• 자동차안전학회지
• /
• 제14권4호
• /
• pp.21-26
• /
• 2022

Commercial use of autonomous vehicles is to come soon. So far most of responsibility of the accident is on the human driver with conventional vehicles whereas that will be on the car OEM and transportation related organizations with autonomous vehicles, which asks car OEM's and government to do vast study of car crash in various conditions. Test protocols need amendment and to be newly enacted to reflect new findings from the study aforementioned. Rigid stationary barrier and moving or stationary deformable barrier as well as car to car test which is same as actual accident can be utilized to simulate the crash happening on the road. Among those 3 test methods, rigid stationary barrier is most economic and has good repeatability. Limitation as well as advantage of the rigid stationary barrier is studied through comparison between car to car crash and oblique rigid barrier crash.

• 한국지반공학회논문집
• /
• 제38권11호
• /
• pp.7-17
• /
• 2022

본 연구에서는 중력식 사방댐 후면에 설치된 원통형 강성기둥 구조물의 배치변화가 토석류의 흐름거동 및 충격하중 변화에 미치는 영향을 확인하기 위해, 대책구조물들을 소형수로에 모사한 다음 원통형 구조물의 종방향 배열 수와유로 차단비율을 변화시켜가면서 실내모형실험을 수행하였다. 실험과정에서 대책구조물의 주변 흐름거동을 촬영하고, 중력식 사방댐의 작용하는 토석류의 충격하중을 측정하기 위해, 수로 측면과 상부에는 고속카메라를 설치하였고, 사방댐의 전면에는 로드셀을 설치하였다. 게다가, 글라스 비즈를 이용하여 토석류에 의해 동반되는 큰 직경의 거석들을 수로에 모사하였다. 실험결과, 중력식 사방댐 후면에 원통형 강성기둥 구조물의 설치는 토석류의 충격하중을 크게 감소시키는 것으로 나타났다. 또한, 대책구조물의 유로 차단비율을 증가시키면 거석을 동반한 토석류의 흐름억제를 증가시켜 충격하중을 더욱 감소시키는 것으로 나타났다.

• 한국정밀공학회지
• /
• 제17권4호
• /
• pp.226-232
• /
• 2000

This paper develops a finite element model for studying the crashworthiness analysis of a mid-size truck. A simulation for a truck frontal crash to a rigid barrier using the model is performed with PAM-CRASH installed in super computer SP2. Full vehicle model is composed of 86467 shell elements, 165 beam elements and 98 bar elements, and 86769 nodes. The model uses four material model such as elastic, elastic-plastic(steel), rigid and elastic-plastic(rubber) material model which are in PAM-CRASH. Frame and suspension system are modeled with 28774 shell elements and 31412 nodes. Cab is modeled with 34680 shell elements and 57 beam elements, and 36254 nodes. Bumper is modeled with 2262 shell elements, and 2508 nodes. Axle, steering shaft, etc are modeled using beam or bar elements. Mounting parts are modeled using rigid bodies. Bodies are interconnected using nodal constrains or joint options. To verify the developed model, frontal crash test with 30mph velocity to a rigid barrier is carried out. In the crash test, vehicle pulse at lower part of b-pillar is measured, and deformed shapes of frame and driver seat area are photographed. Those measured vehicle pulse and photographed pictures are compared those from the simulation to verify the developed finite element model.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2010년도 춘계학술발표대회 초록집
• /
• pp.28-28
• /
• 2010

The secondary barrier of cargo containment for membrane LNG tank is composed of composite materials such as rigid triplex (rigid secondary barrier, RSB) and flexible triplex (flexible secondary barrier, FSB). RSB and FSB are adhered to each other using an epoxy adherent and the quality of the secondary barrier depends on the bonding strength between them. The bonding strength between RSB and FSB is greatly influenced by the surface condition of RSB prior to joining. In this study, the effect of surface condition prior to joining on the joint strength and the fracture mode occurred between RSB and FSB have been examined in order to establish a proper surface treatment method for improving the bonding strength at the temperature of $-170^{\circ}C$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1699-1702
• /
• 2007

We will discuss encapsulation of OLEDs on both flexible and rigid glass substrates. Accelerated testing at 6CC/90RH and 85C/85RH is compared and acceleration factors for OLED and Calcium test samples are discussed.We have tested the stability and performance of our barrier coating to much higher temperatures: up to 140 C. Water Vapor Transmission rates at temperatures from 60 to 140 C are presented. Rates and methods for low cost manufacturing on a large scale are analysed

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1634-1637
• /
• 2008

We will discuss encapsulation of OLEDs on both flexible and rigid glass substrates. Accelerated testing at 6CC/90RH and 85C/85RH is compared and acceleration factors for OLED and Calcium test samples are discussed.We have tested the stability and performance of our barrier coating to much higher temperatures: up to 140 C. Water Vapor Transmission rates at temperatures from 60 to 140 C are presented. Rates and methods for low cost manufacturing on a large scale are analysed.

• Bulletin of the Korean Chemical Society
• /
• 제13권1호
• /
• pp.65-70
• /
• 1992

The hindered internal rotation effect of methyl group on chemical reaction was studied for cis-trans isomerization reaction of 1-bromopropene system using RRKM technique. A comparative study of the isomerization rates was also performed between the rigid and allowed internal rotations. The calculated rate of rigid cis-trans isomerization of 1-bromopropene was shown to be three times higher than its other halogenated propene homologues with its internal rotations and found to be in good agreement with experimental observations. These findings could be explained reasonably well in terms of the differences of the rotational barrier heights among halogenated propenes and correlated with the relatively low internal rotation barrier of cis-1-bromopropene, 230 cal/mol, compared to those of other cis-1-halopropenes, 700-800 cal/mol, and trans-1-halopropenes, 2.0-2.4 kcal/mol.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제49권5호
• /
• pp.297-303
• /
• 2023

A resorbable barrier membrane is commonly used for the repair of perforated sinus membranes during sinus lifting surgeries. However, repairing largescale perforations poses challenges for clinicians as the protection and isolation of graft material remain uncertain. With this technique, we aimed to prevent graft material loss and subsequent sinus-related complications using intra-sinus rigid fixation of the resorbable barrier membrane in cases with a large perforation of the sinus membrane.

• Computers and Concrete
• /
• 제6권1호
• /
• pp.79-93
• /
• 2009

In the present paper, a methodology has been presented for the reliability assessment of concrete barriers that lie at a certain depth in the soil, and a missile (a rigid projectile) impacts the top of the soil cover normally, and subsequently after penetrating the soil cover completely it hits the barrier with certain striking velocity. For this purpose, using expressions available in the literature, striking velocity of missile at any depth of soil has been derived and then expressions for the depths of penetration in crater and tunnel region of concrete barrier have been deduced. These depths of penetration have been employed for the derivation of limit state functions. Using the derived limit state functions reliability assessment of underground concrete barrier has then been carried out through First Order Reliability Method (FORM). To study the influence of various random variables on barrier reliability, sensitivity analysis has also been carried out. In addition, a number of parametric studies is conducted to obtain the results of practical interest.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 춘계학술대회 논문집
• /
• pp.630-631
• /
• 2014