• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.5
• /
• pp.47-52
• /
• 2021

Recently, demand for artificial intelligence solutions for production process management has been increasing in the manufacturing industry. However, through the application of AI solutions in the manufacturing industry, there are limitations to legacy smart factory solutions such as POP and MES.Therefore, in order to overcome this, this paper aims to improve production management efficiency by applying guidance, an artificial intelligence concept, to image recognition systems. In the system flow, As_is To be separated and actual work flow was applied, and the process was improved for overall productivity efficiency. The pre-processing plan for AI guidance learning was established and the relevant AI model was designed, developed, and simulated, resulting in a 97% recognition rate.

• International journal of advanced smart convergence
• /
• v.8 no.3
• /
• pp.184-192
• /
• 2019

The existing digital signage systems inside the elevators are a lack of tailored contents appropriate to the space and environment inside or outside the elevators. Also, they almost impossible to flexibly respond to various contents disclosure according to the demand of the consumers or the elevator markets. Therefore we design and implement an IoT(Internet of Things)-based smart digital signage system for the safety of elevator passengers.. In order to provide IoT-based information to the smart digital signage within the elevator, we propose an IoT system as a set-top box with gyroscope sensor, acceleration sensor, RFID(Radio-Frequency Identification), fine dust sensor, etc., which processes various data collected by the sensors and provides the elevator passengers with various tailored contents such as elevator driving information, environmental information inside and outside the elevator, and disaster information in addition to simple advertisement information. The proposed IoT system is a set-top box that operates the smart digital signage and has an independent information control processor based on the IoT sensors that do not depend on the elevator control system. For the proposed smart digital signage, it supports an operating system that is independent of the elevator driving service as well as the media service. So the smart signage system has a characteristic that it does not depend on the elevator control system since it is a stand-along IoT-based information control system. With the proposed system providing intuitive content for the surge, steep descent, and radical movements of an elevator due to an emergency situation, the elevator passengers should be able to recognize the situation quickly and respond accordingly. In the near future, the proposed system will expand the market of digital signage applied in conjunction with the development of contents in the disaster, safety and environment fields, and expect expected to revitalize related industries associated with signage.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.44 no.4
• /
• pp.208-219
• /
• 2021

In the era of the 4th industrial revolution driven by the convergence of ICT(information and communication technology) and manufacturing, research on smart factories is being actively conducted. In particular, the manufacturing industry prefers smart factories that autonomously connect and analyze data. For the efficient implementation of smart factories, it is essential to have an integrated production system that vertically integrates separately operated production equipment and heterogeneous S/W systems such as ERP, MES. In addition, it is necessary to double-verify production data by using automatic data collection technology so that the production process can be traced transparently. In this study, we want to show a case of data-centered integration of a large aircraft parts processing factory that requires high precision, takes a long time, and has the characteristics of processing large raw materials. For this, the components of the data-oriented integrated production system were identified and the connection structure between them was explained. And we would like to share the experience gained through the design and implementation case. The integrated production system proposed in this study integrates internal components based on data, which is expected to serve as a basis for SMEs to develop into an advanced stage, and traces materials with RFID technology.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.1
• /
• pp.177-182
• /
• 2023

The Act on the Promotion of Mobility for the Transportation Vulnerable stipulates that the transportation vulnerable should be able to enjoy convenience when using public transportation. However, this law is not being implemented properly enough to bring up a petition saying, "Please allow the visually impaired to take a bus." Even if you try to use a call taxi for the disabled instead of public transportation, you have to apply and wait two to three hours. Therefore, this paper aims to design and implement systems for the vulnerable and their guardians, such as increasing the opening time of the ticket gate more than usual if the cane rings a notification on the bus and subway station designated using Bluetooth. Accordingly, it is expected to bring about effects such as the availability of public transportation, economic savings, safety guarantees, and prevention of missing children for the vulnerable.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.6
• /
• pp.51-56
• /
• 2022

With the development of industrialization, the amount of food and waste is rapidly increasing. Accordingly, the government is aware of the seriousness and is making efforts in various ways to reduce it. As a part of that, the volume-based food system was introduced, and although there were several trials and errors at the beginning of the introduction, it shows a reduction effect of 20 to 30%. These results suggest that the volume-based food system is being established. However, the waste is caused by foreign substances in the process of recycling resources by collecting them from the 1st collection to the 2nd collection process. Therefore, in this study, to solve these problems fundamentally, artificial intelligence is applied to classify foreign substances and improve them. Due to the nature of food waste, there is a limit to obtaining many images, so we compare several models based on CNNs and classify them as abnormal data, that is, CNN-based models are trained on various types of foreign substances, and then models with high accuracy are selected. We intend to prepare improvement measures for maintenance, such as manpower input to protect equipment and classify foreign substances by applying it.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.20 no.3
• /
• pp.97-114
• /
• 2009

The roles and services of a library have historically been influenced and developed by the change of information technologies. The ubiquitous technologies have been widely studied for medical area, construction, commerce, broadcasting, telecommunication and so on. The ubiquitous technologies have extended to the roles and services in a library. The development of ubiquitous IT, the roles and functions of a library and information center should be changed. To adjust evolving environment, this study focuses on concept and definition of ubiquitous computing and networks. Especially, with requirements and essential technologies which can be a technological infrastructure for ubiquitous life, library services and roles in ubiquitous life are discussed by literature review, case analysis and expert interview. With the results, this study proposes that library services and roles in ubiquitous life should be considered in two ways which are network and physical spaces. Also, roles of a library in ubiquitous life will be extended to culture and education center including traditional information center. To perform those roles and services, a library should develop various service programs relating culture and education such as personalized service and educational program.

• Journal of Aerospace System Engineering
• /
• v.17 no.2
• /
• pp.16-25
• /
• 2023

There are various types of foreign object debris (FOD) in the aviation industry. Tools lost by workers can act as a risk factor throughout aircraft operation, manufacturing, and maintenance fields. Accidents caused by tools lost due to workers' carelessness continue to occur throughout the aviation industry. Aviation-related institutions such as FAA and EASA have established tool control regulations and systems to prevent FOD occurrence. However, in Korea, related regulations and procedures are insufficient. A systematic and effective tool control system is required for reliable manufacturing, airworthiness, operation, and maintenance of aircraft. In this paper, tool control regulations and procedures of domestic and foreign air traffic authorities and aviation industry-related organizations were studied. A wireless communication-based tool control system was proposed based on the NAS 412's tool control regulations certified by the National Standards Association.

• International conference on construction engineering and project management
• /
• 2011.02a
• /
• pp.187-194
• /
• 2011

Optimizing truck dispatching-intervals is imperative in ready mixed concrete (RMC) delivery process. Intervals shorter than optimal may induce queuing of idle trucks at a construction site, resulting in a long delivery cycle time. On the other hand, intervals longer than optimal can trigger work discontinuity due to a lack of available trucks where required. Therefore, the RMC delivery process should be systematically scheduled in order to minimize the occurrence of waiting trucks as well as guarantee work continuity. However, it is challenging to find optimal intervals, particularly in urban areas, due to variations in both traffic conditions and concrete placement rates at the site. Truck dispatching intervals are usually determined based on the concrete plant managers' intuitive judgments, without sufficient and reliable information regarding traffic and site conditions. Accordingly, the RMC delivery process often experiences inefficiency and/or work discontinuity. Automatic data collection (ADC) techniques (e.g., RFID or GPS) can be effective tools to assist plant managers in finding optimal dispatching intervals, thereby enhancing delivery performance. However, quantitative evidence of the extent of performance improvement has rarely been reported to data, and this is a central reason for a general reluctance within the industry to embrace these techniques, despite their potential benefits. To address this issue, this research reports on the development of a discrete event simulation model and its application to a large-scale building project in Abu Dhabi. The simulation results indicate that ADC techniques can reduce the truck idle time at site by 57% and also enhance the pouring continuity in the RMC delivery process.

• Korean Security Journal
• /
• no.24
• /
• pp.91-123
• /
• 2010

The threat factors available for occurrence given G20 Summit Meeting are expected leader terrorism, hostage terrorism, bomb terrorism, public facilities terrorism, and aircraft terrorism. As for the threat groups, which are expected in Korea, the North Korea, Islam extremist group, and the group such as NGO organization of being opposed to international meeting are regarded as having possibility of causing hazard. Thus, the purpose of this study is to suggest VIP Security-measure plans in the main site in preparation for G20 Summit Meeting. Accordingly, each country in the world is adopting 'the principle of Triple Ring' in common. Thus, it elicited a coping plan by 1st line(inner ring) 2nd line(middle ring) 3rd line(outer ring) based on this principle, and proposed even an opinion together that will need to be reflected in light of policy for the VIP security measures. In conclusion, as for the VIP Security-measure plans in the main site in preparation for G20 Summit Meeting, In the inner ring(safety sector), first, an intercepting measure needs to be devised for a spot of getting into and out of vehicles given the Straight Street. Second, the Walking Formation needs to be reinforced boldly in the exposed area. In the middle ring(security sector), first, the control plan needs to be devised by considering particularity of the main site. Second, there is necessity for adopting the efficient security badge operation plan that is included RFID function within security badge. In the outer ring(aid protective sector), first, there is necessity of preparing for several VIP terrorisms, of collecting information and intelligence, and of reinforcing the information collection system against terrorism under the cooperation with the overseas information agency. Second, the urgent measure training in time of emergency needs to be carried out toward security agent event manpower. Third, to maintain the certain pace in VIP motorcade, the efficient traffic control system needs to be operated. Finally, as for what will need to be reflected in light of policy for VIP security measures, first, there is necessity for allowing VIP residence to be efficiently dispersed to be distributed and controlled. Second, there is necessity for allowing impure element to misjudge or attack to be failed by utilizing diverse deception operations. Third, according to the reorganization in North Korea's Organization of the South Directed Operations, the powerful 'military-support measure' needs to be driven from this G20 Summit Meeting. For this, the necessity was proposed for further reinforcing the front back defense posture under the supervision of the Ministry of National Defense and for positively coping even with detecting and removing poison in preparation for CBR (chemical, biological, and radio-logical) terrorism.

• Journal of Intelligence and Information Systems
• /
• v.16 no.4
• /
• pp.147-157
• /
• 2010

With the immergence of the iPhone, the interest in Smartphones is getting higher as services can be provided directly between service providers and consumers without the network operators. As the number of international tourists increase, individual tourists are also increasing. According to the WTO's (World Tourism Organization) prediction, the number of international tourists will be 1.56 billion in 2020,and the average growth rate will be 4.1% a year. Chinese tourists, in particular, are increasing rapidly and about 100 million will travel the world in 2020. In 2009, about 7.8 million foreign tourists visited Korea and the Ministry of Culture, Sports and Tourism is trying to attract 12 million foreign tourists in 2014. A research institute carried out a survey targeting foreign tourists and the survey results showed that they felt uncomfortable with communication (about 55.8%) and directional signs (about 21.4%) when they traveled in Korea. To solve this inconvenience for foreign tourists, multilingual servicesfor traffic signs, tour information, shopping information and so forth should be enhanced. The appearance of the Smartphone comes just in time to provide a new service to address these inconveniences. Smartphones are especially useful because every Smartphone has GPS (Global Positioning System) that can provide users' location to the system, making it possible to provide location-based services. For improvement of tourists' convenience, Seoul Metropolitan Government hasinitiated the u-tour service using Kiosks and Smartphones, and several Province Governments have started the u-tourpia project using RFID (Radio Frequency IDentification) and an exclusive device. Even though the u-tour or u-tourpia service used the Smartphone and RFID, the tourist should know the location of the Kiosks and have previous information. So, this service did not give the solution yet. In this paper, I developed a new convenient service which can provide location based information for the individual tourists using GPS, WiFi, and 3G. The service was tested at Insa-dong in Seoul, and the service can provide tour information around the tourist using a push service without user selection. This self-tour service is designed for providing a travel guide service for foreign travelers from the airport to their destination and information about tourist attractions. The system reduced information traffic by constraining receipt of information to tourist themes and locations within a 20m or 40m radius of the device. In this case, service providers can provide targeted, just-in-time services to special customers by sending desired information. For evaluating the implemented system, the contents of 40 gift shops and traditional restaurants in Insa-dong are stored in the CMS (Content Management System). The service program shows a map displaying the current location of the tourist and displays a circle which shows the range to get the tourist information. If there is information for the tourist within range, the information viewer is activated. If there is only a single resultto display, the information viewer pops up directly, and if there are several results, the viewer shows a list of the contents and the user can choose content manually. As aresult, the proposed system can provide location-based tourist information to tourists without previous knowledge of the area. Currently, the GPS has a margin of error (about 10~20m) and this leads the location and information errors. However, because our Government is planning to provide DGPS (Differential GPS) information by DMB (Digital Multimedia Broadcasting) this error will be reduced to within 1m.