• New & Renewable Energy
• /
• v.10 no.2
• /
• pp.12-18
• /
• 2014

The objective of this work is to produce solid biofuel from sawdust using the HTC (Hydrothermal carbonization) process. The HTC process of feedstock involves the raw material coming into contact with high temperature and pressurized water. The HTC process could produce gaseous, liquefied and solid products, but this study focused on solid product only as an alternative to coal. In this study, sawdust used for a feedstock and its moisture content was under 5%. Water was added with the feedstock to raise moisture content to 80% and also used catalysts. The HTC process was performed at temperature range from 200 to $270^{\circ}C$ and reaction time was 15 to 120 min. Rising temperature resulted in increasing the higher heating value (HHV) of HTC product. In case of adding catalyst, HHV of solid biofuel was higher and reaction occurred at lower temperature and pressure. Also, HTC solid product had been characterized and found to be hydrophobic, increased HHV (over 40%), and pelletized easily compared to raw material.

• Journal of Fisheries and Marine Sciences Education
• /
• v.26 no.1
• /
• pp.214-222
• /
• 2014

Hagfish Eptatretus burgeri is classified as a agnathans and has many different physiological properties compared with vertebrates. In this study, we examined effects of water temperature and salinity on blood properties and oxygen consumption in hagfish. In the experiment of water temperature change, hematocrit (Ht), red blood cell (RBC) and glucose of hagfish blood revealed the lowest values at $15^{\circ}C$. Oxygen consumption of hagfish had significantly increased with rising water temperature, and the increasing rate was twice as much when the temperature was manipulated every $5^{\circ}C$. Also, oxygen consumption during the night time (a short photoperiod) was significantly higher than that of the daytime. Q10 level was 3.50 in the light period and 3.92 in the dark period. No significant change in plasma glucose level was showned in changing salinity from 30 psu to 22 psu, while it had rapidly increased at 20 psu ($13.7{\pm}4.0mg/dL$) and thereafter all hagfish were dead at 18 psu. However, osmolarity, $Na^+$, $K^+$ and $Cl^-$ levels had significantly decreased when salinity decreased. This results are expected to develop the artificial rearing techniques of natural hagfish.

• Journal of Fisheries and Marine Sciences Education
• /
• v.26 no.1
• /
• pp.108-125
• /
• 2014

Although South Korea had managed fishery resources based on elements included in the fishery like fisheries licence, after agreeing on UN Convention on the law in 1999, it became inevitable to adopt TAC that regulates yield. Therefore, currently operating an indecisive system by maintaining the fisheries license system while applying TAC only to some fisheries. However, it became imperative to find ways to improve the current system as it dose not solve problems such as decrease of fishery resources and catch per unit effort, excessive input of fishing boats, rising costs for fishery management, and shortage of fishery population. For those reasons, it is time to review ITQs, which is recognized globally as the most innovative fisheries management system. To adopt the ITQs, it seems necessary to compare how the fisheries act of New Zealand which is currently most successfully operated and Fisheries Resources Management Act of Korea. To do so, in this study, the provisions on TAC of the two countries are compared to analyze the institutional necessity for Korea to adopt ITQs. The following conclusions have been made : First, it will be necessary to gradually expand the species and fisheries for which TAC is enforced, and accumulate correct data on fisheries resources. Second, while forcing traders to obtain license as well, the species and quantity of traded fisheries must be reported separately for cross-checking with the catch reported by the fisheries. Third, the number of observers must be increased and report the species and quantity of the catch to person in charge at the relevant port, and observers must check the report before disembarkation. Fourth, penalty for violating Fisheries resources management act must be enhanced, especially regarding false report of fishery activities and catch.

• Journal of Welding and Joining
• /
• v.31 no.5
• /
• pp.35-40
• /
• 2013

In this paper, we propose the Tangible Virtual Reality Representation Method to using haptic device and feature to morphology of created bead from Flux Cored Arc Welding. The virtual reality was started to rising for reduce to consumable materials and welding training risk. And, we will expected maximize virtual reality from virtual welding training. In this paper proposed method is get the database to changing the input factor such as work angle, travelling angle, speed, CTWD. And, it is visualization to bead from extract to optimal morphological feature information to using the Neural Network algorithm. The database was building without error to extract data from automatic robot welder. Also, the Neural Network algorithm was set a dataset of the highest accuracy from verification process in many times. The bead was created in virtual reality from extract to morphological feature information. We were implementation to final shape of bead and overlapped in process by time to using bead generation algorithm and calibration algorithm for generate to same bead shape to real database in process of generating bead. The best advantage of virtual welding training, it can be get the many data to training evaluation. In this paper, we were representation bead to similar shape from generated bead to Flux Cored Arc Welding. Therefore, we were reduce the gap to virtual welding training and real welding training. In addition, we were confirmed be able to maximize the performance of education from more effective evaluation system.

• Journal of Chest Surgery
• /
• v.32 no.10
• /
• pp.903-909
• /
• 1999

Background: The current study was undertaken to investigate the results of a modification in the conventional Maze III Procedure devised by the authors. The aim of the technical modification was in improving the left atrial contractility. Material and Method: Between July 1997 and December 1998, 34 patients with chronic atrial fibrillation for more than 1 year duration underwent a modified Maze III procedure. The assessment of the left atrial function was made by various echocardiographic measurements and SA nodal recovery was evaluated by HRV Holter monitoring. Result: All 34 patients were in sinus rhythm. On echocardiography, right atrial contraction was detected in 32 patients(94.1%) and left atrial contraction in 33 patients(97.1%). The echocardiographic A wave at 1, 6, and 12 months or more were 50.5$\pm$31.5, 62.1$\pm$25.1, 66$\pm$20.6 cm/sec, respectively, and the E wave measurements at the same time points were 152$\pm$31.1, 134.4$\pm$35.2, 133$\pm$27.5 cm/sec. The corresponding A/E ratios were 0.32$\pm$0.13, 0.48$\pm$0.18, 0.5$\pm$0.15, showing a rising trend. Treadmill evaluation at 6 months showed a mean 82% increase in heart rate after excising, and the SDNN and SDANN upon HRV Holter at 1 and 3 months postoperatively were 65.3$\pm$28.1/87.8$\pm$27.2 ms, and 60.0$\pm$24.1/83.4$\pm$25.7 ms, respectively, showing a predoinant autonomic recovery in the parasympathetic system(PSDNN = 0.01, PSDANN =0.015). Conclusion: The results of our data suggest that the current modification in the conventional Maze III Procedure was efective in enhancing the postoperative left atrial contractility.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.62-62
• /
• 2011

현재 TFT의 주요 재료로 사용되는 비정질 실리콘은 전하 이동도가 매우 작아 고속 스위칭과 같은 고성능을 구현하기 어려우며 이동도 향상을 위해 고온 공정이 적용되야 하는 단점을 가지고 있다. 이러한 문제를 해결하기 위해 전하 이동도가 큰 박막재료를 바탕으로 박막 트랜지스터의 연구개발이 필요하며 이를 위한 해결책 중 새로운 스위칭 동작원리를 제공하며 고 이동도를 갖는 비정질 칼코지나이드 재료가 각광 받고 있다. 본 연구에서는 박막 스위칭 소자 응용을 위해 GeTe 재료를 기반으로 Se을 치환하여 GeSexTe1-x 박막을 제작한 후 소자의 전기적 특성을 평가하였다. GeTe 박막의 결정화 온도는 $187^{\circ}C$였으며 Se을 점진적으로 첨가한 GeSexTe1-x (X=0.2, 0.4, 0.6) 박막의 경우 각각 $213^{\circ}C$, $240^{\circ}C$, $287^{\circ}C$로 측정되었다. 이는 상대적으로 Ge과 Se의 결합에너지가 Ge과 Te의 결합에너지 보다 크기 때문에 Se 함량의 증가에 따라 비정질상의 안정성이 증가된 것으로 판단된다. 비교적 열적 안정성이 높은 3가지의 각각 다른 Se함량을 가진 Ge1.07 Se0.50 Te0.43, Ge1.07 Se0.68 Te0.26, Ge0.95 Se0.90 Te0.15의 소자를 제작하여 스위칭 특성을 분석하였다. GeTe의 경우 전형적인 메모리 스위칭 특성이 나타난 반면 위의 조성을 갖는 박막의 경우 반복적인 문턱 스위칭 특성을 보였다. 이는 Se이 첨가되면서 열적 안정성의 증가로 인해 스위칭이 일어난 후에도 비정질 상을 유지하기 때문이라 판단된다. 각각 제작된 소자에서 인가 전압의 증가와 펄스의 rising time 감소에 따라 더 빠른 스위칭 시간을 보였으며 Se함량이 감소함에 따라 스위칭 전압 또한 감소하는 것을 확인하였다. On 상태의 저항은 Se 함량에 따라 크게 차이가 없었지만 Off 상태의 저항은 Se 함량이 증가됨에 따라 증가되는 것을 확인하였다. 결과적으로 Se 함량에 따른 스위칭 특성의 최적화를 통해 고성능 스위칭 소자에 적용될 수 있을 것이라 판단된다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.2
• /
• pp.117-124
• /
• 2012

Due to recent urban maintenance project for the aged towns, the reconstruction of apartments into super-high-rise and high-rise apartment structures has been approved for concentrated use of land, and accordingly the infringement on sunshine for nearby residential area is rising as a social issue. Especially the educational environment conditions according to infringement on sunshine in educational facilities are posing many problems. Accordingly in this study, for such sunshine analysis of educational environment, Auto $CAD^{(R)}$ software has been used to construct the 3D model for the educational facility structures. And with the simulation technique, the windows and the schoolyard of the education facility were set to be the lighting standard surface to take measurements for the sunshine environment of the educational facilities by the minute from 8:00AM until 4:00PM for the sunshine amount by true solar time according to the movement of the sun. Also, the sunshine environment of the education facility according to the damage before/after new construction of apartments was charted, and through comparison with the video produced by sun shadow projection method, the sunshine amount of the educational environment could be verified. In future, it is expected to be efficiently used in the sunshine analysis of education environment utilizing such simulation techniques.

• Journal of the Society of Disaster Information
• /
• v.10 no.1
• /
• pp.141-150
• /
• 2014

This study analyzed monthly excavation length and amount of time occupied by the work item based on drilling reports to record the entire work process of TBM tunnel site. TBM equipment( ${\varnothing}2.6m$, ${\varnothing}3.0m$, ${\varnothing}3.5m$, ${\varnothing}3.8m$) was developed by WIRTH company in Germany. In addition, This study analyzed rising expected monthly excavation length based on the lowest loss rate of operating shifts among the field of nine. Analysis results are confident to be a useful tool when Planning and Managing TBM method construction to the primary planning steps in the field similar to geological conditions and analyzed geological conditions.

• Journal of Broadcast Engineering
• /
• v.22 no.1
• /
• pp.95-106
• /
• 2017

Interest in companion screen services and high-definition television broadcasting services are rising along with the advanced of digital broadcasting communication technology. Not only providing good-quality broadcasting services in the main screen, but also creating added values of companion services in the secondary screen are important. In this paper we suggest a platform and a related authoring tool generating adaptive companion screen services according to user contexts. The Platform providing adaptive companion screen services based on user environment is designed and implemented for real service market. Proposed platform organizes a higher quality content service considering both user contexts and demands of service providers in real time, and the related authoring tool enables a novice user interface designer and service director to make adaptive user interfaces quickly and easily. We developed and simulated this platform in accordance with Korean UHD IBB standard which provides interactive service applications.

• Journal of the Institute of Convergence Signal Processing
• /
• v.19 no.1
• /
• pp.14-19
• /
• 2018

Recently, the smart health care industry has been rising rapidly and interest and efforts for public health have been greatly increased. As a result, the public does not visit medical specialists and medical facilities, but the desire to check their health condition in everyday life is increased. Therefore, many domestic and foreign companies continuously research and develop wearable devices that can measure body activity information anytime and anywhere And the market. Especially, it is used for heart activity measurement device using pulse wave sensor and electrocardiogram sensor. However, in this study, a monitoring system that can detect cardiac activity using cardiac sounds, heart sound measurement rather than pulse wave measurement and electrocardiogram measurement, was performed and its performance was evaluated. Experimental results confirmed the predictability of cardiac heart rate and heart valve disease during daily living.