• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2010년도 추계학술대회
• /
• pp.771-772
• /
• 2010

환자의 진단에 유용하게 사용되고 있는 X선 장치는 X선을 인체에 조사할 때 나타나는 피폭이 큰 단점으로 지적되고 있으며 ICRP에서는 인체의 방사선 노출 허용량을 제한하고 있다. 이러한 피폭을 줄이기 위해 많은 연구 개발이 진행되고 있다. 본 연구에서는 X선의 발생 효율 증가 및 정밀한 출력 제어가 가능한 인버터 방식의 고전압 발생장치를 제작하였다. 또한 X선관에 인가되는 직류 고전압에 발생 가능한 리플을 최소화하기 위해 전파 정류방식을 적용하였으며, 이를 환자의 진단에 사용하기 위해 조사재현성 및 선질을 평가하였다.

• 한국산업융합학회 논문집
• /
• 제22권3호
• /
• pp.373-379
• /
• 2019

Nowadays, the IoT portable electronic devices have become more useful and diverse, so they require various supply voltage levels to operate. This paper presents a DC-DC buck converter with pulse width modulation (PWM) for portable electronic devices. The proposed step-down DC-DC converter consists of passive elements such as capacitors, inductors, and resistors and an integrated chip (IC) for signal control to reduce power consumption and improves ripple voltage with the resolution. The proposed DC-DC converter is simulated and analyzed in PSPICE circuit design platform, and implemented on the prototype PCB board with a Texas Instruments LM5165 IC. The proposed buck converter is showed 92.6% of peak efficiency including a load current range of 4-10 mA, 3.29 mV of the voltage ripple at 5 V output voltage for the supply voltage 12 V. Measured and Simulated power efficiency are made good agreement with each other.

• 한국산업융합학회 논문집
• /
• 제24권4_1호
• /
• pp.377-385
• /
• 2021

High voltage direct current(HVDC) systems has been an alternative method of a power transmission to replace high voltage alternate current(HVAC), which is a traditional AC transmission method. Due to technical limitations, Line commutate converter HVDC(LCC-HVDC) was mainly used. However, result from many structural problems of LCC-HVDC, the voltage source converter HVDC(VSC-HVDC) are studied and applied recently. In this paper, after analyzing the reactive power and output voltage ripple, which are the main problems of LCC-HVDC, the characteristics of each HVDC are summarized. Based on this result, a new LCC-HVDC structure is proposed by combining LCC-HVDC with the MMC structure, which is a representative VSC-HVDC topology. The proposed structure generates lower reactive power than the conventional method, and greatly reduces the 12th harmonic, a major component of output voltage ripple. In addition, it can be easily applied to the already installed LCC-HVDC. When the proposed method is applied, the control of the reactive power compensator becomes unnecessary, and there is an advantage that the cut-off frequency of the output DC filter can be designed smaller. The validity of the proposed LCC-HVDC is verified through simulation and experiments.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1990년도 추계학술대회 논문집 학회본부
• /
• pp.278-282
• /
• 1990

In this paper, two different plusewidth modulation(PWM) for inverter and voltage control technique are described. Inverter output harmonics are harmful in induction motor drive because it lead to ripple torque and induction interference. In order to reduce or minimize losses, various forms of PWM strategy such as PM(Positive Modulation) and NM(Negative Modulation) are discussed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.251-254
• /
• 2003

인버터-컨버터를 사용하여 발전기를 제어하는 풍력발전 시스템의 출력은 풍속에 따라서 변화하기 때문에, 풍속을 기준으로 발전기를 제어할 경우, 풍력발전 시스템이 계통에 공급하는 유효전력에는 여러 가지 성분은 풍속에 따라서 흔들리게 된다. 이러한 문제를 해결하기 위하여, 발전기와 계통연계 인버터를 유효전력을 기준으로 제어하도록 하였으며, 시뮬레이션을 통하여 검증하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.713-716
• /
• 2000

In this paper a simple theory is presented to represent characteristic of a SRM and theoretical results are compared with experimental ones. In the theory the inductance variation of a SRM are approximated as linear and winding resistance and the magnetic saturation are ignored. With these approximations we derived some equations expressing load characteristics of a SRM Also the torque ripple was removed by applying a variable hysteresis band control.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1999년도 전력전자학술대회 논문집
• /
• pp.151-154
• /
• 1999

This paper presents a driving method of 3-phase 4-poles SRM(switched reluctance motor) drived by switching angle control. In this study, the switching angle is determined from approximated analysis and computer simulation by using MATLAB for high efficiency according to the speed and torque required by load, and then microcontroller controls the switching angle of asymmetrical inverter in SRM driver. Also, we experiment the maximum forque driving and maximum power driving by controlling switching angle available to electric vehicle.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1999년도 전력전자학술대회 논문집
• /
• pp.358-361
• /
• 1999

In auxiliary block of high speed train power factor correction and harmonics reduction is very important issue for efficient energy transport. The GTO-equipped PWM converter is used for traction untill resently. But the rising power capability of IGBTs resently allows to build IGBT-equipped PWM converter with a considerably increased switching frequency. This paper presents switching pattern, control method, operation mode and tuned filter to reduce dc link voltage ripple for paralleled converter.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 B
• /
• pp.785-787
• /
• 1999

In this paper, recursive least square algorithm is presented to estimate the parameters of step motor under low-speed operation. Parameter estimation is important for compensating the input current by calculating the ratio of the motor torque constant and detent torque constant that causes torque-ripple in low-speed applications. On-line parameter estimation process is a preliminary procedure to apply step motor to adaptive control. Computer simulation shows that the estimated parameters converge in finite time.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 16-17 Oct. 1987
• /
• pp.690-693
• /
• 1987

Base-line wandering and 60Hz noise in ECG are removed by linear phase FIR filter. The important problem in FIR filtering is to reduce the number of impulse response coefficients. It can be reduced by symmetrical impulse response. The ripple is improved by window function .omega.(n). And the determination of filter accuracy is proposed by PRD(percent rms difference) algorithm.