwangyang Steel Works require high standard on quality as well as reliability as they have to continuously supply essential utility gases as oxygen, nitrogen and argon. And the plants are in the category of high pressure gas systems by the regulatory guidelines, which signifies that they have to maintain utmost level of safety. As an effort to systematically understand and calculate the risk potentials in the air separation plants, risk assessments have been performed on a phased approach: qualitative and followed by quantitative POSCO has chosen to use hazard and operability study and fault tree analysis to satisfy the requirement. As a result, the risk assessment team has identified number of safety and operability related findings. With importance of each and ever findings calculated, a priority list for what/when to do for them could have been presented on a balance fashion.

• Journal of Korean Society for Quality Management
• /
• v.40 no.3
• /
• pp.306-315
• /
• 2012

Purpose: To ensure good quality munitions, we require quantitative risk management and optimal risk management of system characteristics. Methods: Failure mode and effects analysis (FMEA) is a widely used technique to assess or to improve reliability of products at early stage of design and development. Traditionally, the prioritization of failures for corrective actions is performed by developing a risk priority number (RPN). Results: This paper reestablishes an effective methodology for prioritization of failure modes in FMEA procedure. Revised evaluation criteria of RPN are devised. Conclusion: To verify the proposed methodology, it is applied to RPN evaluation for K21 infantry combat vehicle.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.25 no.2
• /
• pp.174-179
• /
• 2015

Failure Mode and Effects Analysis (FMEA) has been used by Dynamic Positioning (DP) system for risk and reliability analysis. However, there are limitations associated with its implementation in offshore project. 1) since the failure data measured from the SCADA system is missing or unreliable, assessments of Severity, Occurrence, Detection are based on expert's knowledge; 2) it is not easy for experts to precisely evaluate the three risk factors. The risk factors are often expressed in a linguistic way. 3) the relative importance among three risk factors are rarely even considered. To solve these problems and improve the effectiveness of the traditional FMEA, we suggest a Fuzzy-FMEA method for risk and failure mode analysis in Dynamic Positioning System of offshore. The information gathered from DP FMEA report and DP FMEA Proving Trials is expressed using fuzzy linguistic terms. The proposed method is applied to an offshore Dynamic Positioning system, and the results are compared with traditional FMEA.

• Journal of the Korean Society of Safety
• /
• v.26 no.6
• /
• pp.104-110
• /
• 2011

In FMEA, the risk priority number(RPN) is used for risk evaluation on each failure mode. It is obtained by multiplying three components, i.e., severity, occurrence, and detectability of the corresponding failure mode. Each of the three components are usually determined on the basis of the past experience and technical knowledge. But this approach is not strictly objective in evaluating risk of a given failure mode and thus provide somewhat less scientific measure of risk. Assuming a homogeneous Poisson process for occurrence of the failures and causes, we propose a more scientific approach to evaluation of risk in FMEA. To quantify severity of each failure mode, the mission period is taken into consideration for the system. If the system faces no failure during its mission period, there are no losses. If any failure occurs during its mission period, the losses corresponding to the failure mode incurs. A longer remaining mission period is assumed to incur a larger loss. Detectability of each failure mode is then incorporated into the model assuming an exponential probability law for detection time of each failure cause. Based on the proposed model, an illustrative example and numerical analyses are provided.

• Journal of the Korean Society of Safety
• /
• v.36 no.2
• /
• pp.10-17
• /
• 2021

This paper presents the robust design of each component used in the development of an induction bolt heating system for dismantling the high-temperature high-pressure casing heating bolts of turbines in power plants. The induction bolt heating system comprises seven assemblies, namely AC breaker, AC filter, inverter, transformer, work coil, cable, and CT/PT. For each of these assemblies, the various failure modes are identified by the failure mode and effects analysis (FMEA) method, and the causes and effects of these failure modes are presented. In addition, the risk priority numbers are deduced for the individual parts. To ensure robust design, the insulated-gate bipolar transistor (IGBT), switched-mode power supply (SMPS), C/T (adjusting current), capacitor, and coupling are selected. The IGBT is changed to a field-effect transistor (FET) to enhance the voltage applied to the induction heating system, and a dual-safety device is added to the SMPS. For C/T (adjusting current), the turns ratio is adjusted to ensure an appropriate amount of induced current. The capacitor is replaced by a product with heat resistance and durability; further, coupling with a water-resistant structure is improved such that the connecting parts are not easily destroyed. The ground connection is chosen for management priority.

• The Journal of the Korea Contents Association
• /
• v.17 no.6
• /
• pp.643-649
• /
• 2017

This research is to compare factors which influence to mobilize police force necessary for crowd gathering occasions, and the purpose of this research is to prepare scientific basis for mobilization of police force by understanding order of priority of obstructive factors to mobilize police force for progressing safe crowd gathering occasions. Crowd gathering occasion has a characteristic that minor cause can lead to huge damage because many people concentrically gather at a specific place. In order to control these risks, it is necessary to analyze criteria on order of priority which can arouse risk to mobilize police force. In this research, I classified the factors influencing safety of crowd gathering occasion as internal risk factor, external risk factor and traffic safety threatening and set up the level of private security manpower and participants mobilized to crowd gathering occasion as independent variable and set up mobilized police force from 2013 to 2014 as dependent variable and analyzed it hierarchical analysis. From the result of analysis, the biggest influence to mobilization of police force for crown gathering occasion was the number of participants, and next self order-keeping agents and reason of mobilizing police force. Based on the result of analysis that the biggest factor to mobilize police force to crowd gathering occasion is the number of participants, it can be resulted that the number of participants influence to the risk of crowd gathering occasion.