• 건축역사연구
• /
• 제15권2호
• /
• pp.23-38
• /
• 2006

During the repair and restoration of the Daewoongjeon Hall of Youngguksa Temple, species identification and tree-ring dating for both present wood elements and charred ones excavated under the Hall, were conducted. The species of 74 wood elements of Daewoongjeon Hall, were identified as Pinus densiflora Sieb. et Zucc. and only 1 was identified as exotic Pinus species. The latter wood, which was used in the laths, seems to have been replaced during past repairs. Many documentary records and various artifacts pertaining to Youngguksa Temple are being excavated, but none described precisely the construction date of the present Daewoongjeon Hall. Also, from beneath the Daewoongjeon Hall, cornerstone and foundation of previous building and several charred wood elements were excavated. In comparing the direction of the stone columns of foundation of the previous structure and the existing Daewoongjeon Hall, the previous structure was rotated in an angle of approximately $15^{\circ}$. Therefore, in order to find the association of the previous structure with the present Daewoongjeon Hall, tree-ring dating was conducted. The dating of 41 original timbers and 14 roof-filling timbers of the present construction elements revealed that the last annual ring was of A. D. 1703 with complete latewood, indicating that those woods was cut some time between the autumn of 1703 and spring of 1704, and the building was erected in 1704 when we assume no period of wood storage. The year of the last annual ring of the charred elements, which were excavated from beneath the Daewoongjeon Hall, was analyzed as 1674. The cutting year of the woods used for the present building began in 1698, therefore, it can be presumed that the Daewoongjeon Hall before the fire was a structure that was elected shortly after 1674 and that a catastrophic fire occurred some time between 1674 and 1698.

• 헤리티지:역사와 과학
• /
• 제52권3호
• /
• pp.160-171
• /
• 2019

나주 정촌고분 1호 석실 출토 소환두도는 내부 별도 장식이 없는 오각형 환두도이다. 또한 모도와 자도 2자루로 구성된 모자대도이다. 정촌고분 소환두도는 환두부, 병부, 신부, 초미금구로 구성되었다. 소환두도 환두는 철지은장(鐵地銀裝)이지만 은(銀)이 염화은으로 부식되면서 연보라색을 띠며 내부 철제 심의 부식물이 표면에 형성되었다. 염화은은 염화이온이 용해된 매장 환경에서 은이 수분과 반응하여 생성되는데, 가루 형태로 부식되어 유물의 형태 보존을 어렵게 한다. 정촌고분에서 함께 출토된 다른 은제 유물도 유사한 부식 형태를 보여주고 있다. 정촌고분 소환두도의 X선 투과조사 및 CT 분석 결과, 철제 외환에 T자형 슴베를 만들고 신부의 슴베와 연결하였다. 소환두도의 자도를 참고하여 모도의 형태를 유추하면, 모도는 환두, 병두금구, 병연금구를 은판(銀板)으로 감싸고 금제 환과 은제 선으로 병부를 장식하였다. 환두 슴베와 신부 슴베의 연결 방식은 리벳 구멍이 확인되지 않아 단접(鍛接)한 것으로 판단되었다. 초미금구는 철판으로 형태를 만들고 끝단을 견직물로 감싸고 그 아래를 은판과 금제 환으로 장식하였다. 정촌고분 소환두도는 금 은 철제 금속을 다양하게 사용하였으며 백제, 신라, 가야의 여러 가지 요소가 복합적으로 구성되어 주변 유적 및 여러 문화권 영향을 받았음을 확인할 수 있었다.

• Journal of Electrical Engineering and Technology
• /
• 제8권2호
• /
• pp.376-384
• /
• 2013

With the continuous aging of the populations in developed countries, the medical requirements of the aged are expected to increase. In this paper, a ring-type pulse oximeter finger sensor and a 24-hour ambulatory heart rate monitoring system for the aged are presented. We also demonstrate the feasibility of extracting accurate heart rate variability measurements from photoelectric plethysmography signals gathered using a ring-type pulse oximeter sensor attached to the finger. We designed the heart rate sensor using a CPU with built-in ZigBee stack for simplicity and low power consumption. We also analyzed the various distorted signals caused by motion artifacts using a FFT, and designed an algorithm using a least squares estimator to calibrate the signals for better accuracy.

• 한국재료학회지
• /
• 제24권2호
• /
• pp.87-92
• /
• 2014

The Notched Ring Test(NRT) has proven to be very useful in determining the slow crack growth behavior of polyethylene pressure pipes. In particular, the test is simple and an order of magnitude shorter in experimental times as compared to the currently used Notched Pipe Test(NPT), which makes this method attractive for use as the accelerated slow crack growth test. In addition, since the NRT specimen is taken directly from the pipe, having maintained the cross-section, processing induced artifacts that would affect the slow crack growth behavior are not altered. This makes the direct comparison to the slow crack growth specimen in pipe from more meaningful. In this study, for comparison with other available slow crack growth methods, including the NPT, the stress intensity factor equation for NRT specimen was developed and demonstrated of its accuracy within 3% of that obtained from the finite element analysis. The equation was derived using a flexure formula of curved beam bending along with numerically determined geometric factors. The accuracy of the equation was successfully tested on 63, 110, 140, 160, 250, and 400 mm nominal pipe diameters, with crack depth ranging from 15 % to 45 % of the pipe wall thickness, and for standard dimensional ratio(SDR) of 9, 11, and 13.6. Using this equation the slow crack results from 110SDR11 NRT specimen were compared to that from the NPT specimen, which demonstrated that the NRT specimen was equivalent to the NPT specimen in creating the slow crack, however in much shorter experimental times.

• 보존과학연구
• /
• 통권26호
• /
• pp.127-139
• /
• 2005

We have conserved the sword with round pommel with a tri-ring which was excavated from No. 1 tomb of the Duckcheon-ri at the Gyeongju and requested from Jungang Research Center of the Cultural Heritage. When this artifact excavated, it was pressed flat state because of the influence of earth pressure and stuck to a gravel and soil laid scattered on the wooden coffin. If the artifacts is handled without plan, it can be damaged, therefore that sword was collected together with soil using the Polyurethane foam. After the artifact which had a weak specific and was collected using a this method can be safetly collected as below; First, we made the supporter of article ordered using a silicon and gypsum. The silicon can conserve the weak point of the artifact because it has a flexible and smooth properties and the gypsum can adhere closely to the artifact because it has a little expansion and shrinking but a hard and fluid characters. Consequently, gypsum is a good complement to the weak point of the silicon. Second, During a remove gauze and a reinforcing agent from the surface of a artifact which was reinforced using a acetone steam method. The acetone steam method can be supplement to a dangerous problem of acetonedircet method because this can be damaged in a surface of the artifact.

• 보존과학연구
• /
• 통권31호
• /
• pp.173-202
• /
• 2010

Within the framework of the Mongolian-Korean Joint Project for "Research and Preservation of Cultural Heritage", I enrolled in 3 months training course from February to May 2010 at the Metal laboratory of Conservation Science Division in National Research Institute of Cultural Heritage, Korea. Some metal artifacts, which are preserved in Institute of Archaeology, Mongolian Academy of Sciences, were brought and restored there. These chosen findings were found at Gobi and mountainous region of Mongolia, preserved under the different circumstances and dated back to Middle Age from Bronze Age. At the Metal laboratory of the NRICH, the conservation work was carried out for three months on 15 metal objects, including arrowhead, stirrup, caltrop, axe, knife, ring and so on, which were found at Khugshin Teel's ruin of Khairkhandulaan soum of Uvurkhangai province, Ungut of Altanbulag soum of Tuv province, Baruun Naran and Ukhaa khudag of Khankhongor and Tsogttsetsii soums of Umnugobi province. The report of the result of this conservation work is available here.

• 보존과학회지
• /
• 제28권1호
• /
• pp.1-5
• /
• 2012

연륜연대로 부여된 강화 정수사 법당 목부재(풍판)의 연대를 위글매치를 이용한 방사성탄소연대 측정결과와 비교하였다. 41년(AD 1250-1290) 연륜구간에서 1250년부터 5년 간격으로 9개 연륜에 대한 방사성탄소연대를 측정하였다. 개별 연륜에 대한 방사성탄소연대의 95.4% 신뢰구간은 113.3년(평균)에 달하였는데, 위글매치 후에는 20년으로 줄어들었다. 각 연륜의 방사성탄소연대 신뢰구간이 연륜연대값을 포함하여 연대의 정확성이 입증되었다. 이 결과는 위글매치를 이용한 방사성탄소연대 측정법이 우리나라 목재문화재의 연대측정에 효율적으로 쓰일 수 있음을 제시하고 있다.

• Journal of the Korean Wood Science and Technology
• /
• 제46권3호
• /
• pp.241-252
• /
• 2018

경산 임당 유적은 발굴된 층위와 출토된 유물을 근거로 2-4세기에 조성된 것으로 추정되었다. 본 연구는 유적지에서 출토된 목주 6점에 대해 추정된 연대를 확인하기 위하여 연륜연대분석을 실시하였다. 연륜연대분석 결과, 6점의 목주는 서로 일치하지 않아 각각 다른 시기에 벌채된 것으로 확인되었다. 6점의 목주 중 2점에 대해 위글매치법(wiggle matching)으로 방사성탄소연대를 측정한 결과에서도 각각 A.D. 94-135년과 A.D. 224-289년으로 재확인되었으며, 이는 전술의 추정연대와 일치하였다. 또한 목제유물의 수종 결과, 비교적 서늘한 환경에서 생장하는 수종(헛개나무, 피나무, 느릅나무 등)이 있음이 확인되었다. 이를 토대로 당시의 기후가 현재보다 서늘했다고 판단하였다.

• 대한의용생체공학회:의공학회지
• /
• 제33권4호
• /
• pp.169-176
• /
• 2012

Tumor cell morphology is closely related to its migratory behaviors. An active tumor cell has a highly irregular shape, whereas a spherical cell is inactive. Thus, quantitative analysis of cell features is crucial to determine tumor malignancy or to test the efficacy of anticancer treatment. We use 3D time-lapse phase-contrast microscopy to analyze single cell morphology because it enables to observe long-term activity of living cells without photobleaching and phototoxicity, which is common in other fluorescence-labeled microscopy. Despite this advantage, there are image-level drawbacks to phase-contrast microscopy, such as local light effect and contrast interference ring. Therefore, we first corrected for non-uniform illumination artifacts and then we use intensity distribution information to detect cell boundary. In phase contrast microscopy image, cell is normally appeared as dark region surrounded by bright halo ring. Due to halo artifact is minimal around the cell body and has non-symmetric diffusion pattern, we calculate cross sectional plane which intersects center of each cell and orthogonal to first principal axis. Then, we extract dark cell region by analyzing intensity profile curve considering local bright peak as halo area. Finally, we calculated the Fourier descriptor that morphological characteristics of cell to classify tumor cells into active and inactive groups. We validated classification accuracy by comparing our findings with manually obtained results.

• Imaging Science in Dentistry
• /
• 제50권2호
• /
• pp.153-159
• /
• 2020

Purpose: This study was conducted evaluate the influence of reconstruction parameters of micro-computed tomography (micro-CT) images on bone mineral density (BMD) analyses. Materials and Methods: The sample consisted of micro-CT images of the maxillae of 5 Wistar rats, acquired using a SkyScan 1174 unit (Bruker, Kontich, Belgium). Each acquisition was reconstructed following the manufacturer's recommendations(standard protocol; SP) for the application of artifact correction tools(beam hardening correction [BHC], 45%; smoothing filter, degree 2; and ring artifact correction [RAC], level 5). Additionally, images were reconstructed with 36 protocols combining different settings of artifact correction tools (P0 to P35). BMD analysis was performed for each reconstructed image. The BMD values obtained for each protocol were compared to those obtained using the SP through repeated-measures analysis of variance with the Dunnett post hoc test(α=0.05). Results: The BMD values obtained from all protocols that used a BHC of 45% did not significantly differ from those obtained using the SP (P>0.05). The other protocols all yielded significantly different BMD values from the SP(P<0.05). The smoothing and RAC tools did not affect BMD values. Conclusion: BMD values measured on micro-CT images were influenced by the BHC level. Higher levels of BHC induced higher values of BMD.