• Smart Structures and Systems
• /
• v.22 no.4
• /
• pp.469-479
• /
• 2018

The present research study utilizes a multi-objective optimization method for Pareto optimization of an eight-degree of freedom full vehicle vibration model, adopting a non-dominated sorting genetic algorithm II (NSGA-II). In this research, a full set of ride comfort as well as ride safety parameters are considered as objective functions. These objective functions are divided in to two groups (ride comfort group and ride safety group) where the ones in one group are in conflict with those in the other. Also, in this research, a special optimizing technique and combinational method consisting of weighted sum method and Pareto optimization are applied to transform Pareto double-objective optimization to Pareto full-objective optimization which can simultaneously minimize all objectives. Using this technique, the full set of ride parameters of three dimensional vehicle model are minimizing simultaneously. In derived Pareto front, unique trade-off design points can selected which are non-dominated solutions of optimizing the weighted sum comfort parameters versus weighted sum safety parameters. The comparison of the obtained results with those reported in the literature, demonstrates the distinction and comprehensiveness of the results arrived in the present study.

• Journal of the Korean Society for Railway
• /
• v.13 no.6
• /
• pp.552-558
• /
• 2010

Ride comfort of railway vehicles is affected by many factors, such as vibration, noise, smell, temperature, visual stimuli, humidity and a seat design. In general, vibration, which originates from vehicle motion, is considered as the primary concern. In evaluating the ride comfort, relationship between passenger's feeling and vibration characteristics is very important because human feeling is dependent on frequency spectrum of vibration. Therefore, the weighing functions in frequency domain are used to evaluate the ride comfort of railway vehicles. In the present paper, we have analyzed the characteristics of the frequency weighting curves defined in many standards and reviewed the effect resulting from their difference on the ride comfort.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.26 no.2
• /
• pp.210-216
• /
• 2016

In this work, performance analysis to improve ride comfort of an ER (electrorheological) fluid damper for a mid-sized passenger vehicle in terms of tire pressure is presented. An ER damper by considering specification for a mid-sized commercial passenger vehicle is proposed and mechanically designed. After manufacturing and assembling the proposed ER damper with design parameters, their performance such as field-dependent damping forces are experimentally measured. A quarter-vehicle ER ECS (Electronic Control Suspension) system consisting of the ER damper, sprung mass, spring, sky-hook controller and tire is constructed to analysis the ride comfort performances. Vertical tire stiffness with different tire pressure is experimentally measured and investigated. In addition, ride comfort analysis such as vertical acceleration root mean square (RMS) of sprung mass is investigated under bump road using quarter-vehicle test equipment.

• Journal of the Korean Society for Railway
• /
• v.7 no.4
• /
• pp.332-338
• /
• 2004

The two projects about the high speed train have been performed in Korea, one project is the commercial run of high speed train(KTX) from Seoul to Busan and the other is the development of original high speed train(HSR 350x). As the successful results, the service run of KTX had been launched on the 1st of April, 2004 and HSR 350x had been fabricated in June, 2002 and has been tested in the Kyoungbu line and Honam line since then. The railway has the track irregularities which cause vibrations, such as rail joints, turnout, level crossing, transition curves and super-elevation ramps, and variations in the track level(z-axis) and the gauge(y-axis). Generally, the ride comfort for railway is evaluated by using the vibrations. In this paper, the ride comfort indices according to mc 513R and ISO 10056 have been reviewed when the high-speed trains are operated on both Kyoungbu line and Honam line. Also, the ride characteristics for KTX and HSR 350x on the high speed line and the conventional line have been analyzed and evaluated. The results show that the high-speed train has no problem from the viewpoint of the comfort ride on the high speed line and the conventional line and the ride index for HSR 350x is same as that for KTX in the high speed(300 km/h).

• Journal of Mechanical Science and Technology
• /
• v.15 no.5
• /
• pp.535-543
• /
• 2001

This paper presents the ride comfort analysis of a vehicle based on wavelet transform. Traditionally, the objective evaluation of impact harshness is based on the vibration dose value (VDV) and frequency weighting method. These methods do not consider the damping effect of the suspension system of a vehicle. In this paper, the damping is estimated using wavelet transform based on Morlet mother wavelet and its effect is considered for the subjective evaluation of impact harshness of a car.

• Proceedings of the KSR Conference
• /
• 2000.11a
• /
• pp.250-257
• /
• 2000

The speed-up of conventional trains is considered as one of the efficient methods to relieve traffic jam and to increase the capacity of transportation. In this study, we measured and analyzed the ride comfort of a push-pull Saemaeul Train with speed-up of 5km/h in curves and 10km/h on straight tracks as compared with present operation speed of the push-pull Saemaeul Trains. Four main lines-Honam, Kyungboo, Janghang, Kyungjeon- were chosen as representative lines for speed-up feasibility study. The increase of mean ride comfort index in case of speed-up is 0.5-2㏈. The mean ride comfort index of vertical direction in case of speed-up is 107-110㏈ for Honam line, 104-112㏈ for Kyungboo line, 108-112㏈ for Janghang line and 105-108㏈ for Kyungjeon line, which are rather high as compared with German trains of similar grade with maximum vehicle speed of 160km/h.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.10a
• /
• pp.343-348
• /
• 2011

This paper presents ride comfort characteristics of a quarter-vehicle magneto-rheological (MR) suspension system with respect to different tire pressure. As a first step, controllable MR damper is designed and modeled based on both the optimized damping force levels and mechanical dimensions required for a commercial full-size passenger vehicle. Then, a quarter-vehicle suspension system consisting of sprung mass, spring, tire and the MR damper is constructed. After deriving the equations of the motion for the proposed quarter-vehicle MR suspension system, vertical tire stiffness with respect to different tire pressure is experimentally identified. The skyhook controller is then implemented for the realization of the quarter-vehicle MR suspension system. Finally, the ride comfort analysis with respect to different tire pressure is undertaken in time domain. In addition, a comparative result between controlled and uncontrolled is provided by presenting vertical RMS displacement.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.2179-2184
• /
• 2008

The ride comfort is more important according to train speedup. Generally it is defined as the vehicle vibration. There are many studies on evaluation method of ride comfort for railway. But the ride comfort for Korean high speed train(HSR 350x) has been assessed by statistical method according to UIC 513R. In this paper, the ride indices, which are measured in the Korean high speed train, have been analyzed and reviewed by appling the statistical methodology such as t-test, variance analysis(ANOVA) and regression analysis.

• Journal of the Ergonomics Society of Korea
• /
• v.30 no.1
• /
• pp.237-250
• /
• 2011

The train transportation has a lot of advantages-energy efficiency is high, it is eco-friendly, safety is better than normal roads and it is possible for people to arrive on time. In these days, the valuation of ride comfort, which is only limited to road transportation, is newly recognized in order to having competitiveness from other transportation. Especially, in the development of the Korean high-speed railroad business, the ride comfort enhancement of train is very important problem to be solved. Currently, there are international standards of ride comfort such as UIC13, ISO2631. In Korea case, although it has own standard like KS R9216, it mainly depends on the physical parameter such as vibration and noise. So recently, in the valuation of ride comfort, the movements of living parameter technique introduction are increasing on the base of Japan and many developed countries of Europe techniques. Presently, the method of train ride comfort is mainly based of vibration, that is, mechanical parameter adding selection of variable acceleration and noise. This paper would like to show biological parameter; heart rate and blood pressure variation. This method is more direct, based on human body response, than mechanical parameter method. In this experiment, the variability of heart rate and blood pressure of passengers according to tilting angle change of Train, the Korean tilting train, we are supposed to know that the extent of tilting on the simulation has influence on variability of heart rate and blood pressure, which are living parameter of heart's blood.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.4
• /
• pp.121-128
• /
• 2005

In most researches on the ride comfort analysis of passenger vehicles, the flexibility of the vehicle body has been not considered as an important factor, because the resonance frequencies of the vehicle body related to pitching, yawing and rolling motions are below 10Hz while the resonance frequencies of the vehicle body related to the flexibility are above 20Hz approximately. Nevertheless, the paper shows that the consideration of the local flexibility (or local stiffness) of the 4 corners on which shock absorbers are mounted influences the ride comfort. A simple beam model is devised to qualitatively examine the effect of the change of the local stiffness of the vehicle body on the ride comfort. Based on the results obtained from the analysis of the one-dimensional model, multi-body dynamic analysis considering the flexibility of the vehicle body is performed using ADAMS and MSC/NASTRAN. Natural frequencies and mode shapes computed by MSC/NASTRAN are used as input data for multi-body dynamic analysis in ADAMS. Through simulations using ADAMS, it has been found that the ride comfort can be improved by changing the local stiffness of the vehicle body and that the simulation results agree with experiment results.