• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.3
• /
• pp.241-253
• /
• 2008

Recently, it is appearing that new paradigm of urban planning that ubiquitous concept such as the u-City, uECO-City is introduced while is rising necessity about third dimensional geo-spatial information of high quality for urban area. Orthophoto can manufacture by expense and time that is less easily than digital map using personal computer even if is not highly technician and according as position relation between manmade feature and natural feature is equal, can get information of distance, angle, horizontal and vertical position coordinate of topographic, area etc.. directly through orthophoto. Also, visual effect is good that orthophoto is expressed by image and interpretation is easy to detailed part of topographic. Manufacture and practical use are consisting in various field, for it is having advantage that can recognize information effectively than digital map. Therefore, this study presents a way of generating a detailed DSM for producing a true-orthphoto of the urban area, and this study also presents a way to produce an optimum true-orthophoto for an urban area by investigating through experiment the optimum variable for the geometric and radiometric correction of the orthophoto. This study also examined the potentials of the thesis by building a 3-dimensional city model of the model region with the above thesis on optimum generating method.

• Journal of Korea Water Resources Association
• /
• v.41 no.2
• /
• pp.185-196
• /
• 2008

The flash flood has been studied in the climatological aspect which considers temporal and spatial characteristics of rainfall. However, we have not interested in runoff hydrograph for flash flood study. Therefore, our objectives of this study are to apply a work of Bhaskar et. al (2000) which studied runoff hydrograph to represent the flash flood to Korea and also to distinguish flash flood event from general flood event. That is, we quantified the severity of flash flood by estimation of flash flood index using runoff hydrograph. This study estimated the flash flood index for investigating the relative severity of flash flood in Han river basin with 101 flood events. Also we quantified the flash flood severity for flood event by heavy rainfall occurred in July of 2006. As a result, Kangwon-do province showed more severe flash flood than other areas in Han river basin and urban area such as Jungrang cheon stream also showed severe flash flood. We analyzed a flash flood of July of 2006 by dividing July into 1st to 3rd terms. From the analysis we knew that the 1st term of July showed the severe flash flood was occurred in Seoul area and the 2nd term showed it was occurred in Kangwon-do province.

• Fire Science and Engineering
• /
• v.30 no.3
• /
• pp.138-147
• /
• 2016

As services for citizens' security and protection offered at the national and social levels become more widely recognized across society, the more frequent use of ambulances by patients with both minor and major injuries is being observed. However, the number of safety accidents during transport by ambulances, which are responsible for the prompt transport of patients, has been rising in tandem with the increase in their use. This is due not only to their inconspicuousness both on the road and in other environments where these vehicles are exposed, but also to the high chance of secondary accidents, putting the lives of both patients and emergency responders at risk. It is important to study and develop designs that guarantee protection against safety accidents, noting that ambulances are completely exposed and unprotected on the road on cloudy days and at night-time. In addition, by identifying colors and design motives that enhance the conspicuity of ambulances from a distance and increase their security, emergency responders and patients can be safely protected, the identity of the ambulances can be reinforced and modernized, and the sense oppression which can be visually imposed on patients in a psychologically unstable condition can be eased. Against this backdrop, this study presents the process involved in deriving the exteriors of ambulances in Korea, including their colors and patterns, by examining the established global best practices and identifying the need for more studies into colors, even unconventional ones, that improve their safety.

• Membrane Journal
• /
• v.30 no.3
• /
• pp.158-172
• /
• 2020

In the aspect of saving energy and water, facilitating the separation membrane for the water treatment has been rising recently as one of the possible solutions. However, microbial biofouling effect is the biggest obstacle that hinders reaching higher permeability over a prolonged period of nanofiltration operation. To solve this problem and fully utilize the filtration membranes with enhanced performance, largely two kinds of solutions are studied and the first and the most commonly mentioned type is the one using the silver nanoparticles. Since silver nanoparticles are important to be well tailored on membrane surface, various methods have been applied and suggested. Using silver nanoparticles however also has the drawbacks or possible toxicity risks, raising the need for other types of utilizing non silver particles to functionalize the membrane, such as copper, graphene or zinc oxides, and amine moieties. Each attempt included in either kind has produced some notable results in killing, preventing, or repelling the bacteria while at the same time, left some unsolved points to be evaluated. In this review, the effects of metal nanoparticles and other materials on the antifouling properties of water treatment membranes are summarized.

• Economic and Environmental Geology
• /
• v.37 no.2
• /
• pp.185-193
• /
• 2004

A physical model experiment was conducted using a sand and gravel-filled tank model, to investigate the influence on the GPR response of LNAPL vapor phase effects in the unsaturated zone and of residual phase of LNAPL trapped in the saturated zone. Background measurements of GPR were made with only water in the tank using a fluctuating water table model. Gasoline was, then, injected into the bottom of the model tank to simulate a subsurface discharge from a leaking pipe or tank at depth, obtaining GPR data with rising and lowering of water table. Results from the experiment show the GPR sensitivity to the changes in the moisture content in the vadose zone and its effectiveness for monitoring minor fluctuation of the water table. The results also demonstrate a potential of GPR for monitoring possible vapor phase effects of volatile hydrocarbons in the vadose zone as a function of time, and for detecting the effects of residual phase of hydrocarbons in the water saturated system. In addition, the results provide the basis for a strategy that has the potential to successfully detect and delineate residual LNAPL contamination in the water-saturated system at field sites where the conditions are similar to those simulated in the physcial models described herein.

• Korean Journal of Ecology and Environment
• /
• v.46 no.1
• /
• pp.135-144
• /
• 2013

Blue-green algae blooms occurred during early winter in the North-Han River, Korea. Among blue-green algae, Anabaena spiroides were observed for approximately 33 consecutive days, between 28 November and 30 December, 2011. A. spiroides emerged from Lake Uiam to Lake Paldang, depending on the flow of the river has spread downstream. Changes of physical water environment like rising water temperature and increasing hydraulic retention time influenced the A. spiroides bloom. The A. spiroides bloom showed a very rapid increase in cell density, and a slow decrease: the cell density increased to a maximum of $11,325cells\;mL^{-1}$ in Lake Paldang (st. 5), and was completely disappeared after the water temperature dropped below $4^{\circ}C$. A decrease in water temperature was the most influential factor among all environmental parameters, for the reduction of A. spiroides cell density. The A. spiroides bloom was accompanied with the occurrence of very high concentrations of the odor metabolite geosmin. Geosmin reached the peak value of $1,640ng\;L^{-1}$ in Lake Paldang (st. 4). The geosmin concentration was very strongly correlated with cell numbers of A. spiroides.

• Korean Journal of Environment and Ecology
• /
• v.23 no.1
• /
• pp.50-55
• /
• 2009

To understand the status of the migrating Oriental Honey Buzzard(Pernis ptilorhynchus) in Korea, we carried out a preliminary study on the number and local movements of the Honey Buzzard from September 2005 to October 2007 at Hongdo Island, Jeonnam Province, Korea. A total of 702 Honey Buzzards in 2005, 404 individuals in 2006, and 659 individuals in 2007 were recorded during the fall migration season, but during the spring migration season only two and eight birds were observed in 2006 and 2007 respectively. The migrating Honey Buzzard showed peak numbers from 20 September to 5 October at the study site. According to observation of arrival time of538 Honey Buzzard in October 2007, a total of 2l6 birds(40.l %) were passing over Hongdo Island between 7:00 AM to 8:00 AM, rising skyward on columns of warm air. This suggests the use of thermal currents and avoidance of nocturnal movement for crossing water. They preferred moderate winds(<5 m/s in speed) from northwest, but the migrating number apparently decreased in case of strong winds (${\geqq}5 m/s$). This suggests that wind speed and direction are important environmental factors for migration of the Oriental Honey Buzzard. At present, it is unclear which breeding population(from north-eastern China or Japan) passes over Hongdo Island. Moreover, it is difficult to prove migration route and to understand migratory behaviors of the Oriental Honey Buzzard in Korea. To prove the breeding sites and routes of the migrants over the study site, we need more detailed and further studies such as satellite tracking researches.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.7
• /
• pp.739-745
• /
• 2005

Simultaneous denitrification and methanogenesis at various influent COD/Nitrate-N(below C/N) ratio was investigated with two different anaerobic sludges of which one was inoculated with glucose only and the other was inoculated with glucose and nitrate. Three different C/N ratios of 30, 20, and 10 were applied with each anaerobic sludge in serum bottles agitated in a rotary shaker to monitor the time related changes of amount of gas production and gas composition. Glucose was used as a single carbon source, which was adjusted to 1,000 mg/L as COD and potassium nitrate was used as a nitrogen source to adjust the each C/N ratio. COD removal by methanogenesis was dominant at higher C/N ratios, while COD removal by denitrification was dominant at lower C/N ratios. With the sludges cultured at C/N ratios below 10, SMA and SDNR rising different carbon substrates were investigated. The most efficient carbon substrate was acetate and the highest SMA and SDNR were 0.76 g COD/g VSS day with pure anaerobic sludge and 1.38 g ${NO_3}^--N/g$ VSS day with sludge cultured at C/N ratio of 5, respectively.

• Journal of the Korean Society for Railway
• /
• v.18 no.4
• /
• pp.309-316
• /
• 2015

The contribution of exterior devices such as bogie fairings and pantographs to running resistance was estimated on the basis of coasting tests at up to 350 km/h with the help of the Korean Next Generation High speed train (HEMU-430X). In order to assess the reduction of air resistance by nose car's bogie fairing, coasting tests were conducted with a removable bogie fairing at various speed ranges. And, the contribution of the pantograph to air resistance was also estimated with coasting tests that include the pantograph's rising and descent modes. The linear regression method was used to examine decelerations from time-velocity data and the equation of resistance to motion is proposed from the deceleration data. From the aerodynamic term of the equation of resistance to motion, the contribution to air resistance by nose car's bogie fairing and pantograph was estimated. The results show that the air resistance was reduced by about 3.8% by the nose car's bogie fairing. And, the 3.9% increase of air resistance by the pantograph (open knee mode) has been found.

• Journal of the Ergonomics Society of Korea
• /
• v.32 no.6
• /
• pp.517-528
• /
• 2013

Objective: The objective of this study was to suggest a multi-modal controller type for Smart TV Control. Background: Recently, many issues regarding the Smart TV are arising due to the rising complexity of features in a Smart TV. One of the specific issues involves what type of controller must be utilized in order to perform regulated tasks. This study examines the ongoing trend of the controller. Method: The selected participants had experiences with the Smart TV and were 20 to 30 years of age. A pre-survey determined the first independent variable of five tasks(Live TV, Record, Share, Web, App Store). The second independent variable was the type of controllers(Conventional, Mouse, Voice-Based Remote Controllers). The dependent variables were preference, task completion time, and error rate. The experiment consist a series of three experiments. The first experiment utilized a uni-modal Controller for tasks; the second experiment utilized a dual-modal Controller, while the third experiment utilized a triple-modal Controller. Results: The first experiment revealed that the uni-modal Controller (Conventional, Voice Controller) showed the best results for the Live TV task. The second experiment revealed that the dual-modal Controller(Conventional-Voice, Conventional-Mouse combinations) showed the best results for the Share, Web, App Store tasks. The third experiment revealed that the triple-modal Controller among all the level had not effective compared with dual-modal Controller. Conclusion: In order to control simple tasks in a smart TV, our results showed that a uni-modal Controller was more effective than a dual-modal controller. However, the control of complex tasks was better suited to the dual-modal Controller. User preference for a controller differs according the Smart TV functions. For instance, there was a high user preference for the uni-Controller for simple functions while high user preference appeared for Dual-Controllers when the task was complex. Additionally, in accordance with task characteristics, there was a high user preference for the Voice Controller for channel and volume adjustment. Furthermore, there was a high user preference for the Conventional Controller for menu selection. In situations where the user had to input text, the Voice Controller had the highest preference among users while the Mouse Type, Voice Controller had the highest user preference for performing a search or selecting items on the menu. Application: The results of this study may be utilized in the design of a controller which can effectively carry out the various tasks of the Smart TV.