• Journal of Welding and Joining
• /
• 제28권5호
• /
• pp.64-68
• /
• 2010

The purpose of this study is to develop the control technology of global distortion in the deck of superstructures during manufacturing processes. The behavior of global distortion in the deck was evaluated by FEA and verified through comparing with the measured results by 3D measuring instrument. It was seen from the results that the principal factor inducing the global distortion is to be the bending moment associated with the longitudinal shrinkage force and transverse shrinkage caused by welding of stiffeners and flame heating to correct the excessive local out-of-plane distortion. Based on the results, the amount of reverse distortion in the thin deck plate was determined to control the global distortion in the deck plate. The proposed distortion control technology was verified by applying it to the actual structure.

• 반도체디스플레이기술학회지
• /
• 제8권4호
• /
• pp.7-13
• /
• 2009

The slender device(long length and thin width) manufactured by stereolithography process suffers from large curl distortion. This paper adapts two control parameters such as a critical exposure and a penetration depth. The measurement of the test parts dimension are carried out by reverse engineering method with the optical 3-dimensional measurement equipment. We investigate how each parameter contributes to the part accuracy and estimates the optimal set of parameters which minimizes the dimensional error of the test parts. Finally, As being an the RAM slot as being an example of the slender device, the RAM slot is made with the optimal values of control parameter and the results are investigated

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2007년도 추계종합학술대회
• /
• pp.281-284
• /
• 2007

A realization for image distortion correction processing system with DSP processor is presented in this paper. The image distortion correcting algorithm is realized by DSP processor for focusing on more real time processing than image quality. The lens and camera distortion coefficients are processed by YCbCr Lookup Tables and the correcting algorithm is applied to reverse mapping method for geometrical transform. The system experimentation results in the processing time about 34.6 msec on $720{\times}480$ curved image at 150 degree visual range.

• 한국정보통신학회논문지
• /
• 제11권11호
• /
• pp.2116-2120
• /
• 2007

본 논문은 어안 렌즈 카메라의 영상 왜곡 보정 처리 시스템 구현에 관한 것이다. 영상 보정 처리 알고리즘은 역맵핑기법을 적용하고 실시간 처리를 위해 DSP 프로세서를 사용하여 시스템을 구현하였다. 알고리즘 적용시 카메라의 왜곡 계수는 실시간 처리를 위해 룩업 테이블화하여 처리한다. 실험 결과, 원영상과 각도변화에 대한 PSNR 변화는 8.3%정도로 안정적 자연스러우며, 화질보다는 실시간 처리에 중점을 두어 한 프레임 $720{\times}480$ 왜곡영상 처리 시간이 약 31.3ms 소요되었다.

• Journal of Welding and Joining
• /
• 제28권4호
• /
• pp.41-48
• /
• 2010

The purpose of this study is to establish the control method of the global bending distortion caused by fabrication process of hatch-cover in a container ship. In order to do it, the transitional behavior of global bending distortion in the deck of hatch-cover during fabrication process was measured by 3-dimensional measuring instrument. From the results, the principal factor controlling the global bending distortion was identified as the bending moment associated with the longitudinal shrinkage force and transverse shrinkage caused by welding and flame heating and the change of the centroid axis of hatch-cover in each fabrication process. Therefore, in this study, with the predictive equations of the longitudinal shrinkage force and transverse shrinkage caused by welding and flame heating and the simplified thermo elastic method, the predictive method for the global bending distortion was established and verified by comparing with the measured result. Based on the results, the amount of reverse bending distortion of main stiffeners was determined to prevent the global bending distortion of hatch-cover.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 추계학술대회
• /
• pp.420-425
• /
• 2003

Generally, reverse engineering means getting CAD data from unidentified shape using vision or 3D laser scanner system. In this paper, we studied unidentified model by machine vision based reverse engineering system to get information about in-processing model. Recently, vision technology is widely used in current factories, because it could inspect the in-process object easily, quickly, accurately. The following tasks were mainly investigated and implemented. We obtained more precise data by corning camera's distortion, compensating slit-beam error and revising acquired image. Much more, we made similar curves or surface with B-spline approximation for precision. Until now, there have been many case study of shape recognition. But it was uncompatible to apply to the field, because it had taken too many processing time and has frequent recognition failure. This paper propose recognition algorithm that prevent such errors and give applications to the field.

• 한국전자통신학회논문지
• /
• 제5권2호
• /
• pp.145-151
• /
• 2010

본 논문에서는 두 개의 음으로부터 전달되어온 음장의 상태를 구하여 역 필터를 구성하는 적응필터 및 신경회로망을 사용한 음장의 역 필터링 시스템을 제안한다. 본 논문에서는 최소 2승 평균법을 사용하여 FIR 필터의 계수를 계산하여 이를 갱신함으로써 역 필터링을 구축하는 방법을 사용한다. 본 논문에서 제안한 신경회로망 및 적응필터의 기법에 의하여 비선형 왜곡이 있는 간단한 파형이 학습 가능한 것을 실험 결과로부터 확인할 수 있었다.

• 대한원격탐사학회지
• /
• 제19권6호
• /
• pp.431-445
• /
• 2003

본 연구에서는 사진측량 관점에서 4S-Van 영상을 이용한 3차원 위치결정의 정밀도를 실험적으로 검증하였다. 실외에 3차원 검정타겟을 설치하고 45-Van에 탑재된 2대의 CCD카메라로부터 검정타겟 영상을 개별적으로 취득하여 자체검정기법으로 각각의 CCD카메라에 대한 내부표정요소를 개별적으로 정확하게 결정하였다. 이와 같이 얻어진 내부표정요소와 검정타겟의 지상좌표 및 검정타겟을 동시에 촬영한 좌ㆍ우측 카메라의 영상좌표를 이용하여 광속조정법으로 2대 CCD카메라의 외부표정요소를 동시에 결정하였다. 또한, 렌즈왜곡이 고려된 에피폴라선을 이용하기 위하여 역렌즈왜곡계수를 최소제곱법을 이용하여 결정하였다. 역렌즈왜곡계수를 이용하여 약 0.5 pixel 이내로 렌즈왜곡이 포함된 영상좌표로 변환이 가능하였다. 렌즈왜곡이 고려된 에피폴라선을 이용한 반자동 영상매칭을 적용하여 3차원 위치결정의 정밀도를 검증하였다. 실험적으로 촬영거리 20m이내에서는 대략2cm 정도의 정밀도를 얻을 수 있었다.

• Archives of Plastic Surgery
• /
• 제49권3호
• /
• pp.423-426
• /
• 2022

Reconstruction of the upper lateral lip subunit is challenging, and use of several classical local flaps have been previously reported. However, these methods have drawbacks such as visible scarring, anatomic distortion, and functional disability. To obtain satisfactory results, preservation of perioral function is important. We report a case of functional upper lip reconstruction after tumor resection using a reverse facial-submental artery island flap with a reinnervated anterior belly of the digastric muscle (ABDM) without sacrificing the perioral structure. A 73-year-old man presented with basal cell carcinoma on the left upper lip which was widely excised, including the orbicularis oris muscle. The remaining 4 cm × 3.5 cm defect was reconstructed using a reverse facial-submental artery island flap with ipsilateral ABDM. The motor nerve of the ABDM was sutured with the stump of the buccal branch of the ipsilateral facial nerve. The postoperative course was uneventful, and good functional and esthetic recovery were observed at 12-month follow-up. This procedure may be an alternative option for reconstruction of lateral upper lip defects.

• 대한조선학회논문집
• /
• 제53권4호
• /
• pp.275-281
• /
• 2016

One of the most important things for quality to meet ship-production schedule is an accuracy control. A ship is assembled by welding through whole production process, so it is important that loss by correction will not happen as much as possible by using some engineering skills like reverse design, reverse setting and margin for thermal shrinkage. These efforts are a quite effective in fabrication stages, but not in erection stages. If a ship block which consists of common steel is exposed to directional solar radiation, its dimensional accuracy will change high as time by its thermal expansion coefficient. Therefore, the measuring work would be often done at dawn or evening even with having a very accurate device. In this study, an FE analysis method is developed to solve this problem. It can change measured data affected by solar thermal distortion to ones not, even though ship-block is measured at an arbitrary time. It will use the time when measuring, the direction of block and the weather record by satellites. It is confirmed by a comparison between measured data of a ship-block and the result by suggested analysis method. Furthermore, a pre-processing system is also developed for fast application of the suggested analysis method.