• Journal of the Korean Society of Safety
• /
• v.20 no.1 s.69
• /
• pp.94-100
• /
• 2005

The plasma, ionized gas state, is generally composed as the 4th state in the universe. Generating the plasma artificially has been studied by spending energy and it has been applied so much in human's life. There are several merits to modify the surface of polymer using plasma. Above all, plasma maintains the properties of polymer itself, but changes the properly of polymer surface only. Also, it is the environmentally fraternized because there are no waste processing from organic solvent. Furthermore, it is possible that continuous automated-processing in case of high-pressure plasma. Therefore, we have tried the reforming of surface to rise the adhesive strength between the material of polymer, and have experimented rising the adhesive strength through peel strength by virtue of processing time and using gas, of course, confirmed the change of polymer surface through measuring the contact angle analysis and scanning electron microscopy(SEM).

• Korean journal of food and cookery science
• /
• v.8 no.3
• /
• pp.297-307
• /
• 1992

This study has investigated a scientific approach to the manufacture of Yackwa, made by different frying conditions and has assessed texture characteristics through sensory evaluation and instrumental test. A standard Yackwa was made by frying at 150$^{\circ}C$ for 8 minutes and then soaking for 10 minutes in the newly developed syrup whose viscosity and sweetness were similar to expensive honey. The mixing ratio of the developed syrup was corn syrup: sugar: dextrose=32 : 1.5 : 1 (by weight), and me syrup was double-boned in a water bath for 20 minutes and men cooled to 25 C. As me results of sensory evaluation and instrumental test for Yackwa made by various frying conditions, the lower the frying temperature or me longer the frying time was the higher values of hardness and fracturability, while adhesiveness was the lower in almost all conditions. In the sensory evaluation of Yackwa with the similar outer color, mere were significant differences in me inner color, Crispiness and levels of rising and cracking.

• Journal of Families and Better Life
• /
• v.21 no.3
• /
• pp.123-131
• /
• 2003

The potential of information and communication technologies has already had a profound impact on many ways of our living and society. To catch up with this trend, Korean government has demonstrated the vision for informatization called‘Cyber Korea 21'/'e-Korea’project and has fully supported the education for informatization which is one of the key factors to reduce the digital divide. But, In spite of developing a variety of training programs with different target groups and policy objectives, a digital divide remains in some cases even while Internet access and computer ownership are rising rapidly for almost all groups. For example, the noticeable divides still exists between men and women. To accelerate the process of women informatization, which we believe to be major contributors for the high quality of life for women, we need to promote full-time housewives to become aggressive information users and producers. Internet shopping, for example, might be a good starting point for motivating women to become active information users. In this paper, we present a model for explaining the factors affecting the degree of satisfaction of housewives from internet shopping. Based on data collected from a questionnaire survey from housewives in Seoul, we conclude that the perceived usefulness, ease of use and the playfulness significantly affect the level of satisfaction, but the playfulness does not directly affect the intention to revisit and purchase. In addition, we found out that the perceived usefulness is affected by efficiency, attitude and easy to access. We also provide other interesting statistical results and implications.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2003.05a
• /
• pp.69-72
• /
• 2003

This study is intended to investigate the fundamental properties of concrete which AE water reducing agent for reduction of bleeding is used, and the properties of bleeding reduction. According to the results, when the adding ratio of AE water reducing agent for reduction of bleeding increases, a range of normal fluidity and aimed air content are satisfied, setting time is faster than that of normal AE water reducing agent. And bleeding amount decreases, bleeding speed is highest between 60 and 90 min, and sinking depth increases drastically in 60 min. When. AE water reducing agent for reduction of bleeding is added, compressive strength shows a slight variation by air content, but there is not a large influence by addition of AE water reducing agent for reduction of bleeding. Synthetically, it proves that AE water reducing agent for reduction of bleeding satisfies aimed air content in the range of normal slump and can reduce only bleeding without quality variation of compressive strength.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.65-72
• /
• 2001

With the recent rising project complexities and competitive environments in the construction projects, a risk management is recognized as more important management tool than the others. However, as most risk management techniques applied to the construction projects are centered around their initial phases and risk analyses, they are not developed into general project management technique such as time management, cost management and quality management, etc., that are usually applied in the process of construction. Thus, this paper proposes a response process to construction project risks based on the risk threshold and its calculation methodology applying a concept of VaR to establish risk management as general management technique in the construction projects.

• Geotechnical Engineering
• /
• v.3 no.3
• /
• pp.49-62
• /
• 1987

The settling behavior of marine fluid mud in the west seaside of Korea has been studied with theoretical analysis and experimental technique. This paper describes laboratorial experiments on the sedimentation and the deposition of soil particles in seawater, with measurement of velocity of interface, the water contents, the settlement. And the reseults are compared with an earlier theoretical research, the hindered settling theory of Kynch, McRoberts and Nixon. According to the results the process of Banweol mud sedimentation showed the typical mode of the hindered settling under the condition of initial water content, wo=1000%. Also, the falling rates of fluid mud interface from initial settling height vs. the rising rates of soil deposit from the bottom of the test tub were measured by the function of time, the correlati tranship of them demonstrated as a straight line and obtained an experimental formula.

• Proceedings of the KIEE Conference
• /
• 1998.07e
• /
• pp.1767-1769
• /
• 1998

We have established a pulsed electron beam generation system with an energy of 200[keV], pulse repetition rate of 200[Hz], and several tens of [${\mu}s$] pulse width. The system is characterized by a cold cathode that is simpler than the hot cathode. Target object does not need to be scanned because of large aperture electron beam of 300[$cm^2$]. Electron source is secondary electrons that are generated when the ions from the glow discharge collide on the cathode surface. In this paper, the discharge current characteristics are investigated experimentally as a function of He gas pressure in order to obtain stable glow discharge. And computer simulations are carried out as a preliminary study for the development of low energy large aperture electron beam generator. The variation of electon beam current is investigated as a function of rising time of high voltage when 20[kV] potential is applied in 20[mTorr] pressure.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.11a
• /
• pp.111-115
• /
• 2002

To understand the discharge characteristics in AC-PDP, it is necessary to study on the wall charge behavior. But, it is difficult to measure the wall charge directly. In this paper, the V-Q Lissajous' figure is used to measure the wall charge indirectly and analyze the wall charge behavior. With the V-Q Lissajous' figure, the discharge characteristics of AC-PDP are studied according to vary driving conditions, such as the frequency, pulse duty ratio, and rising & falling time. As a result, the V-Q Lissajous' figure is used to measure the discharge characteristics of the AC-PDP. It is confirmed that firing initial voltage and firing final voltage for discharge are effected by the aboved variables. Related with the wall voltage generation, it is thought that the difference of the slope at the V-Q Lissajous' figure is caused by charged ions inside the dielectric layer.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.1
• /
• pp.101-106
• /
• 2018

This study proposes a method of controller design for precise position control in the use of solenoid which is widely used in industrial field. First, we design a Luenberger's observer that can accurately estimate the disturbance and set the appropriate gain. Based on the observed state, a fractional PD controller is designed and applied to the position control. As a result, the fractional order controller can obtain almost the same control performance even if the target position is different. In addition, it was confirmed that the position error of the steady state is within 0.1 [%] and the rising time is within about 0.05 second.

• Journal of Integrative Natural Science
• /
• v.4 no.4
• /
• pp.298-310
• /
• 2011

Recently the traffics and transportation hazzards by fog are tremendously Increased. There occurred the greater traffic disaster by Dense Fog of Oct.2006. In this study frequent occurrences of advection fogs centerd over Honam Prov are investigated. Increment of transportation during the Fog period for 1996~2005(decade)are statistically analyzed with Honam Prov.'s fogs. For Honam west coast(Gunsan, Mokpo), inland of Honam(Junju, Gwangju, Suncheon), Honam south coast(Wando, Yepsu), Wind, Dew point, Diff. of air and sea temp. relative humidity are classified between 12 hours before and on time of fog with three Dimensional Analysis System(KLAPS). High frequencies of advection-radiation Fog occurrence in western Coasts except for Suncheon. The application of fog characteristics analyzed by KLAPS for denser fog over the western coast in Fall to Fog prediction and special advisory issues. The advection-radiation fog can occure favorably when the moisture index is less than $2^{\circ}C$, relative humidity is greater than 90%, but the moisture depth is under 1.5 km. In addition when the height of 925 hPa is rising, then fog occurs, but for sinking is disappearing.