• 한국음향학회지
• /
• 제39권4호
• /
• pp.351-363
• /
• 2020

발사체는 비행 중 공기역학적 현상에 기인하는 음향하중의 영향을 받는데, 특별히 천음속 영역에서 그 영향이 증가된다. 음향하중으로 인한 페어링 내부 소음진동은 탑재물의 오작동을 유발할 수 있어 이를 예측하고 저감하는 과정이 필수적이다. 본 연구에서는 발사체 외부에 작용하는 공기역학적 음향하중에 의한 페어링 내부 음향 진동환경을 예측하고, 음향 블랭킷과 헬름홀츠 공명기를 이용하여 소음저감 설계를 구현하는 프로세스를 개발하였다. 음향하중 예측은 Reynolds-Averaged Navier-Stokes(RANS) 유동해석 결과와 난류 경계층 내부 압력섭동에 관한 준 경험식을 이용하였고, 음향진동 연성해석은 ANSYS APDL과 VA One SEA의 Finite Element Statistical Energy Analysis(FE-SEA) 하이브리드 해법을 이용하였다. 개발된 절차를 천음속 해머 헤드형 발사체에 적용하여 음향하중 저감효과를 확인하고 개발된 절차의 유효성을 검증하였다. 본 연구에서 개발된 절차는 타당한 수준의 정확도로 신속한 결과를 얻을 수 있어 발사체 초기설계 단계에 유용하게 쓰일 수 있을 것으로 예상된다.

• 대한조선학회논문집
• /
• 제39권3호
• /
• pp.8-17
• /
• 2002

RANS 방정식의 수치 해법을 사용해서 선박용 추진기 주의의 점성 유동을 계산함으로써 모형 프로펠러 3개(P4119, P4842, KRISO 포드 프로펠러)의 단독 성능을 해석하였다. 프로펠러 단독성능과 날개 압력 분포 그리고 프로펠러 근방의 평균 속도 분포에 대한 본 연구의 수치 해석 결과를 실험 결과와 비교하였으며, 대체로 두 결과가 서로 잘 일치하는 것이 확인되었다. 그러나, 프로펠러 날개 앞날의 압력과 포드 프로펠러의 단독 성능에 대한 본 연구의 결과는 실험 결과와 잘 맞지 않는 것으로 나타났다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.416-421
• /
• 2001

This paper presents the numerical prediction of sound generated by viscous flow past a circular cylinder. The two dimensional flow field is predicted using FEM based Reynolds-averaged Navier-Stokes solver, and the calculated unsteady fluid field values are utilized by an acoustic code that implements Ffowcs Willianms-Hawkings(FW-H) equation. The integration surface used in acoustic analysis is extended from the cylinder surface to permeable surfaces. The 2D based CFD calculations overpredict the acoustic amplitude, however, if adequate correlation length is used, the predicted acoustic amplitude agrees well with experiment. The predictions using extended integral surface in FW-H equation show results that contain the characteristics of quadrupole - volume integration - noise term, and do not vary seriously with the integral surface location.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.305-310
• /
• 2001

This paper presents the computational method for analyzing the compressible flow fields in a high voltage gas circuit breaker. There are many difficult problems in analyzing the gas flow in GCB due to complex geometry, moving boundary, shock wave and so on. In particular, the distortion problem of the grid due to the movement of moving parts can be worked out by the fixed grid technique. Numerical simulations are based on a fully implicit finite volume method of the compressible Reynolds-averaged Navier-Stokes equations to obtain the pressure, density, and velocity through the entire interruption process. The presented method is applied to the real circuit breaker model and the pressure in front of the piston is good agreement with the experimental one.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권1호
• /
• pp.182-190
• /
• 2001

The aerodynamics of the Wells turbine has been studied using 3-d, unstructured mesh flow solver for the Reynolds-averaged Navier-Stokes equations. The basic feature of the Wells turbine is that even though the cyclic airflow produces oscillating axial forces on the airfoil blades, the tangential force on the rotor is always in the same direction. Geometry used to define 3-D numerical grid is based upon that of an experimental test rig. The 3-D Wells turbine model, consisting of approximate 220,000 cells is tested of four axial flow rates. In the calculations the angle of attack has been varied between 10˚ and 30˚ of blades, Representative results from each case are presented graphically andy analysed. It is concluded that this technique holds much promise for future development of Wells turbines.

• 한국유체기계학회 논문집
• /
• 제12권3호
• /
• pp.7-12
• /
• 2009

In this paper, shape optimization based on three-dimensional flow analysis has been performed for impeller design of centrifugal compressor. To evaluate the objective function of an isentropic efficiency, Reynolds-averaged Navier-Stokes equations are solved with SST (Shear Stress Transport) turbulence model. The governing equations are discretized by finite volume approximations. The optimization techniques based on the radial basis neural network method are used for the optimization. Latin hypercube sampling as design of experiments is used to generate thirty design points within design space. Sequential quadratic programming is used to search the optimal point based on the radial basis neural network model. Four geometrical variables concerning impeller shape are selected as design variables. The results show that the isentropic efficiency is enhanced effectively from the shape optimization by the radial basis neural network method.

• 한국유체기계학회 논문집
• /
• 제16권2호
• /
• pp.35-41
• /
• 2013

Inlet part of a printed circuit heat exchanger has been optimized by using three-dimensional Reynolds-Averaged Navier-Stokes analysis and surrogate modeling techniques. Kriging model has been used as the surrogate model. The objective function for the optimization has been defined as a linear combination of uniformity of mass flow rate and the pressure loss with a weighting factor. For the optimization, the angle of the inlet plenum wall, radius of curvature of the inlet plenum wall, and width of the inlet pipes have been selected as design variables. Twenty six design points are obtained by Latin Hypercube Sampling in design space. Through the optimization, considerable improvement in the objective function has been obtained in comparison with the reference design of PCHE.

• 동력기계공학회지
• /
• 제19권5호
• /
• pp.80-85
• /
• 2015

The unsteady-state, incompressible and three-dimensional large eddy simulation(LES) was carried out to analyze the structure of turbulent flow fields according to the operating loads of three-dimensional small-size axial fan(SSAF). LES shows the best prediction performance in comparison with any other Reynolds averaged Navier-Stokes(RANS) method because static pressure coefficients analysed by LES show a little bit larger than measurements including all flow coefficients. Also, it can be known that the wake of SSAF is divided into from axial flow to radial flow before and behind stall region according to the increase of static pressure through LES analysis.

• 한국전산유체공학회지
• /
• 제16권1호
• /
• pp.14-21
• /
• 2011

Super-cavitating flows around under-water bodies are being studied for drag reduction and dramatic speed increase. In this paper, high speed super-cavitating flow around a two-dimensional symmetric wedge-shaped body were studied using an unsteady Reynolds-averaged Navier-Stokes equations solver based on a cell-centered finite volume method. To verify the computational method, flow over a hemispherical head-form body was simulated and validated against existing experimental data. Various computational conditions, such as different wedge angles and caviation numbers, were considered for the super-cavitating flow around the wedge-shaped body. Super-cavity begins to form in the low pressure region and propagates along the wedge body. The computed cavity lengths and velocities on the cavity boundary with varying cavitation number were validated by comparing with analytic solution.

• 대한기계학회논문집B
• /
• 제30권8호
• /
• pp.715-721
• /
• 2006

In the present work, nozzle shape of a jet fan is optimized numerically using three-dimensional Reynolds-averaged Navier-Stokes analysis. Standard $k-{\epsilon}$ model is used as a turbulence closure. Response surface method is employed as an optimization technique. The objective function is defined as maximum throw distance. Three geometric variables, i.e., length and angle of nozzle, and interval between two nozzles, are selected as design variables. As the main result of the optimization, the throw distance has been improved effectively.