• Journal of the korean society of oceanography
• /
• v.32 no.3
• /
• pp.156-161
• /
• 1997

The biogeochemical cycle of silver has rarely been reviewed, even though the silver ion (Ag$^{\times}$) is extremly toxic to some organisms. Its concentration is still rising sharply because of increased anthropogenic activity, specifically the discharge from the film industry (mainly, silver thiosulfate: Ag (S$_2$O$_3$)${^3-}_2$). Recently, a number of researchers have quantified the major fluxes and reservoirs of silver in the open ocean, bays, and estuaries. A review of the available information for Ag cycling in the open ocean shows that the riverine input (from human activity and weathering processes: 7${\times}$10$^6$ kg/yr and 5${\times}$10$^6$ kg/yr, respectively) is the dominant source of Ag to estuarine and coastal regions. Most of the silver (90% of riverine input silver) is removed in coastal sediments by the physical-chemical character of silver due to its high partitioning with particulate matter. On the other hand, in the open ocean the atmospheric input (wet and dry deposition: 1.48${\times}$10$^6$ kg/yr and 1.94${\times}$ 10$^5$ kg/yr, respectively) becomes more important as a source of silver than riverine input. The residence time of silver calculated from available data is 1250 yrs in the deep ocean below 500 m, but only 3 yrs in the surface ocean.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.7 s.172
• /
• pp.130-136
• /
• 2005

A new MR cylinder with built-in valves using MR fluid (MR valve) is suggested and fabricated fur fluid control systems. The MR fluid is a newly developed functional fluid whose obvious viscosity is controlled by the applied magnetic field intensity. The MR cylinder is composed of cylinder with small clearance and piston with electromagnet. The differential pressure is controlled by the applied magnetic field intensity. It has the characteristics of simple, compact and reliable structure. The size of MR cylinder and piston has $\varphi30mm\times300mm$ and $\varphi28.5mm\times120mm$ in face size, respectively and 0.8mm in gap length. Through experiments, it was found that the differential pressure is controlled by the applied magnetic field intensity under little influence of the flow rate, which corresponds to a pressure control valve. The differential pressure of 0.47MPa was obtained with the input current of 1.5A. The rising time was 2.3s in step response of a manipulator using the MR cylinder. The effectiveness of the MR cylinder was also demonstrated through the position control.

• Journal of the Korean Society of Physical Medicine
• /
• v.10 no.1
• /
• pp.91-97
• /
• 2015

PURPOSE: In this study investigated the thermal effect in tissue mimicking phantom by the material of the ultrasonic transducer in low intensity sonication. METHODS: The material of the ultrasonic transducer was made of ceramic, stainless steel, aluminum. Korea Testing Laboratory was measured of the three kinds of materials the total output of the ultrasonic transducer. Each material was measured core temperature and the actual output depending on the type of transducer. Agarose tissue mimicking phantom and silicone tissue mimicking phantom was made. Transducers made of three kinds of materials were emitted in the phantom. It is shown as a graph about time and temperature and the surface temperature rising speed and deep temperature rise rate was investigated. RESULTS: Ceramic transducers were highest output. Higher than the stainless steel transducer, aluminum had the lowest total output. Deep temperature was the highest in the ceramic transducer, and the surface temperature was the highest in the stainless steel transducer. Thermal images of ceramic transducer showed that a valid output is formed deeper wider than the metal. CONCLUSION: Ceramic transducer is confirmed the excellence than the metal transducer in deep thermal effect and the actual output of the ultrasound.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.3
• /
• pp.490-508
• /
• 2013

One of the most important scalability issues facing the current Internet is the rapidly increasing rate of BGP updates (BGP churn), to which route flap and path exploration are the two major contributors. Current countermeasures would either cause severe reachability loss or delay BGP convergence, and are becoming less attractive for the rising concern about routing convergence as the prevalence of Internet-based real time applications. Based on the observation that highly active prefixes usually repeatedly explore very few as-paths during path exploration, we propose a router-level mechanism, Path Exploration Aggregation (PEA), to scale BGP without either causing prefix unreachable or slowing routing convergence. PEA performs aggregation on the transient paths explored by a highly active prefix, and propagates the aggregated path instead to reduce the updates caused by as-path changes. Moreover, in order to avoid the use of unstable routes, PEA purposely prolongs the aggregated path via as-path prepending to make it less preferred in the perspective of downstream routers. With the BGP traces obtained from RouteViews and RIPE-RIS projects, PEA can reduce BGP updates by up to 63.1%, shorten path exploration duration by up to 53.3%, and accelerate the convergence 7.39 seconds on average per routing event.

• Water for future
• /
• v.27 no.2
• /
• pp.85-96
• /
• 1994

Numerical instability of Preissmann scheme is studied for unsteady flow analysis in a natural river. The solution strategies to overcome the instability problems are presented in this paper. The main causes of numerical instability of Preissmann scheme are transition flow, abrupt change in cross section, in-appropriate roughness coefficients, time step and distance step, rapidly rising hydrograph, dry bed and so on. Transition flow model is proposed for the analysis of the transition flow which changes from subcritical to supercritical or conversely. The subcritical and supercritical reaches are groped in the channel, then appropriate boundary conditions are introduced for each reach. The transition flow analysis produces stable solutions in calculating through the various transition conditions. Verification with an actual river system is necessary in the future.

• Journal of the Korean Society of Industry Convergence
• /
• v.4 no.3
• /
• pp.311-318
• /
• 2001

The application of a pulsed power system is being extended to a environmental and industrial fields. The non-dissolution waste water pollutants from industrial plants can be processed by applying high voltage pulses with a fast rising time (a few nanoseconds) and short duration (nano to microseconds) in a pulsed corona discharge reactor. The nano-pulse generator with a magnetic switch has been developed. Its corona current in load can be adjusted by pulse width and repetition rate. we investigated the performance of the nano-pulse generator using the dummy load which is composed of resistor and capacitor equivalent to the actual reactor. This paper descibes the electrical characteristics of the nano-pulse generator that produces a 300 ns pulse at maximum repetition rate of 400 pps with a voltage of 40 kV across a $640{\Omega}$ load. In this paper we briefly discuss a configuration of system and test results.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.11
• /
• pp.4519-4533
• /
• 2015

Hypertext Transfer Protocol (HTTP) adaptive streaming has become a new trend in video delivery. An HTTP adaptive streaming client needs to effectively estimate resource availability and demand. However, due to the bitrate of the video encoded in variable bitrate (VBR) mode, a bitrate mismatch problem occurs. With the rising demand for mobile devices, the likelihood of cases where two or more HTTP adaptive streaming clients share the same network bottleneck and competing for available bandwidth will increase. These mismatch and competition issues lead to network congestion, which adversely affects the Quality of Experience (QoE). To solve these problem, we propose a video rate adaptation scheme for the HTTP video streaming to guarantee and optimize the QoE. The proposed scheme estimates the available bandwidth according to the bitrate of each segment and also schedules the segment request time to expedite the response to the bandwidth variation. We used a multi-client simulation to prove that our scheme can effectively cope with drastic changes in the connection throughput and video bitrate.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.544-547
• /
• 2002

According to the rising of national economic level. domestic consumption of vegetables having high additive values is increased continuously due to increased consumption of meat in last decade. These vegetables are produced almost in this country and are limited to import from neighbor countries in due of high transportation expenses for storing in refrigerated container. It is very important to mechanize the harvest work, forming more than 30% for their production cost, in order to cultivate variable vegetables at the same time according to their harvesting seasons. In this state its former harvest methods, with using of human power or semi-automatic harvest, caused to increase their production cost due to high labor cost and low working efficiency. The former onion harvest being operated almost by semi-automatic plant distributer mechanism have many limit and troublesome for cultivation spaces, vinyle mulched ridge, gravel mixture in soil. Therefore, it is necessary to develope a fully automatic and self-running situation and overcome above handicaps, even in the farm covered with vinyle house or mulch sheets. This newly developed onion harvest can be applied to plant various young trees and will be able to export together with onion haying their competition in the worldwide market in which the culinary vegetable method or farm conditions is similar to our country.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.12
• /
• pp.1306-1314
• /
• 2009

By rising the interests of the railroad, It has been required the research about railroad structure. And since 2000, the study about railway bridges caused by steel box railway bridges has been only 0.2 %. So I was hard to find out about steel box railway bridges. In this study, I evaluate and analyze 4 types(KTX, Saemaeul, Mugunghwa, Freight) of dynamic caused by train loading, natural frequency and damping ratio, verticality deflection and verticality acceleration, end slope deflection, impact factor for dynamic characteristics analysis. natural frequency was measured 2.45 Hz~3.34 Hz and damping ratio revealed for 1.26~2.84 %. Maximum verticality deflection(4.86 mm) was sufficiently satisfied the design criteria(30.1 mm), but in the case of verticality acceleration's respond, design criteria BRDM(bridge design manual) & CTRL presentation derive rail limit value 0.35 g be more than value 6 time recorded, maximum was measured 0.49 g in 3 kinds of train(KTX, Saemaeul, Mugunghwa), except for Freight. Survey impact factor of Experiment bridge was 0.20 which is measured when the KTX(15:04) was driving. impact factor is enough contended with design criteria 0.29 which is presented in domestic railway design criteria and thoroughly guarantee the dynamic stability.

• Journal of the Korean Society of Food Culture
• /
• v.30 no.5
• /
• pp.576-586
• /
• 2015

This study compared and analyzed the consumption and amount of red pepper used in Baechu Kimchi (cabbage Kimchi) especially the amounts used in Kimchi recipes with respect to the passage of time from the 1930s to the 2010s. In this analysis, 78 recipes for cabbage Kimchi were taken from books, daily newspapers and magazines from 1930 to 2014 and collected for comparison. The result of the study showed that the consumption and inclusion of dried red pepper powder in cabbage Kimchi increased. The average consumption of red pepper in the 1930s was 5.75 g, and the number went up to 8.83 g in the 1940s, to 13.8 g in the 1950s, and to 20.25 g in the 1960s. The amount dramatically increased from 1970 to 1980 (53.37 g) and kept rising until 2010 (71.26 g). The average consumption of red pepper in cabbage Kimchi in the 2010s is about 12 times that of the 1930s.