• Journal of Welding and Joining
• /
• v.28 no.5
• /
• pp.64-68
• /
• 2010

The purpose of this study is to develop the control technology of global distortion in the deck of superstructures during manufacturing processes. The behavior of global distortion in the deck was evaluated by FEA and verified through comparing with the measured results by 3D measuring instrument. It was seen from the results that the principal factor inducing the global distortion is to be the bending moment associated with the longitudinal shrinkage force and transverse shrinkage caused by welding of stiffeners and flame heating to correct the excessive local out-of-plane distortion. Based on the results, the amount of reverse distortion in the thin deck plate was determined to control the global distortion in the deck plate. The proposed distortion control technology was verified by applying it to the actual structure.

• Journal of the Semiconductor & Display Technology
• /
• v.8 no.4
• /
• pp.7-13
• /
• 2009

The slender device(long length and thin width) manufactured by stereolithography process suffers from large curl distortion. This paper adapts two control parameters such as a critical exposure and a penetration depth. The measurement of the test parts dimension are carried out by reverse engineering method with the optical 3-dimensional measurement equipment. We investigate how each parameter contributes to the part accuracy and estimates the optimal set of parameters which minimizes the dimensional error of the test parts. Finally, As being an the RAM slot as being an example of the slender device, the RAM slot is made with the optimal values of control parameter and the results are investigated

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.281-284
• /
• 2007

A realization for image distortion correction processing system with DSP processor is presented in this paper. The image distortion correcting algorithm is realized by DSP processor for focusing on more real time processing than image quality. The lens and camera distortion coefficients are processed by YCbCr Lookup Tables and the correcting algorithm is applied to reverse mapping method for geometrical transform. The system experimentation results in the processing time about 34.6 msec on $720{\times}480$ curved image at 150 degree visual range.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.11
• /
• pp.2116-2120
• /
• 2007

A realization for image distortion correction processing system with DSP processor is presented in this paper. The image distortion correcting algorithm is realized by DSP processor for focusing on more real time processing than image quality. The lens and camera distortion coefficients are processed by the Lookup Tables and the correcting algorithm is applied to reverse mapping method for geometrical transform. The system experimentation results in the processing time about 31.3 msec $720{\times}480$ wide range image, and the image is stable and spontaneous to be about 8.3% average PSNR variation with changing a wide angle.

• Journal of Welding and Joining
• /
• v.28 no.4
• /
• pp.41-48
• /
• 2010

The purpose of this study is to establish the control method of the global bending distortion caused by fabrication process of hatch-cover in a container ship. In order to do it, the transitional behavior of global bending distortion in the deck of hatch-cover during fabrication process was measured by 3-dimensional measuring instrument. From the results, the principal factor controlling the global bending distortion was identified as the bending moment associated with the longitudinal shrinkage force and transverse shrinkage caused by welding and flame heating and the change of the centroid axis of hatch-cover in each fabrication process. Therefore, in this study, with the predictive equations of the longitudinal shrinkage force and transverse shrinkage caused by welding and flame heating and the simplified thermo elastic method, the predictive method for the global bending distortion was established and verified by comparing with the measured result. Based on the results, the amount of reverse bending distortion of main stiffeners was determined to prevent the global bending distortion of hatch-cover.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.10a
• /
• pp.420-425
• /
• 2003

Generally, reverse engineering means getting CAD data from unidentified shape using vision or 3D laser scanner system. In this paper, we studied unidentified model by machine vision based reverse engineering system to get information about in-processing model. Recently, vision technology is widely used in current factories, because it could inspect the in-process object easily, quickly, accurately. The following tasks were mainly investigated and implemented. We obtained more precise data by corning camera's distortion, compensating slit-beam error and revising acquired image. Much more, we made similar curves or surface with B-spline approximation for precision. Until now, there have been many case study of shape recognition. But it was uncompatible to apply to the field, because it had taken too many processing time and has frequent recognition failure. This paper propose recognition algorithm that prevent such errors and give applications to the field.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.5 no.2
• /
• pp.145-151
• /
• 2010

This paper proposes a reverse filtering system of sound field obtaining a state of sound field transmitted from two sounds, using an adaptive filter and neural network. The proposed system uses the reverse filtering method with calculating and renewing a coefficient of a filter, using least mean square. Based on training the neural network, experiments confirm that the proposed system is effective for a simple waveform with non-linear distortion, by using neural network and adaptive filtering method.

• Korean Journal of Remote Sensing
• /
• v.19 no.6
• /
• pp.431-445
• /
• 2003

In this paper, we experimentally investigated the precision of 3D positioning using 4S-Van images in photograrmmetric perspective. The 3D calibration target was built over building facade outside and was captured separately by two CCD cameras installed in 4S-Van. After then, we determined the interior orientation parameter for each CCD camera through self-calibration technique. With the interior orientation parameter computed, the bundle adjustment was performed to obtain the exterior orientation parameters simultaneously for two CCD cameras using calibration target image and object coordinates. The reverse lens distortion coefficients were computed and acquired by least squares method so as to introduce lens distortion into epipolar line. It was shown that the reverse lens distortion coefficients could transform image coordinates into lens distorted image coordinates within about 0.5 pixel. The proposed semi-automatic matching scheme incorporated with lens distorted epipolar line was implemented with scene images captured by 4S-Van in moving. The experimental results showed that the precision of 3D positioning from 4S-Van images in photograrmmetric perspective is within 2cm in the range of 20m from the camera.

• Archives of Plastic Surgery
• /
• v.49 no.3
• /
• pp.423-426
• /
• 2022

Reconstruction of the upper lateral lip subunit is challenging, and use of several classical local flaps have been previously reported. However, these methods have drawbacks such as visible scarring, anatomic distortion, and functional disability. To obtain satisfactory results, preservation of perioral function is important. We report a case of functional upper lip reconstruction after tumor resection using a reverse facial-submental artery island flap with a reinnervated anterior belly of the digastric muscle (ABDM) without sacrificing the perioral structure. A 73-year-old man presented with basal cell carcinoma on the left upper lip which was widely excised, including the orbicularis oris muscle. The remaining 4 cm × 3.5 cm defect was reconstructed using a reverse facial-submental artery island flap with ipsilateral ABDM. The motor nerve of the ABDM was sutured with the stump of the buccal branch of the ipsilateral facial nerve. The postoperative course was uneventful, and good functional and esthetic recovery were observed at 12-month follow-up. This procedure may be an alternative option for reconstruction of lateral upper lip defects.

• Journal of the Society of Naval Architects of Korea
• /
• v.53 no.4
• /
• pp.275-281
• /
• 2016

One of the most important things for quality to meet ship-production schedule is an accuracy control. A ship is assembled by welding through whole production process, so it is important that loss by correction will not happen as much as possible by using some engineering skills like reverse design, reverse setting and margin for thermal shrinkage. These efforts are a quite effective in fabrication stages, but not in erection stages. If a ship block which consists of common steel is exposed to directional solar radiation, its dimensional accuracy will change high as time by its thermal expansion coefficient. Therefore, the measuring work would be often done at dawn or evening even with having a very accurate device. In this study, an FE analysis method is developed to solve this problem. It can change measured data affected by solar thermal distortion to ones not, even though ship-block is measured at an arbitrary time. It will use the time when measuring, the direction of block and the weather record by satellites. It is confirmed by a comparison between measured data of a ship-block and the result by suggested analysis method. Furthermore, a pre-processing system is also developed for fast application of the suggested analysis method.