• Proceedings of the IEEK Conference
• /
• 2001.06e
• /
• pp.33-36
• /
• 2001

An automatic TCXO frequency-temperature test apparatus was firstly developed by using thermoelectric device may. The developed system swing stably the test temperature range from -40$^{\circ}C$ to +80$^{\circ}C$ for about 1 hour The rising temperature ratio was fairly linear with time in this test temperature range. The temperature could be controlled error in error range of ${\pm}$0.05$^{\circ}C$ in this system. The frequency-Temperature properties of TCXO or the thermoelectric properties of other electric device.

• Journal of the Korean Institute of Navigation
• /
• v.15 no.3
• /
• pp.35-51
• /
• 1991

The primary purpose of this study is to point out the rising problem from which the insured value is remarkably different from the sound value of the ship in the Institute Time Clauses-Hulls(1. 10. 83.) and that of the ship in the Marine Insurance Act, 1906. Its secondary purpose is to suggest remedial methods for these problems and to contribute to the reduction of premium for shipowners.

• Proceedings of the KIPE Conference
• /
• 2018.11a
• /
• pp.68-70
• /
• 2018

본 논문에서는 무선전력전송시스템에서 Double-sided와 semi-bridgeless 정류기의 통합모델링 및 설계를 제안한다. 제안한 방식은 통합 모델링을 통해 제어기설계가 가능하며, 이를 통해 추가 회로가 없이 안정적인 출력전압제어가 가능하다. 본 논문에서는 구현된 모델링의 유효성 및 제어기 설계를 시뮬레이션에서 전압지령 변경과 Rising time 비교를 통해 검증한다.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.64 no.4
• /
• pp.199-206
• /
• 2015

A rising attention is paid to the railway system in many countries. KOREA is also of the opinion that the railway has to play a more important role in the near future to face up to the problems that increase gradually in the transport sector. To attract more traffic to the rail networks, it is important for rail modes to have running time competitiveness. Tilting trains, where it is possible to tilt the car-body towards the center of the curve, are a less expensive alternative to shorten travelling times on existing lines. Running time for tilting train is one of the most important factors, with which passenger demand forecasting or economic feasibility analysis will be done. This paper evaluates the speed limitation of tilting train around curves and also presents calculation process of its simulated possible running time. Then the adequacy of estimated time is verified with running time for Korean protype tilting train TTX (Tilting Train eXpress) by actual test run. As a case study, the estimated running time for the production version of tilting train and its time saving are presented compared with 2012's conventional Saemaul trains and non-tilting trains on the Gyeongbu line in the Korean rail network.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.4
• /
• pp.289-294
• /
• 2011

Digital redesign is yet another efficient tool to convert a pre-designed analog controller into a sampled-data one to maintain the analog closed-loop performance in the sense of state matching. A rising difficulty in developing a digital redesign technique for trackers with time-varying references is the unavailability of a closed-form discrete-time model of a system, even if it is linear time-invariant. A way to resolve this is to approximate the time-varying reference as a piecewise constant one, which deteriorates the state matching performance. Another remedy may be to decrease a sampling period, which however could numerically destabilize the optimization-based digital redesign condition. In this paper, we develop a digital redesign condition for time-varying trackers by approximating the time-varying reference through a triangular hold and by introducing delta-operated discrete-time models. It is shown that the digitally redesigned sampled-data tracker recovers the performance of the pre-designed analog tracker under a fast sampling limit. Simulation results on the formation flying of satellites convincingly show the effectiveness of the development.

• Journal of Biosystems Engineering
• /
• v.33 no.2
• /
• pp.115-123
• /
• 2008

This study was conducted to develop an automatic soil water content control system for greenhouse, which consisted of drip irrigation nozzles, soil water content sensors, an on/off valve, a servo-motor assembly and a control program. The control logic adopted in the system was Ziegler-Nichols algorithm and rising time, time constant and over/undershoot ratio as control variables in the system was selected and determined by various control experiments to maintain small delay time and low overshoot. Based on the experimental results, it was concluded that the control system developed in the study could replace the unreliable conventional greenhouse soil water management.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.322-322
• /
• 2016

Phase change memory (PCM) has attracted much attention as one of the most promising candidates for next-generation nonvolatile memory. In that regard, the purposes of the study are to propose reference of effective pulse parameter to control phase switching operation and to invest the effect of nitrogen doped in PCM materials for improved cycling stability and economic energy consumption. Switching operation of PCM is affected by electric pulse parameter and as shown in figure.1 are composed to RT(rising time), ST(setting time), FT(falling time) and the effect of these parameter was precisely investigated. Transmission electron microscope (TEM) was used to confirm fine structure and retention cycle test was conducted to confirm reliability. Finally improvement reliability and economic power consumption in quantitatively are obtainable by optimum pulse parameter and nitrogen doping in GST material. these study is related to the engineering background of other semiconductor industries and it have confirmed to possibility further applications.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.2
• /
• pp.960-973
• /
• 2018

This paper presents design for error correcting algorithm of the time of flight (ToF) detection value in the light detection and ranging (LIDAR) system sensor. The walk error of ToF value is generated by change of the received signal power depending on distance between the LIDAR sensor and object. The proposed method efficiently compensates the ToF value error by the independent ToF value calculation from the received signal using both rising point and falling point. A constant error of ~0.05 m is obtained after the walk error correction while an increasing error up to ~1 m is obtained with conventional method.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2005.11a
• /
• pp.39-44
• /
• 2005

In recent years, embedded systems have become so complex and the development time to market is required to be shorter than before. As embedded systems include more functions for new services, embedded software gradually grow in size, and development costs and time are increasing. In order to overcome this serious matter, we need a customized design and test technique for embedded software. In this paper, we present a software architecture style for embedded software. It facilitates the composition of reusable functions and helps developers to reduce development time. Because the costs associated with revealing errors of embedded software in applications are rising. we propose a test method and tools for target environments.

• Proceedings of the KIEE Conference
• /
• 2002.07a
• /
• pp.223-225
• /
• 2002

In this paper, we designed fuzzy legit controller(FLC) for HVDC current control using genetic algorithm. The proposed method was applied to HVDC power system simulator in Korea Electrotechnology Research Institute(KERI). We are adjusted input/output gain of FLC by real-time using genetic algorithm. Experimental results show that FLC has the better control performance than PI controller in terms of settling time, rising time.