• 한국의상디자인학회지
• /
• 제7권3호
• /
• pp.75-81
• /
• 2005

The experiment aimed at knowing the effect of physiology and psychology according to season on color preference. Two tests, one of the spring and the other of the autumn was conducted. Seventy subjects with normal color vision served as subjects. The subjects entered a bioclimatic chamber controlled at a temperature of $25\pm1^{\circ}C$, a relative humidity of $50\pm5\%$ and a light of 1000 1x. The subjects wearing white shirts and trousers sat quietly on a sofa for one our. Sensation from warm to cool colors might be possibly different individually Therefore, a subject asked to array 41 randomly placed cloth colors from very warm to very cool colors during rest quietly for one our. All subjects arrayed these cloth colors in the order from red through yellow and green to blue, which had the reproducibility. After rest, they were instructed to choose a single one out of 41 cloth colors, preferred by themselves, every 10min during one our 0-ring test were measured to red, yellow, white, blue, black, favorite color, and dislike color. Most subjects preferred warmer color in April than in December. Tympanic temperature was significantly lower in December than in April. Finger presser was significantly higher in like color than in dislike color but it was no significant differences between spring and autumn. The preferring the warm color in April toward summer when basal metabolic rate is decreased than in December toward winter when it is increased can explain that physiology reaction by load error between actual core temperature and set-point induces psychological reaction to pursue visual alliesthesia. Our present experiment revealed that the preferred color could be determined by the relationship between the internal temperature and its set point according to season. It should be emphasized that the alliesthesia was observed also in the realm of visual system.

• Journal of Microbiology and Biotechnology
• /
• 제31권5호
• /
• pp.686-695
• /
• 2021

Tricholoma matsutake is an ectomycorrhizal fungus that has a symbiotic relationship with the root of Pinus densiflora. Soil microbial communities greatly affect the growth of T. matsutake, however, few studies have examined the characteristics of these communities. In the present study, we analyzed soil fungal communities from Gyeongju and Yeongdeok using metagenomic pyrosequencing to investigate differences in fungal species diversity, richness, and taxonomic composition between the soil under T. matsutake fruiting bodies (Sample 2) and soil where the fairy ring of T. matsutake was no longer present (Sample 1). The same spot was investigated three times at intervals of four months to observe changes in the community. In the samples from Yeongdeok, the number of valid reads was lower than that at Gyeongju. The operational taxonomic units of most Sample 2 groups were less than those of Sample 1 groups, indicating that fungal diversity was low in the T. matsutake-dominant soil. The soil under the T. matsutake fruiting bodies was dominated by more than 51% T. matsutake. From fall to the following spring, the ratio of T. matsutake decreased. Basidiomycota was the dominant phylum in most samples. G-F1-2, G-F2-2, and Y-F1-2 had the genera Tricholoma, Umbelopsis, Oidiodendron, Sagenomella, Cladophialophora, and Phialocephala in common. G-F1-1, G-F2-1, and Y-F1-1 had 10 genera including Umbelopsis and Sagenomella in common. From fall to the following spring, the amount of phyla Basidiomycota and Mucoromycota gradually decreased but that of phylum Ascomycota increased. We suggest that the genus Umbelopsis is positively related to T. matsutake.

• The Korean Journal of Ecology
• /
• 제23권1호
• /
• pp.25-32
• /
• 2000

소나무 직경생장과 기후인자(월 평균기온과 총강수량)와의 관계를 지형적 특성에 따라 분석하기 위하여 월악산국립공원에서 선정한 20개의 임분에서 각각 10여 본의 임목에 대한 연륜을 측정하였다. 각 연륜계열들은 크로스데이팅 한 후, 임령과 임분동태에 따른 임목생장 추세를 제거하기 위하여 표준화함으로써 임분별 연륜연대기를 작성하였다. 연륜의 생장경향을 이용한 집락분석의 결과 20개 임분을 4개의 집락으로 분류할 수 있었다. 집락 Ⅰ 의 사면 방향은 북쪽이었으나, 다른 집락들은 대부분 남족과 남서쪽이었다. 고도는 집락Ⅰ(1개 임분), 집락Ⅱ(10개 임분), 집락Ⅲ(2개 임분)이 305∼580 m이었으나, 집락Ⅳ(7개 임분)는 다른 집락들보다 높은 450～870 m이었다 이중 집락Ⅱ는 다른 집락보다 토심이 얕은 급경사의 암석지에 위치하였다. 지형에 따른 기후인자들과 연륜생장과의 관계를 분석하기 위해 반응함수를 집락별로 실시하였다. 집락Ⅰ은 북사면의 다소 중습한 지역에 위치하여 다른 집락보다 기후인자의 영향을 많이 받지 않았다. 집락 Ⅱ는 강수가 임목생장을 제한하는 주요인으로 나타났는데, 이는 집락 Ⅱ가 낮은 고도에 위치하면서 토심이 얕은 급경사의 암석지에 위치하여 수분에 대한 임목생장의 민감도가 증가한 것이라 생각된다. 집락Ⅲ과 집락Ⅳ는 집락Ⅱ에 비하여 임목생장 개시 이전의 겨울과 이른봄의 기온이 보다 중요한 인자로 나타났다. 이런 결과는 고도 상승에 따른 기온 감소(집락Ⅳ)나 계곡부의 미소지형적 특성에 따른 온도 저하(집락Ⅲ)로 발생되는 결과라 생각된다. 이상의 결과는 GIS를 이용하여 수치화 하여 연륜과 지형이 갖는 시-공간적 정보들을 동시에 분석한 결과이다.

• 한국어류학회지
• /
• 제36권2호
• /
• pp.156-163
• /
• 2024

본 연구는 동해 울진 연안 10개 정점에서 계절별(2022년 4월, 7월, 10월, 2023년 2월)로 Ring net를 이용하여 채집한 자치어 종조성의 계절변동을 조사하였다. 총 27개 분류군에 속하는 자치어가 채집되었다. 어류 자치어 우점종은 참가자미(Pseudopleuronectes herzensteini), 볼락(Sebastes inermis), 까나리(Ammodytes japonicus), 문치가자미(Pseudopleuronectes yokohamae), 그물코쥐치 (Rudarius ercodes), 청베도라치(Parablennius yatabei)였고 상기 6종은 전체 자치어 현존량의 86.6%를 차지하였다. 자치어 출현종수, 현존량, 다양도지수는 계절에 따라 변하였는데, 출현종수와 현존량은 4월(춘계)에 가장 높았고, 다양도지수는 7월(하계)에 가장 높았다. 조사해역에서 자치어 군집의 계절별 출현양상에 따라 춘계, 하계, 동계 그룹을 구분할 수 있었다. 우점종 중 참가자미는 춘계에 우점하였고, 청베도라치와 그물코쥐치는 하계에 우점하였다. 그리고 볼락, 까나리, 문치가자미는 동계에 현존량이 높았다. 이러한 자치어 군집의 시간적 변동은 계절에 따른 수온 차이에 영향을 받았던 것으로 판단된다. 본 연구 결과는 동해에서 어류 자치어 다양성을 밝히고 연안해역의 산란장 기능을 평가하는 데 기여할 것으로 생각된다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2005년도 추계 학술대회논문집
• /
• pp.223-227
• /
• 2005

A PCV valve is a part to control the flow rate of Blowby gas in a PCV system. A PCV system re-burns Blowby gas with fuel in a combustion chamber. Some gas enters to a crankcase room through the gap between piston ring and engine cylinder wall. This gas si called 'Blowby gas'. This gas causes many problems. In environmental view, Blowby gas includes about $25\~35\%$ hydrocarbon{HC) of total generated HC in an automobile. Hydrocarbon is a very harmful pollutant element in our life. In mechanical view, Blowby gas has some reaction with lubricant oil of crankcase room. Then, this causes lubricant oil contamination, crankcase corrosion and a decrease fo engine efficiency. Consequently, Blowby gas must be eliminated from a crankcase room. In this study, we simulated internal flow characteristics in a PCV valve according to spool dynamic behavior using local remeshing method And, we programmed our sub routine to simulate a spool dynamic motion. As results, spool dynamic behavior is periodically oscillated by the relationship between fluid force and elastic force of spring. And its magnitude is linearly increased by the differential pressure between inlet and outlet. Also, as spool is largely moved, flow area is suddenly decreased at orifice. For this reason, flow velocity is rapidly decreased by viscous effect.

• 한국터널지하공간학회 논문집
• /
• 제17권3호
• /
• pp.363-382
• /
• 2015

본 연구는 수치해석을 통하여 TBM 세그먼트의 분할 수와 인접한 링의 이격각도가 라이닝의 부재력에 어떤 영향을 미치는 살펴보았다. 수치해석은 Midas civil 2012+ 프로그램을 사용하였고, 모델링은 2링빔 스프링 모델을 이용하였다. TBM 세그먼드 부재력은 다양한 요소에 의해 결정된다. 본 논문에서는 세그먼트 분할 수와 분포를 제외한 다른 요소인 이음부 스프링 계수, 지반반력계수를 통제하고 특정한 분할 수와 분할 특성을 통해 case를 선정함으로써 분할 수와 분포와 같은 분할 특성이 부재력에 미치는 영향을 분석하였다. 이로써 TBM 세그먼트 시공 설계시 구조적으로 유리하거나 불리한 이음부 특성을 확인할 수 있다.

• 항공우주시스템공학회지
• /
• 제6권1호
• /
• pp.26-32
• /
• 2012

A shock absorber with magnetic effects is suggested for a lunar space-ship expected to launch in 2025. The device consists of a copper steel combined tube, two magnets, and a piston. The piston is designed to move a magnet through the tube when it is pushed by an external impact. While the magnet is moving in the tube, it generates the eddy current force with the copper part of the tube and it also makes the large friction force with the steel part of the tube. Beside, it gets resistive forces against its movement such as the magnetic force with a steel-ring at the first time of the movement and the repulsive force with a same pole opposed magnet at the end time of the movement. In this thesis, results of analyses and experiments of each force are represented and the expected performance of the electromagnetic shock absorber is drawn from the results.

• 대한기계학회논문집A
• /
• 제33권11호
• /
• pp.1217-1224
• /
• 2009

This paper presents a finite element (FE) analysis of the torsional rigidity of a two-stage cycloid drive. The cycloid disk makes contact with a number of pin-rollers simultaneously and eccentric shafts transmit not only torque of the spur gear stage to the cycloid disk, but also that of the cycloid disk to the output disk. Contacts between the disk and pin-rollers are simplified as linear spring elements, and the bearing of eccentric shaft is modeled as a rigid ring that has frictional contact to the disk and an elastic support. FE analysis for an ideal solid cycloid drive was performed and verified by a theoretical calculation. Accurate contact forces were then estimated by iterating between FE analysis for contact forces and Hertz theory calculations for nonlinear contact stiffness. In addition, torsional rigidity of the cycloid drive is analyzed to show that the bearing and nonlinear Hertz contact theory should be considered in analysis and design of a cycloid drive, which was verified with experiments. Finally, the effects of contact stiffness, bearing stiffness and cycloid disk structural stiffness according to the cycloid disk rotation on the torsional rigidity were investigated.

• Structural Engineering and Mechanics
• /
• 제61권5호
• /
• pp.593-603
• /
• 2017

A high-efficiency simplified modelling approach is proposed for investigating the nonlinear responses of reinforced concrete linings of shield tunnels. Material and geometric nonlinearities are considered in the analysis of the lining structures undergoing large deformation before ultimately losing the load-carrying capacity. A beam-spring element model is developed to capture the force-transfer mechanism between lining segments and radial joints. The developed model is validated by comparing analyzed results to experimental results of a single-ring lining structure under two loading conditions: the ground overloading and the lateral unloading respectively. The results show that the lining structure under the lateral unloading due to excavation on the both sides of the tunnel is more vulnerable compared to the case of ground overloading on the top of the tunnel. A parameter study is conducted and results indicate that the lateral pressure coefficient has the greatest influence on the behaviour of the lining structure.

• Asian Journal of Atmospheric Environment
• /
• 제5권1호
• /
• pp.56-63
• /
• 2011

Quantifying the solute composition of a cloud droplet (or a whole droplet) is an important task for understanding formation processes and heating/cooling rates. In this study, a combination of droplet fixation and SR-XRF microprobe analysis was used to visualize and quantify elements in a micro-scale droplet. In this study, we report the preliminary outcome of this experiment. A spherical micro-scale droplet was successfully solidified through exposure to ${\alpha}$-cyano-acrylate vapor without affecting its size or shape. An X-ray microprobe system equipped at the beam line 37XU of Super Photon ring 8 GeV (SPring-8) was applied to visualize and quantify the elemental composition in an individual micro-scale droplet. It was possible to reconstruct 2D elemental maps for the K and Cl contained in a microdroplet that was dispensed from the 10-ppm KCl standard solution. Multi-elemental peaks corresponding to X-ray energy were also successfully resolved. Further experiments to determine quantitative measures of elemental mass in individual droplets and high-resolution X-ray microtomography (i.e., 3D elemental distribution) are planned for the future.