• Fire Science and Engineering
• /
• v.15 no.2
• /
• pp.59-79
• /
• 2001

The paper proposes alternatives for fire safety in architectural planning through heat-smoke distribution related to openings so that we decrease casualty and property loss by fire and lay a great emphasis on building high-rise apartments with consideration of fire safety in Korea. An analysis program(HFA-Heat Fluid Analysis) is built to perform simultaneously numerical analysis and experimental analysis on rooms, units and buildings. In consequence, on the first, fire prevention methods are required to be set up related to openings for design rooms since the flow of heat and smoke is influenced by the type of openings in high-rise apartments. Second, the numerical analysis showed that different planning types cause to show differences in the spreading time of heat and smoke to design the units of high-rise apartments. On the third, each unit building showed different fire behavior depending on openings by numerical analysis and small scaled experiment on heat and smoke flow.

• International Journal of High-Rise Buildings
• /
• v.9 no.3
• /
• pp.273-282
• /
• 2020

An innovative high-rise timber-concrete hybrid structure was proposed in previous research, which is composed of the concrete frame-tube structure and the prefabricated timber modules as main structure and substructures, respectively. Considering that the timber substructures are built on the concrete floors at a different height, the floor response spectrum is more effective in estimating the seismic response of substructures. In this paper, the floor response spectra of the hybrid structure with different structural parameters were calculated using dynamic time-history analysis. Firstly, one simplified model that can well predict the seismic response of the hybrid structure was proposed and validated. Then the construction site, the mass ratio and the frequency ratio of the main-sub structure, and the damping ratio of the substructures were discussed. The results demonstrate that the peaks of the floor response spectra usually occur near the vibration periods of the whole structure, among which the first two peaks stand out; In most cases, the acceleration amplification effect on substructures tends to be more evident when the construction site is farther from the fault rupture; On the other hand, the acceleration response of substructures can be effectively reduced with an appropriate increase in the mass ratio of the main-sub structure and the damping ratio of the substructures; However, the frequency ratio of the main-sub structure has no discernible effect on the floor response spectra. This study investigates the characteristics of the floor response spectrum of the novel timber-concrete structure, which supports the future applications of such hybrid structure in high-rise buildings.

• Wind and Structures
• /
• v.37 no.3
• /
• pp.211-227
• /
• 2023

To investigate the non-Gaussian feature of fluctuating wind pressures on rectangular high-rise buildings, wind tunnel tests were conducted on scale models with side ratios ranging from 1/9~9 in an open exposure for various wind directions. The high-order statistical moments, time histories, probability density distributions, and peak factors of pressure fluctuations are analyzed. The mixed normal-Weibull distribution, Gumbel-Weibull distribution, and lognormal-Weibull distribution are adopted to fit the probability density distribution of different non-Gaussian wind pressures. Zones of Gaussian and non-Gaussian are classified for rectangular buildings with various side ratios. The results indicate that on the side wall, the non-Gaussian wind pressures are related to the distance from the leading edge. Apart from the non-Gaussianity in the separated flow regions noted by some literature, wind pressures behind the area where reattachment happens present non-Gaussian nature as well. There is a new probability density distribution type of non-Gaussian wind pressure which has both long positive and negative tail found behind the reattachment regions. The correlation coefficient of wind pressures is proved to reflect the non-Gaussianity and a new method to estimate the mean reattachment length of rectangular high-rise building side wall is proposed by evaluating the correlation coefficient. For rectangular high-rise buildings, the mean reattachment length calculated by the correlation coefficient method along the height changes in a parabolic shape. Distributions of Gaussian and non-Gaussian wind pressures vary with side ratios. It is inappropriate to estimate the extreme loads of wind pressures using a fixed peak factor. The trend of the peak factor with side ratios on different walls is given.

• Korea Trade Review
• /
• v.42 no.1
• /
• pp.1-25
• /
• 2017

By applying the AHP(Analytic Hierarchy Process), we have analyzed the importance and the order for priorities to the management risk factors of Korean SMEs & Venture companies in China. The major management risk factors of manufacturing companies were the rise in labor costs followed by fierce competition in the marketplace, problems involved with human resource management and the rise in the cost of materials. In the case of companies manufacturing electronic products, the rise of labor costs and alteration in government's tax policy were seen as the main risk factors. In the case of chemical product manufacturing companies, the reinforcement of environmental protection law and in automobile component manufacturing companies, apart from the rise in labor cost, the increase in raw materials costs were analyzed as the main risk factors. While considering the time period, the main risk factors of the companies that entered China in the 1990's were fierce competition and alteration in government's tax policy and for the companies that entered China in the 2000's, increase in raw material cost, the rise in labor cost etc were analyzed to be the main risk management factors.

• International Commerce and Information Review
• /
• v.14 no.3
• /
• pp.75-96
• /
• 2012

China will replace the global governance of the 21st century in 2050. The rise of China provide the Chinese development model to other developing countries. There are positive element and disability element in China's 'peaceful rise' strategy at the same time. Success of the reform and opening up, market liberalization, economic interdependency, economic globalization, stability of ruling power, consolidation of one-party rule and soft power increase are the promotions of peaceful rise. China's rise as a power nation begins by regaining the superpower status in East Asia. East Asia is a lebensraum assuring a continuing growth to China. For this lebensraum, China shows an interest in institutionalization of regional economic cooperation. The core values of ASEAN, namely the mutual respect, harmonious coexistence, co-prosperity, egalitarianism and pluralism are in conform to China's policy of harmonious world and peaceful coexistence. Through this common value the tension in East Asia will be alleviated. By the regional hegemony strategy based on soft power and economic success, China will try to regain the past glorious position. Attaining status as a coordinator of the world rule will be based on the success of the East Asian strategy. Korea and other neighboring countries will be the best beneficiary countries of the China's rise strategy. China's rising strategy will have a profound effect on neighboring countries especially, Korea. The scale of the movement of goods, labor, and capital between the two countries will become much larger than present. Through regional trade agreements, economic interdependency between Korea and China will increase.

• The KSFM Journal of Fluid Machinery
• /
• v.16 no.5
• /
• pp.18-23
• /
• 2013

Thermal aging test is performed to qualify the life time of equipment in thermally aged condition. Due to long life time more than 10 years like as in power plant, the equipment is subjected to the accelerated thermal aging condition which is able to shorten the long aging test period by increasing aging temperature. Normally, conservatism of thermal aging test causes to impose unbalanced and excessive thermal load on components of the equipment, and deformation and damage problems of the components. Additionally, temperature rise of each component through heat generation of the electric equipment leads to long-term problem of the test period. Multi-phase accelerating aging test is to perform thermal aging test in multiple aging conditions after dividing into groups with various components of equipment. The groups might be classified considering various factors such as activation energy, temperature rise, glass transition temperature and melting temperature. In this study, we verify that the multi-phase accelerating aging test method can reduce and equalize the thermal over load of the components and shorten aging test time.

• Korean Journal of Materials Research
• /
• v.3 no.4
• /
• pp.388-394
• /
• 1993

The state of aggregation and optical contrast of poly(vinyl chlorich, )(PVC)!nematic liquid crystal(LC) composite film liave been studied for a wide range(30~70 wt% LC)of film composition. In addition. effects of temperature, frequency and voltage of the applied AV electric field on the film transmittance have heen measured for a film containing (6O wt % I, C, which showed maximum optical contrast. For this particular composition of film, tlw thn'shold voltage was smalkr than .40$V_{p-p}$ at I kHZ, $25^{\circ}C$, and the rise time and decay time were smalle, r than l0Oms at 100$V_{p-p}$, I kHz, and $25^{\circ}C$.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.2 no.4
• /
• pp.28-34
• /
• 2011

Because strong urban earthquakes must produce huge losses of both life and property, examinations about the effect of huge earthquakes for tall buildings are very required. The goal of this report is examining model safety and compare the behavior of 2-D tall models under huge seismic loads. This report examines high-rise models designed KBC2009 codes using 1) seismic loads regulated by KBC2009 and 2) amplified seismic loads assumed to strong earthquakes. And observing for more realistic behavior of tall buildings under huge earthquakes, this report takes two analysis methods - response spectrum analysis and non-linear time history analysis considering P-delta effect.

• Structural Engineering and Mechanics
• /
• v.83 no.4
• /
• pp.537-549
• /
• 2022

In this paper, a novel multi-feature model predictive control (MPC) framework with real-time and adaptive performances is proposed for intelligent structural control in which some drawbacks of the algorithm including, complex control rule and non-optimality, are alleviated. Hence, Linear Programming (LP) is utilized to simplify the resulted control rule. Afterward, the Whale Optimization Algorithm (WOA) is applied to the optimal and adaptive tuning of the LP weights independently at each time step. The stochastic control rule is also achieved using Kalman Filter (KF) to handle noisy measurements. The Extreme Learning Machine (ELM) is then adopted to develop a data-driven and real-time control algorithm. The efficiency of the developed algorithm is then demonstrated by numerical simulation of a twenty-story high-rise benchmark building subjected to earthquake excitations. The competency of the proposed method is proven from the aspects of optimality, stochasticity, and adaptivity compared to the KF-based MPC (KMPC) and constrained MPC (CMPC) algorithms in vibration suppression of building structures. The average value for performance indices in the near-field and far-field (El earthquakes demonstrates a reduction up to 38.3% and 32.5% compared with KMPC and CMPC, respectively.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.287-290
• /
• 1999

In the transmitter of optical fiber transmission systems, a time-division multiplexer combines several parallel data streams into a single data stream with a high bit rate. In this paper, we design a 2:1 (2-channels) time-division multiplexer using SiGe HBT with emitter size of 2$\times$8${\mu}{\textrm}{m}$$^2$. The operation speed is 10Gbps, the rise and fall times of 20-80% are 34ps and 35ps, respectively and the dissipation of power is 0.86W.