• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2005년도 제25회 추계학술대회논문집
• /
• pp.132-135
• /
• 2005

하이드라진을 추진제로 쓰는 아크젯 추력기 내의 열화학적 유동장을 전산유체를 이용해 해석하였다. Ohm가열 및 Lorentz힘을 고려하기 위하여 Maxwell 방정식과 연계된 RANS 방정식을 이용하였으며, 매우 빠른 반응 및 광학적으로 두꺼운 매질을 가정하여 이온화와 열복사를 해석에 포함하였다. 해석의 결과는 아크젯 추력기 내부 유동의 열-물리적 이해와 더불어 0.6 kW 가열에 의하여 하였을 때 추력과 비추력이 각각 20%와 70%가 향상됨을 보여주었다.

• 대한기계학회논문집B
• /
• 제30권4호
• /
• pp.364-372
• /
• 2006

The objective of this study is to evaluate the efficiency and the prediction accuracy of developed large eddy simulation (LES) program for complex turbulent flows, such as recirculating and swirling flows. To save the computational cost, a Beowulf cluster system consisting 16 processors was constructed. The flows in backward-facing step and dump combustor were examined as representative recirculating and swirling flows. Firstly, a direct numerical simulation (DNS) for laminar backward-facing step flows was previously conducted to validate the overall performance of program. Then LES was carried out for turbulent backward-facing step flows. The results of laminar flow showed a qualitative and quantitative agreement between simulations and experiments. The simulations of the turbulent flow also showed reasonable results. Secondly, LES results for non-swirling and swirling flows in a dump combustor were compared with the results of Reynolds-averaged Navier-Stokes (RANS) using standard $k-{\varepsilon}$ model. The results show that LES has a better performance in predicting the mean axial and azimuthal velocities, comer recirculation zone (CRZ) and center toroidal recirculation zone (CTRZ) than those of RANS. Finally, it was examined the capability of LES for the description of unsteady phenomena.

• 한국소음진동공학회논문집
• /
• 제24권3호
• /
• pp.205-212
• /
• 2014

이 연구에서 현대자동차의 단순실험모델(HSM)에 대한 썬루프 버페팅에 대한 수치해석이 수행되었다. 검증을 위하여 HSM 목부위의 경계층에 대한 속도분포 해석결과를 실험결과와 비교하였다. 썬루프 해석은 두 단계로 이루어졌다. 첫 번째로 난류 RANS 모델을 이용하여 정상상태 해석이 수행되었으며, 해석결과는 CAA++의 입력값으로 사용된다. 두 번째 단계는 유동속도에 대한 1차 최대 압력피크와 버페팅 주파수 해석을 위한 비정상상태 해석이 CAA++에서 이루어졌다. 주파수와 음향압력의 수치해석 결과는 타당한 물리적 현상을 보여주고 있으며, 현대 자동차의 실험결과와 잘 일치하는 결과를 보여주었다.

• 한국전산유체공학회지
• /
• 제14권3호
• /
• pp.115-122
• /
• 2009

Numerical methods are applied to simulate the smoke behavior in a ventilated tunnel using large eddy simulation (LES) which is incorporated in FDS (Fire Dynamics Simulator) with proper combustion and radiation model. In this study, present numerical results are compared with data obtained from experiments on pool fires in a ventilated tunnel. The model tunnel is $182m(L){\times}5.4m(W){\times}2.4m(H)$. Two fire scenarios with different ventilation rates are considered with two different fire strengths. The present results are analyzed with those from LES without combustion and radiation model and from RANS ($\kappa-\epsilon$) model as well. Temperature distributions caused by fire in tunnel are compared with each other. It is found that thermal stratification and smoke back-layer can be predicted by FDS and the temperature predictions by FDS show better results than LES without combustion and radiation model. The FDS solver, however, failed to predict correct flow pattern when the high ventilation rate is considered in tunnel because of the defects in the tunnel-inlet turbulence and the near-wall turbulence.

• 한국유체기계학회 논문집
• /
• 제13권6호
• /
• pp.42-50
• /
• 2010

The present analysis deals with a numerical procedure for optimizing the shape of elliptical dimples in a cooling channel. The three-dimensional Reynolds-averaged Navier-Stokes (RANS) analysis is employed in conjunction with the SST model for predictions of the turbulent flow and the heat transfer. Three non-dimensional geometric design variables, such as the ellipse dimple diameter ratio, ratio of the dimple depth to the average diameter, and ratio of the distance between dimples to the pitch are considered in the optimization. Twenty-one experimental points within design space are selected by Latin Hypercube Sampling. Each objective function values at these points are evaluated by RANS analysis and producing optimal point using surrogate model. The linear combination of heat transfer coefficient and friction loss related terms with a weighting factor is defined as the objective function. The results show that the optimized elliptical dimple shape improves considerably the heat transfer performance than the circular dimple shape.

• 에너지공학
• /
• 제21권3호
• /
• pp.228-236
• /
• 2012

큰 에디 모사(LES)는 복잡한 연소실 유동에서 RANS 모델과 비교해 난류 유동장에 대해 모델의 보편성과 더 정확한 결과를 제공하기 때문에 점차적으로 사용이 증대되고 있다. 내연 기관의 연소실 내 난류 유동장 해석을 큰 에디 모사를 사용하여 수행하였다. 이산화 방식, 초기 조건, 시간 간격과 SGS 모델과 같은 모델과 수치 인자에 따른 영향을 평가하였다. SGS 모델을 사용한 LES 모사는 실험치와 유사한 결과를 보여주었다.

• 대한조선학회논문집
• /
• 제34권3호
• /
• pp.9-18
• /
• 1997

복합추진장치가 포함된 경우와 포함되지 않은 경우의 축대칭 물체 주위 유동특성을 조사하기 위한 실험적 수치적 연구가 수행되었다. 축대칭 물체주위 유동특성 파악을 위해 선박해양공학연구센터의 캐비테이션 터널에서 표면압력분포와 LDV 장치를 이용한 주위유속분포 계측 시험이 우선적으로 이루어졌으며, 비압축성 RANS 방정식을 유한체적법으로 해석하는 수치적 방법이 표준 k-${\varepsilon}$ 난류모형을 이용하여 수행되었다. 선체와 프로펠러 상호작용은 양력면이론에 의하여 계산된 유기속도를 프로펠러 면에 분포하여 경계조건으로 처리하는 방법을 택하였다. 추진장치의 여러 가지 배열변화에 따른 실험적 결과를 기반으로 타당한 수치적 방법이 개발될 수 있다고 생각된다.

• 상하수도학회지
• /
• 제27권2호
• /
• pp.177-184
• /
• 2013

This study analyzed the hydraulic characteristics of a venturi flume with a circular cone using a 3-D numerical model which uses RANS(Reynolds-Averaged Navier-Stokes Equation) as the governing equation. The venturi flume with the circular cone efficiently measures the discharge in the low-flow to high-flow range and offers the advantage of accurate discharge measurements in the case of a low flow. With no influence of the tail-water depth, the stage-discharge relationship and the flow behaviors were analyzed to verify the numerical simulation results. Additionally, this study reviewed the effect of the tail-water depth on the flow. The stage-discharge relationship resulting from a numerical simulation in the absence of an effect by the tail-water depth showed a maximum margin of error of 4 % in comparison to the result of a hydraulic experiment. The simulation results reproduced the overall flow behaviors observed in the hydraulic experiment well. The flow starts to become influenced by the tail-water depth when the ratio of the tail-water depth to the total head exceeds approximately 0.7. As the ratio increases, the effect on the flow tends to grow dramatically. As shown in this study, a numerical simulation is effective for identifying the stage-discharge relationship of a venturi flume with various types of venturi bodies, including a venturi flume with a circular cone.

• 한국항공우주학회지
• /
• 제39권3호
• /
• pp.201-209
• /
• 2011

NREL Phase VI 수평축 풍력터빈 주위의 3차원 유동에 대하여 미끄럼 격자 기법을 사용한 비정상 RANS 해석을 수행하였다. 블레이드/타워의 간섭영향을 해석하기 위하여 로터단일과 로터/타워/나셀의 2가지 해석 모델을 구축하였다. 로터/타워/나셀의 해석 결과를 NREL의 실험데이터와 비교하여 CFD 해석모델의 유용성을 확인하였다. 두 모델에 의한 해석 결과의 비교를 통하여 비록 상풍형 풍력터빈으로서 작기는 하지만 타워/나셀의 영향이 확실히 나타나는 것을 확인하였다. 다른 가시화 결과와 토크를 포함한 적분 공력하중 등도 구축한 CFD 모델의 비정상 유동해석 능력이 효과적임을 보여주고 있다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제5권2호
• /
• pp.287-301
• /
• 2013

The present paper deals with the problems of yaw angle effects on podded propulsor performance. The study aims at providing insights on characteristics of podded propulsors in azimuthing condition. In this regard, a wide numerical simulation that concerned yaw angle effect measurement on podded propeller performance was performed. The Reynolds-Averaged Navier Stokes (RANS) based solver is used in order to study the variations of hydrodynamic characteristics of podded propulsor at various angles. At first, the propeller is analyzed in open water condition in absence of pod and strut. Next flow around pod and strut are simulated without effect of propellers. Finally, the whole unit is studied in zero yaw angle and azimuthing condition. Structured and unstructured mesh techniques are used for single propeller and podded propulsor. The performance curves of the propeller obtained by numerical method are compared and verified by the experimental results. The characteristic parameters including the torque and thrust of the propeller, the axial force and side force of unit are presented as function of velocity advance ratio and yaw angle. The results shows that the propeller thrust, torque and podded unit forces in azimuthing condition depend on velocity advance ratio and yaw angle.