• Steel and Composite Structures
• /
• 제51권5호
• /
• pp.509-527
• /
• 2024

Bonding carbon fiber-reinforced polymer (CFRP) laminates have been extensively employed in the restoration of steel constructions. In addition to the mechanical properties of the CFRP, the bond strength (P_U) between the CFRP and steel is often important in the eventual strengthened performance. Nonetheless, the bond behavior of the CFRP-steel (CS) interface is exceedingly complicated, with multiple failure causes, giving the P_U challenging to forecast, and the CFRP-enhanced steel structure is unsteady. In just this case, appropriate methods were established by hybridized Random Forests (RF) and support vector regression (SVR) approaches on assembled CS single-shear experiment data to foresee the P_U of CS, in which a recently established optimization algorithm named Aquila optimizer (AO) was used to tune the RF and SVR hyperparameters. In summary, the practical novelty of the article lies in its development of a reliable and efficient method for predicting bond strength at the CS interface, which has significant implications for structural rehabilitation, design optimization, risk mitigation, cost savings, and decision support in engineering practice. Moreover, the Fourier Amplitude Sensitivity Test was performed to depict each parameter's impact on the target. The order of parameter importance was t_c> L_c > E_A > t_A > E_c > b_c > f_c > f_A from largest to smallest by 0.9345 > 0.8562 > 0.79354 > 0.7289 > 0.6531 > 0.5718 > 0.4307 > 0.3657. In three training, testing, and all data phases, the superiority of AO - RF with respect to AO - SVR and MARS was obvious. In the training stage, the values of R² and VAF were slightly similar with a tiny superiority of AO - RF compared to AO - SVR with R² equal to 0.9977 and VAF equal to 99.772, but large differences with results of MARS.

• 터널과지하공간
• /
• 제34권1호
• /
• pp.54-70
• /
• 2024

생산이 완료된 노천광산 채굴적을 광미(광물찌꺼기) 적치 장소로 활용하는 방안은 기존 광미 적치 시설(TSF, Tailing storage facility)의 설치 공간 및 운영비용 문제 해결을 위한 대안으로 제시된다. 하지만 장기간에 걸쳐 적치된 광미는 주변 암반에 추가적인 하중으로 작용하여 광산의 역학적 안정성을 저해할 위험성이 존재한다. 본 연구에서는 호주 Marymia 광산의 사례를 참고하여 약 60,400 시간에 걸친 광미 적치 시나리오를 구축하였으며, 다양한 지하 채광장 형태 및 암반 조건에 따른 천반 수평필러의 역학적 안정성을 Sigma/W 해석 소프트웨어를 활용하여 분석하였다. 분석 결과, 광미 적치가 장기간 지속됨에 따라 천반 수평필러의 파괴 가능성이 유의미하게 증가함을 확인하였다. 해당 결과는 노천채굴적 내 광미 적치 시 광산 구조에 대한 역학적 안정성 고려가 필수적임을 시사한다.

• Journal of Applied Biological Chemistry
• /
• 제66권
• /
• pp.29-38
• /
• 2023

Recent studies have highlighted the link between diseases and inflammation across our lifespan. Our sedentary lifestyle, high-calorie diet, chronic stress, chronic infections, and exposure to pollutants and xenobiotics, collectively intensify the course and recurrence of infections and inflammation in our bodies, promoting the prevalence of chronic diseases and aging. Given such phenomena and considering additional factors such as the frequency of prescription, and easy access to over-the-counter drugs, the need for anti-inflammatory therapeutics is ever-increasing. However, the readily available anti-inflammatory treatment option comes with a greater risk of side effects or high cost (biologics). Therefore in this growing competition of discovering and developing new potent anti-inflammatory drugs, we focused on utilizing the established knowledge of traditional medicine to find lead compounds. Since lead optimization is an indispensable step toward drug development, we applied this concept for the production of potent anti-inflammatory compounds achieved by structural modification of flavonoids. The derivative obtained through acetylation of myricetin, 3,3',4',5,5',7-hexaacetate myricetin, showed a greater inhibitory effect in the production of pro-inflammatory mediators such as nitric oxide, Prostaglandin E₂, and pro-inflammatory cytokines like interleukin-6, interleukin1β, in lipopolysaccharide-stimulated RAW264.7 mouse macrophage cells compared to myricetin. The increased potency of inhibition was in conjunction with an increased inhibitory effect on inducible nitric oxide synthase and cyclooxygenase-2 proteins. Through such measures, this study supports lead optimization for well-established lead compounds from traditional medicine using a simpler and greener chemistry approach for the purpose of designing and developing potent anti-inflammatory therapeutics with possibly fewer side effects and increased bioavailability.

• East Asian Economic Review
• /
• 제28권3호
• /
• pp.359-388
• /
• 2024

With the escalation of global trade, the Chinese commodity futures market has ascended to a pivotal role within the international shipping landscape. The Shanghai Containerized Freight Index (SCFI), a leading indicator of the shipping industry's health, is particularly sensitive to the vicissitudes of the Chinese commodity futures sector. Nevertheless, a significant research gap exists regarding the application of Chinese commodity futures prices as predictive tools for the SCFI. To address this gap, the present study employs a comprehensive dataset spanning daily observations from March 24, 2017, to May 27, 2022, encompassing a total of 29,308 data points. We have crafted an innovative deep learning model that synergistically combines Long Short-Term Memory (LSTM) and Convolutional Neural Network (CNN) architectures. The outcomes show that the CNN-LSTM model does a great job of finding the nonlinear dynamics in the SCFI dataset and accurately capturing its long-term temporal dependencies. The model can handle changes in random sample selection, data frequency, and structural shifts within the dataset. It achieved an impressive R² of 96.6% and did better than the LSTM and CNN models that were used alone. This research underscores the predictive prowess of the Chinese futures market in influencing the Shipping Cost Index, deepening our understanding of the intricate relationship between the shipping industry and the financial sphere. Furthermore, it broadens the scope of machine learning applications in maritime transportation management, paving the way for SCFI forecasting research. The study's findings offer potent decision-support tools and risk management solutions for logistics enterprises, shipping corporations, and governmental entities.

• Design & Manufacturing
• /
• 제18권3호
• /
• pp.1-8
• /
• 2024

Macular degeneration is a disease that damages the macula, the center of the retina, and is one of the three major eye diseases along with glaucoma and diabetic retinopathy. The optic nerve and most of the photoreceptor cells are located here, and since this is where images of objects are formed, it is the most important area for vision. The main symptom of macular degeneration is the inability to clearly distinguish the shape of objects or the inability to distinguish colors and light and dark. It is also a serious eye disease that causes black spots in the center of the field of vision. However, it is difficult to distinguish it from the form of vision loss due to presbyopia, so early diagnosis is often missed. The most common treatment for macular degeneration is antibody injection therapy. This treatment requires regular injections once every 1-2 months. When receiving antibody injection therapy, the fear of having to inject directly into the eye and the cost of long-term repeated procedures are a great burden to patients. To overcome these problems, special sustained-release formulations using drug delivery systems are being developed. Since the release speed and release time of the drug can be controlled, the number of times the drug is administered can be drastically reduced. However, the implant (Ø 0.46×6.0mm), which is a sustained-release agent, is manufactured by mixing biodegradable resin (PLGA) and therapeutic agent in a ratio of 4:6, so it is very brittle and there is a high risk of implant damage during handling. In order to safely insert the implant into the eye, a transport device that can be driven with controlled force is required. Therefore, in this study, the lever operating force was measured and analyzed to determine the influence of factors according to the cross-sectional thickness and shape of the linkage produced through injection molding as well as the post-process.

• 한국인쇄학회지
• /
• 제30권3호
• /
• pp.89-114
• /
• 2012

For as to world, the concern about the environment problem is enhanced than any other time in the past because of being 21 century. And the environment problem is highlighted as the world-wide issue. The time of the environment problem intimidates the alive of the mankind and presence of an earth over the time. It becomes the essentiality not being selection in the personal living or the economical viewpoint now to prepare for the climatic modification. As to the company management, the green growth period which it excludes the environment management considering an environment, cannot carry on the company the continued management comes. That is, in the change center of the management paradigm, there is the environment management. Nearly, the greenhouse gas which the publication industry is the environmental toxic material like all industries is generated. The greenhouse gas is ejected in the process of running the manufacturing process and print shop of the various kinds material used as the raw material of the book. Particularly, the tree felling for getting the material of the paper is known to reach the direct influence on the global warming. This study does according to an object it considers and organizes the environment parameter based on this kind of fact as to the publication industry. And it is determined as the reference which is used as the basic materials preparing the case that carbon exhaust right transaction(CAP and TRADE) drawing are enforced in all industries and is sustainable the management of the publication industry and reduces the environmental risk among the company many risk management elements and plans and enforces the publication related policy that there is a value. In the printing publication industry, this study tried to inquire into elements discharging the environmental pollutant or the greenhouse gas. Additionally, in the printed publication production process, it tried to inquire into the effort for an environment-friendly and necessity at the printing paper and the printers ink, regarded as the element discharging the greenhouse gas all kinds of the printing materials, operation of the print shop and all kinds of the machines and recycle process, and etc. These considerations make these industrial field employees aware of the significance about a conservation and environmental protection. They try to give a help in the subsequent study producing quantitatively each environmental parameter emission of green house gas. This makes the calculation of the relative $CO_2$ output reproached ultimately possible. Meanwhile, in a sense, many research protects and improving an environment in connection with the contents of research at the printing publication industrial field is in progress. There will be the voluntary human face that it has to protect an environment but this can not do by the outside factor according to all kinds of environment related law and regulation. Anyway, because of acting on company management as the factor of oppression, the increase of this environment-related correspondence cost could know that the research that the environment loading relates with a procurement and development, environment management system introduction, quality control standard, including, normalizing including a material, and etc. through the part of the effort to reduce the cost low was actively in progress. As to the green growth era, as follows, this paper prescribed the subject and alternative of the print publication industry. It is surrounded by the firstly new digital environment and the generation of the subject. And secondly the printing industry is caused by the point of time when the green growth leaves by the topic which is largest in the global industry and it increases. The printing publication industry has to prepare the bridgehead for the environment-friendly green growth as the alternative for this resolution with first. The support blown in each industry becomes the obligation not being selection. Prestek in which the print publishing was exposed to spend many energies and which is known as the practice of the sustainable print publishing insisted that it mentioned importance of the green printing through the white pages in 2008 and a company had to be the green growth comprised through the environment-friendly activity. The core management for the sustainable printing publication industry presented from Presstack white pages is compacted to 4 words that it is a remove, reduce, recover, and recycle. Second, positively the digital printing(POD) system should be utilized. In the worldwide print out market, the digital printing area stops at the level of 10% or so but the change over and growth of the market of an analog-to-digital will increase rapidly in the future. As to the CEO Jeff Hayes of the Infoland, the offset print referred to that it of the traditional method got old and infirm with the minor phase of the new printing application like the customer to be wanted publication and the print of the digital method led the market. In conclusion, print publishers have to grasp well the market flow in the situation where a digitalization cannot be generalized and a support cannot avoid. And it keeps pace with the flow of the digital age and the recognition about the effort for the development and environment problem have to be raised. Particularly, the active green strategy is employed for the active green strategy.

• 한국임상보건과학회지
• /
• 제2권1호
• /
• pp.1-16
• /
• 2014

Purpose. For a more efficient hospital management, this study aims to provide basic data so that the hospital management and staff in charge of hospital administration may systematically classify and collect hospital information, by analyzing the ordinary characters of an upper-level general hospital system and its common-type balance sheet, common-type profit and loss statement and financial ratio. Methods. By using information about an upper-level general hospital in C Province, provided by Alio(www.alio.go.kr), a public organization information provision site, Health Insurance Review & Assessment Service(www.hira.or.kr) and Ministry of Health and Welfare(www.mw.go.kr), this study analyzed 3 year's data from 2010 to 2012 and provided basic data by analyzing the ordinary characters of an upper-level general hospital system, and its common-type balance sheet, common-type profit and loss statement and financial ratio. Results. After analyzing the ordinary characters, common-type balance sheet, common-type proft and loss statement and financial ration of this general hospital, based on the 2010 to 2012 data, this study came to the following conclusions. Firstly, out of all the 1,069 hospital staff, there were 272 doctors working for 24 medical departments, out of whom the majority was 33 physicians. Most of the nurses were third-class ones, and about 2,000 outpatients and 600 inpatients on average were treated per day. Secondly, as a result of analyzing the common-type balance sheet, this study discovered that intangible assets out of fixed assets accounted for 41%, the majority, out of which usable and profitable donation asset buildings were of great importance, and the liquid assets increased more in 2012 than 2011. In the financial structure, the ratio of liquid liabilities was over 50% out of all the liabilities in 2012, and the ratio of purchase payables was high as well. The ratio of fixed liabilities reached up to 40%, out of which the retirement benefit appropriation fund was quite high. The capital was over 80%, but the surplus was in a deficit state. Compared to the capital, the ratio of total liabilities was about 90%, which indicates the financial structure of this general hospital was vulnerable. Thirdly, as a result of analyzing the common-type profit and loss statement, this study found out that the medical profits from inpatients were higher than profits from outpatients. The material cost was related to the medical quality of this general hospital, and it was as high as 30% out of the total costs and was about 45% of the labor cost. This general hospital showed 10% in the ratio of non-medical profits, and it seemed because of government subsidies. The ratios of medical profits and current net income were gradually changing for the better in 2012, compared to 2011. Lastly, as a result of analyzing the financial ratio, it was found that the liquidity ratio kept decreasing, from 110.7% in 2010 and 102.0% in 2011 to 77.2% in 2012. Besides, it was analyzed that the liquidity ratio and the net working capital ratio greatly decreased, while the quick ratio and the liquid ratio kept decreasing. Conclusions. 1. It is necessary to take the risk management into more consideration, and particularly, it is needed to differentiate and manage the levels of risk in detail. 2. By considering the fact that investments into hospital infrastructures were mostly based on liabilities, it is needed to deal with the scale of losses when evaluating risks. 3. By reflecting the character that investments into hospital infrastructures were based on liabilities, it is necessary to consider the ratio of ordinary profits as well as the ratio of operating profits to sales, and it is also important to consider sales productivity factors, such as the sales amount per a sickbed, by comparing them with other hospitals. As for limitations of this study, there may be some problems in terms of data interpretation because of the lack of information about the number of inpatients and the number of outpatients per year, which are needed for the break-even point analysis. Besides, to suggest a direction for the improvement of hospital management through analyses, non-financial factors should be reflected, such as the trend of economy, medical policies, and politic backgrounds. However, this study only focused on the common-type balance sheet, common-type profit and loss statement and financial ratio, so this study is actually limited to generalizing all the factors by analyzing public data only.

• KDI Journal of Economic Policy
• /
• 제14권2호
• /
• pp.109-153
• /
• 1992

본고(本稿)에서는 우리나라 은행산업(銀行産業)의 트랜스로그비용함수(費用函數)와 규모(規模) 및 범위(範圍)의 경제성(經濟性), 비용(費用)의 보완성(補完性) 그리고 경쟁적(競爭的) 생존력(生存力) 등 효율성지표들을 추정함으로써 은행산업(銀行産業)의 효율성(效率性)을 평가하고 제도개선방향(制度改善方向)에 대한 시사점을 논하였다. 추정결과에 의하면, 우선 규모(規模)의 경제성(經濟性)의 경우는 은행대출(銀行貸出)이 규모(規模)의 비경제하(非經濟下)에 있고 모든 다른 업무(業務)들은 규모(規模)의 경제(經濟)를 시현하고 있지만, 전업무에 걸친 규모(規模)의 경제(經濟)는 부재(不在)하는 것으로 관찰된다. 다음, 범위(範圍)의 경제(經濟)의 경우는 유가증권투자(有價證券投資)와 신탁자산(信託資産) 및 수신(受信) 등은 범위(範圍)의 경제하(經濟下)에 있는 반면, 은행예금(銀行預金)은 범위(範圍)의 비경제하(非經濟下)에 있고 전업무에 걸친 범위(範圍)의 경제(經濟)는 강한 것으로 관찰되고 있다. 그리고 비용보완성(費用補完性)의 경우는 유가증권투자(有價證券投資)가 은행대출(銀行貸出), 예금(預金) 및 신탁업무(信託業務)와, 그리고 신탁자산운용업무(信託資産運用業務)가 은행자산운용업무(銀行資産運用業務)와 각각 비용보완관계(費用補完關係)를 보이고 있는 반면, 은행예금(銀行預金)은 특히 은행대출(銀行貸出)과 그리고 신탁자산업무(信託資産業務)와 경쟁관계에 있다. 한편 은행산업(銀行産業)에는 경쟁적(競爭的) 생존력(生存力)이 부재(不在)하는 것으로 관찰되고 있다. 이상의 결과들의 시사점을 정리하면, 우선 은행대출(銀行貸出)은 상대적으로 규모를 축소하고 여타의 모든 은행업무(銀行業務)나 신탁업무(信託業務)들은 규모를 확대함으로써 효율성제고(效率性提高)에 기여할 수 있을 것이며, 은행예금(銀行預金)과 은행주변업무는 앞으로 금융(金融)의 심화(深化)가 진행되면 여타업무에서 분리되어 각각 독립 운영될 가능성이 높다. 유가증권업무(有價證券業務)와 신탁자산(信託資産) 및 수신업무(受信業務)들을 추가확대함으로써 은행업무(銀行業務)의 효율성(效率性)이 증대될 수 있을 것으로 보여 겸업주의(兼業主義) 은행제도(銀行制度)의 타당성은 높지만, 은행산업(銀行産業)의 자연독점적인 성격은 부재(不在)하여 섣부른 규모(規模)만의 확대(擴大)는 오히려 경쟁력(競爭力)을 저하시킬 수도 있을 것이다.

• 마케팅과학연구
• /
• 제18권4호
• /
• pp.61-118
• /
• 2008

본 연구는 국내외 프랜차이즈의 해외진출에 대한 연구들을 바탕으로 국제프랜차이징연구의 전체적인 연구체계를 세워보고, 연구체계를 형성하고 있는 연구요인들을 확인하여 각 연구요소별로 이루어지는 연구주제와 내용을 살펴보고, 앞으로의 연구주제들을 제안하고자 한다. 주요한 연구요소들은 국제프랜차이징의 동기 및 환경 요소과 진출의사결정, 국제프랜차이징의 진입양식 및 발전전략, 국제프랜차이징의 운영전략 및 국제프랜차이징의 성과이다. 이외에도 국제프랜차이징 연구에 적용할 수 있는 대리인이론, 자원기반이론, 거래비용이론, 조직학습이론 및 해외진출이론들을 설명하였다. 또한 국제프랜차이징연구에서 보다 중점적으로 개발해야 할 질적, 양적 방법론을 소개하였으며, 마지막으로 국내연구의 동향을 정리하여 추후의 연구방향을 종합적으로 정리하였다.

• Asian Pacific Journal of Cancer Prevention
• /
• 제14권12호
• /
• pp.7459-7466
• /
• 2013

Background: Some 60 years after introduction of the Papanicolaou smear worldwide, cervical cancer remains a burden in developing countries where >85% of world new cases and deaths occur, suggesting a failure to establish comprehensive cervical-cancer control programs. Effective interventions are available to control cervical cancer but are not all affordable in low-income settings. Disease awareness saves lives by risk-reduction as witnessed in reducing mortality of HIV/AIDS and smoking-related cancers. Subjects and Methods: We initiated a community-based awareness program on cervical cancer in two low-income Muslim Uyghur townships in Kashi (Kashgar) Prefecture, Xinjiang, China in 2008. The education involved more than 5,000 women from two rural townships and awareness was then evaluated in 2010 and 2011, respectively, using a questionnaire with 10 basic knowledge questions on cervical cancer. Demographic information was also collected and included in an EpiData database. A 10-point scoring system was used to score the awareness. Results: The effectiveness and feasibility of the program were evaluated among 4,475 women aged 19-70 years, of whom >92% lived on/below US$1.00/day. Women without prior education showed a poor average awareness rate of 6.4% (164/2,559). A onetime education intervention, however, sharply raised the awareness rate by 4-fold to 25.5% (493/1,916). Importantly, low income and illiteracy were two reliable factors affecting awareness before or after education intervention. Conclusions: Education intervention can significantly raise the awareness of cervical cancer in low-income women. Economic development and compulsory education are two important solutions in raising general disease awareness. We propose that implementing community-based awareness programs against cervical cancer is realistic, locally affordable and sustainable in low-income countries, which may save many lives over time and, importantly, will facilitate the integration of comprehensive programs when feasible. In this context, adopting this strategy may provide one good example of how to achieve "good health at low cost".