• 한국광학회지
• /
• 제31권1호
• /
• pp.13-19
• /
• 2020

광섬유 사냑 간섭형 센서를 이용해 수중 음향을 측정하기 위하여 링형 탐촉자를 적용하는 경우 민감도를 이론과 실험을 통하여 조사한다. 링형 탐촉자는 단일 모드 광섬유를 지름 5 cm의 링형으로 감아서 접착제로 패키징하였다. 링형 탐촉자는 감지 광섬유의 길이를 46.84 m로 하여 제작한 A형 탐촉자와 감지 광섬유의 길이를 112.22 m로 한 B형 탐촉자를 준비하였다. 수중 음향 시험은 상용 음향 발생기와 1 m 떨어진 거리에서 링형 탐촉자를 사용하여 50, 70, 90 kHz의 주파수에 대하여 20~100 Pa의 음향 압력 범위에서 음향 민감도를 조사하는 실험을 수행하였다. 실험 결과, 링형 탐촉자는 주파수에 대하여 다른 민감도를 나타내었으며, 이론과 비교하기 위하여 평균값을 구하였다. 세 주파수에 대한 평균 민감도는 A 탐촉자와 B 탐촉자에 대하여 각각 25.48 × 10^-5, 60.79 × 10^-5 rad/Pa으로 측정되었으며, 이로부터 영률 보정 계수 c값을 0.35로 결정할 수 있었다.

• 전기전자학회논문지
• /
• 제11권4호
• /
• pp.293-296
• /
• 2007

루프 공진기 구조를 가지는 비침습식 혈당 센서 구조를 제작하여 혈당 측정을 위한 민감도 측정을 하였다. 0%와 20%의 글루코스 용액의 전기적 특성을 확인하고, 25mm${\sim}$170mm의 지름을 가지는 링 구조를 이용하여 식염수 중 글루코스 농도에 따른 반사 손실의 차이를 측정하였다. 링 형태 프로브가 혈액과 같은 인체 내부의 물질을 측정하는데 종단 개방 프로브에 비해 유리한 특성을 가지며, 측정 주파수 중 가장 낮은 285MHz에서 S11이 0.94의 차이를 보여, 저주파일수록 민감도가 향상됨을 알 수 있었다.

• 한국기계가공학회지
• /
• 제20권7호
• /
• pp.25-32
• /
• 2021

In the previous study, a study was conducted to improve the exhaust gas intake efficiency by improving the existing soot measurement probe in the shape and angle of the exhaust port. As a result, it can be seen that the smoke measurement performance according to the shape and angle is improved. In previous studies, the performance of the soot probe was not confirmed for the Korean KD 147 mode, which has a low suction flow rate and a long inspection time. So, we would like to confirm the improvement of the smoke probe performance of the Korean KD 147 mode, which is close to the actual driving conditions. The probe used in this study is another type of probe, and has a circular ring shape instead of a rib and variable center position unit, so the probe center hole is located close to the center of the exhaust pipe.

• Bulletin of the Korean Chemical Society
• /
• 제34권2호
• /
• pp.389-393
• /
• 2013

A rhodamine B-based fluorescent probe for nitrite ion ($NO{_2}^-$) has been designed, synthesized, characterized and its properties for recognition of $NO{_2}^-$ were studied. Nearly non fluorescent probe upon reaction with nitrite ion significantly triggered the fluorescence. Fluorescence response is based on ring opening of the spirolactam of rhodamine B phenyl hydrazide showing maximum absorbance at 552 nm and maximum emission at 584 nm. Probe 3 exhibited high sensitivity and extreme selectivity for nitrite ion over other common ions and oxidants ($Cl^-$, $ClO^-$, $ClO{_2}^-$, $ClO{_3}^-$, $ClO{_4}^-$, $SO{_4}^{2-}$, $SiO{_3}^{2-}$, $NO{_3}^{2-}$, $CO{_3}^{2-}$) examined in methanol water (1:1, v/v) at pH 7.0. The probe might be a new efficient tool for detection of nitrite ion in natural water and biological system.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1569-1573
• /
• 2004

Two ring-type conductance meters were manufactured to measure void fraction and its propagation speed in slug flow. The signal of conductance meter with two rings depends on liquid temperature. Therefore a conductance meter with separated probe designed by Coney (1973), which is independent of liquid temperature, was used and experimentally proved. The manufactured conductance meters showed a good repeatability and agreement with the analytical solution by Coney (1973). From time lag between two conductance meter, we could calculate the propagation speed of void fraction.

• Journal of Microbiology
• /
• 제40권1호
• /
• pp.38-42
• /
• 2002

The strain KKI isolated from soil contaminated with polycyclic aromatic hydrocarbons was identified as Pseundomonas sp. based on analyses by MIDI and Biolog Identification System. Cellular and physiological responses of strain KKI to two-ring polycyclic aromatic hydrocarbon, naphthalene were evaluated using radiorespirometry, PLFAs and sequence analysis of Rieske-type iron sulfur center of dioxygenase. KKI was found to be able to rapidly mineralize naphthalene. Notably, KKI cells pregrown on phenanthrene were able to mineralize naphthalene much more rapidly than naphthalenepregrown cells. The total cellular fatty acids of KKI were comprised of eleven C-even and two C-odd fatty acids (fatty acids < 0.2% in abundance were not considered in this calculation). Lipids 12:0 2OH, 12:03 OH, 16:0, 18:1 6c, 18:0 increased for naphthalene-exposed cells, while lipids 18:1 7c1/15:0 ism 2OH, 17:0 cyclo, 18:1 7c, 19:0 cyclo decreased. Data from Northern hybridization using a naphthalene dixoygenase gene fragment cloned out from KKI as a probe provided the information that naphthalene dioxygenase gene was more highly expressed in cells grown on phenanthrene than naphthalene.

• 한국지반공학회논문집
• /
• 제23권12호
• /
• pp.33-42
• /
• 2007

연약지반의 강성평가는 샘플링(sampling)과 현장 접근에 따른 교란으로 인해 정확하게 평가하는 것이 상당히 어렵다. 이를 위해 개발된 링 타입 FVP를 이용하여 부산 신항에서 실험이 수행 되었다. 이 논문의 목적은 지반 관입시 발생하는 교란을 최소화 할 수 있도록 기존의 링 타입 FVP를 블레이드 타입 FVP로 개량하는 것이다. 블레이드 타입 FVP는 하단의 웨지 모양, 시료 교란, 트랜스듀서, 케이블의 보호, 그리고 케이블과 트랜스듀서간의 전자기적 커플링을 고려하여 설계하였다. 케이블 간 누화현상은 케이블의 접지와 통합을 통해 제거 할 수 있었다. FVP의 전단파 속도는 초기 도달 시간과 이동거리를 이용하여 간단하게 계산될 수 있었다. FVP 블레이드의 관입에 의한 교란 효과 조사 및 FVP를 통해 측정된 전단파 속도의 타당성을 확인하기 위하여 실내 대형 calibration 챔버를 이용하여 비교 시험을 수행하였다. 블레이드 타입 FVP는 30m 깊이까지 측정이 되었으며, 전단파 속도는 매 심도 10cm마다 측정이 되었다. 본 논문에서 제시된 개량된 블레이드 타입의 FVP는 대상 지반의 교란을 최소화 시키며 현장에서 직접 전단파 속도를 측정 할 수 있는 효과적인 장비라고 할 수 있다.

• Archives of Pharmacal Research
• /
• 제20권4호
• /
• pp.324-329
• /
• 1997

AB-type amphiphilic copolymers (abbreviated as LE) composed of poly (L-leucine) (PLL) as the A component and poly (ethylene oxide) (PEO) as the B component were synthesized by the ring-opening polymerization of L-leucine N-carboxy-anhydride initiated by methoxy polyoxyethylene amine $(Me-PEO-NH_2)$ and characterized. Core-shell type nanoparticles were prepared by the diafiltration method. Particle size distribution obtained by dynamic light scattering was dependent on PLL composition and the size for LE-1, LE-2 and LE-3 was $369.6{\pm}267$, $523.4{\pm}410$ and $561.2{\pm}364 nm$, respectively. Shapes of the nanoparticies observed by transmission electron microscope (TEM) were almostly spherical. The critical micelle concentration (CMC) of the nanoparticles determined by a fluorescence probe technique was dependent on the composition of hydrophobic PLL, and the CMC for LE-1, LE-2 and LE-3 was $2.0{\times}10^{-6},1.7{\times}10^{-6}$ and $1.5{\times}10^{-6}(mol/l) $, respectively. Clonazepam release from core-shell type nanoparticles in vitro was dependent on PLL composition and drug loading content.

• 대한기계학회논문집B
• /
• 제24권5호
• /
• pp.623-631
• /
• 2000

Hot-wire measurements were carried out on the developing turbulent flows subject to plane rate of strain in a rotating curved duct. The cross-section of the curved duct varies from 100mm${\times}$50mm rectangular shape at the bend inlet gradually to the 50mm${\times}$100mm rectangular shape at the bend outlet. Experimental setup consists of the test section of $90^{\circ}$ curved duct, rotating disc of 1.95m diameter, Ag-Ni precision slip ring, automatic traversing mechanism, variable speed motor, centrifugal blower, orifice flowmeter and hot-wire anemometer. Data signals from the rotating curved duct are transmitted through the slip ring to the computer which is located at the outside of the rotating disc. 3-dimensional velocity and 6 Reynold stresses components were obtained from the fluctuating and mean voltage measured by the slant type hot-wire probe rotating into 6 orientations. We investigate the effects of Coriolis and centrifugal forces on the turbulence structure.

• Bulletin of the Korean Chemical Society
• /
• 제22권5호
• /
• pp.467-475
• /
• 2001

A triblock copolymer based on $poly(\varepsilon-caprolactone)$ (PCL) as the hydrophobic part and poly(ethylene glycol) (PEG) as the hydrophilic portion was synthesized by a ring-opening mechanism of ${\varepsilon}-caprolactone$ with PEG containing a hydroxyl group at bot h ends as an initiator. The synthesized block copolymers of PCL/PEG/PCL (CEC) were confirmed and characterized using various analysis equipment such as 1H NMR, DSC, FT-IR, and WAXD. Core-shell type nanoparticles of CEC triblock copolymers were prepared using a dialysis technique to estimate their potential as a colloidal drug carrier using a hydrophobic drug. From the results of particle size analysis and transmission electron microscopy, the particle size of CEC core-shell type nanoparticles was determined to be about 20-60 nm with a spherical shape. Since CEC block copolymer nanoparticles have a core-shell type micellar structure and small particle size similar to polymeric micelles, CEC block copolymer can self-associate at certain concentrations and the critical association concentration (CAC) was able to be determined by fluorescence probe techniques. The CAC values of the CEC block copolymers were dependent on the PCL block length. In addition, drug loading contents were dependent on the PCL block length: the larger the PCL block length, the higher the drug loading content. Drug release from CEC core-shell type nanoparticles showed an initial burst release for the first 12 hrs followed by pseudo-zero order release kinetics for 2 or 3 days. CEC-2 block copolymer core-shell type nanoparticles were degraded very slowly, suggesting that the drug release kinetics were governed by a diffusion mechanism rather than a degradation mechanism irrelevant to the CEC block copolymer composition.