• 제목/요약/키워드: Reverse Diffusion

검색결과 95건 처리시간 0.023초

난류확산화염의 화염구조와 연소특성에 관한 실험적 연구 (An Experimental Study on Flame Structure and Combustion Characteristics of Turbulent Diffusion Flame(III))

  • 장인갑;최경민;최병륜
    • 대한기계학회논문집B
    • /
    • 제20권7호
    • /
    • pp.2326-2336
    • /
    • 1996
  • So most practical combustor is considered to the swirl flame, it is very important to examinate swirl flame structure and combustion characteristics. Recently, attention has been paid to the flame diagnostic by radical luminous intensity. For swirl flame structure and combustion characteristic, reverse flow boundary, temperature, ion current and radical luminous intensity were measured in the double-coaxial swirl combustor which was used principle of multi-annular combustor. This study had three experimental condition, S-type, C-type, SC-type. S-type and C-type flames were formed recirculation zone, but SC-type flame wasn't formed. C-type flame had two recirculation zone. The position with maximum value of ion current and CH-radical, temperature and OH-radical had similarity distribution almost. Therefore, it is possible that the macro structure of flame was measured by radical luminous intensity in the high intensity of turbulent combustion field which was formed by swirl.

이중선회류중의 난류확산화염의 안정화에 관한 연구 (A study on the stability of turbulent diffusion flame in double swirl flows)

  • 조용대;최병륜
    • 대한기계학회논문집
    • /
    • 제14권6호
    • /
    • pp.1669-1678
    • /
    • 1990
  • 본 연구에서는 다중선회연소기의 원리에 기초하여 연료와 산화제의 접촉면적 및 혼합속도를 증가시킴으로써 연소부하의 증대 및 연소효율의 향상효과를 얻을 수 있 는 새로운 연소방식을 개발하기 위한 시도로서 속도차가 있는 동축의 두 공기분류 사 이의 전단층에 기체연료를 분출시켜서 형성되는 난류확산 화염에 관하여 유동장의 성 상이 화염안정한계 및 화염구조에 미치는 영향을 조사하여 실용연소기의 유도장제어 및 고부하연소기설계를 위한 기초자료를 얻는데 목적이 있다.

Renewable energy powered membrane systems: inorganic contaminant removal from Australian groundwaters

  • Richards, Laura A.;Richards, Bryce S.;Schafer, Andrea I.
    • Membrane and Water Treatment
    • /
    • 제2권4호
    • /
    • pp.239-250
    • /
    • 2011
  • A photovoltaic powered ultrafiltration and reverse osmosis system was tested with a number of natural groundwaters in Australia. The objective of this study was to compare system performance at six remote field locations by assessing the impact of water composition and fluctuating energy on inorganic contaminant removal using a BW30-4040 membrane. Solar irradiance directly affected pressure and flow. Groundwater characteristics (including TDS, salts, heavy metals, and pH), impacted other performance parameters such as retention, specific energy consumption and flux. During continual system operation, retention of ions such as $Ca^{2+}$ and $Mg^{2+}$ was high (> 95%) with each groundwater which can be attributed to steric exclusion. The retention of smaller ions such as $NO_3{^-}$ was affected by weather conditions and groundwater composition, as convection/diffusion dominate retention. When solar irradiance was insufficient or fluctuations too great for system operation, performance deteriorated and retention dropped significantly (< 30% at Ti Tree). Groundwater pH affected flux and retention of smaller ions ($NO_3{^-}$ and $F^-$) because charge repulsion increases with pH. The results highlight variations in system performance (ion retention, flux, specific energy consumption) with real solar irradiance, groundwater composition, and pH conditions.

Image Encryption Based on Quadruple Encryption using Henon and Circle Chaotic Maps

  • Hanchinamani, Gururaj;Kulkarni, Linganagouda
    • Journal of Multimedia Information System
    • /
    • 제2권2호
    • /
    • pp.193-206
    • /
    • 2015
  • In this paper a new approach for image encryption based on quadruple encryption with dual chaotic maps is proposed. The encryption process is performed with quadruple encryption by invoking the encrypt and decrypt routines with different keys in the sequence EDEE. The decryption process is performed in the reverse direction DDED. The key generation for the quadruple encryption is achieved with a 1D Circle map. The chaotic values for the encrypt and decrypt routines are generated by using a 2D Henon map. The Encrypt routine E is composed of three stages i.e. permutation, pixel value rotation and diffusion. The permutation is achieved by: row and column scrambling with chaotic values, exchanging the lower and the upper principal and secondary diagonal elements based on the chaotic values. The second stage circularly rotates all the pixel values based on the chaotic values. The last stage performs the diffusion in two directions (forward and backward) with two previously diffused pixels and two chaotic values. The security and performance of the proposed scheme are assessed thoroughly by using the key space, statistical, differential, entropy and performance analysis. The proposed scheme is computationally fast with security intact.

냉방과 난방 부하 감소를 위한 지하피트의 이용 가능성 (The Possibility on Utilization of Underground Pit for Reduction of Cooling and Heating Load)

  • 조성우
    • 설비공학논문집
    • /
    • 제18권2호
    • /
    • pp.144-150
    • /
    • 2006
  • The purpose of this study is to predict outlet temperature and humidity through underground pit for the reduction of cooling load and heating load. Commonly, the underground temperature is lower than outdoor in summer but the reverse happens in winter. When the outdoor average air temperature is $25.7^{\circ}C$ during cooling periods, the average outlet air temperature through underground pit is $23.6^{\circ}C$ with 3 m-depth and 60m-length and is $22.2^{\circ}C$ with 3 m-depth and 150 m-length. When the outdoor average air temperature is $4.9^{\circ}C$ during heating periods, the average outlet air temperature through underground pit is $7.7^{\circ}C$ with 3m-depth and 60 m-length and is $10.8^{\circ}C$ with 3 m-depth and 150 m-length. The outlet air temperature is affected by more length than depth of underground pit. The diffusion ratio of outdoor humidity is $-7.7\times10^{-8}kg/s$ in cooling periods and $9.29\times10^{-7}kg/s$ in heating periods.

4~8%Mn 열연 TRIP강의 잔류오스테나이트 생성과 기계적 성질 (Formation of Retainted Austenite and Mechanical Properties of 4~8%Mn Hot Rolled TRIP Steels)

  • 김동은;박영구;이오연;진광근;김성주
    • 한국재료학회지
    • /
    • 제15권2호
    • /
    • pp.115-120
    • /
    • 2005
  • The aim of this research is to develop the TRIP aided high strength low carbon steels using reverse transformation process. The $4\~8\%$ Mn steel sheets were reversely transformed by slow heating to intercritical temperature region and furnace cooling to room temperature. The stability of retained austenite depends on the enrichment of carbon and manganese by diffusion during the reverse transformation. The amount of retained austenite formed after reversely transformed at $625^{\circ}C$ for 6 hrs was about $50\;vol.\%$ in the $8\%Mn$ steel. The change in volume fraction of retained austenite with a holding temperature was consistent with the changes in elongation and the strength-ductility combination. The maximum strength-ductility combination of 40,000 $MPa{\cdot}\%$ was obtained when the $8\%Mn$ steel reversely transformed at $625^{\circ}C$ for 12 hrs. However, it's property was significantly decreased at higher holding temperature of $675^{\circ}C$ resulting from the decrease of ductility.

전류인가 방법이 3D-SiP용 Through Via Hole의 Filling에 미치는 영향 (The Effects of Current Types on Through Via Hole Filling for 3D-SiP Application)

  • 장근호;이재호
    • 마이크로전자및패키징학회지
    • /
    • 제13권4호
    • /
    • pp.45-50
    • /
    • 2006
  • 3D package의 SiP에서 구리의 via filling은 매우 중요한 사항으로 package밀도가 높아짐에 따라 via의 크기가 줄어들며 전기도금법을 이용한 via filling이 연구되어왔다. Via filling시 via 내부에 결함이 발생하기 쉬운데 전해액 내에 억제제, 가속제등 첨가제를 첨가하고 펄스-역펄스(PRC)의 전류파형을 인가하여 결함이 없는 via의 filling이 가능하다. 본 연구에서는 건식 식각 방법 중 하나인 DRIE법을 이용하여 깊이 $100{\sim}190\;{\mu}m$, 직경이 각각 $50{\mu}m,\;20{\mu}m$인 2가지 형태의 via을 형성하였다. DRIE로 via가 형성된 Si wafer위에 IMP System으로 Cu의 Si으로 확산을 막기 위한 Ta층과 전해도금의 씨앗층인 Cu층을 형성하였다. Via시편은 직류, 펄스-역펄스의 전류 파형과 억제제, 가속제, 억제제의 첨가제를 모두 사용하여 filling을 시도하였고, 공정 후 via의 단면을 경면 가공하여 SEM으로 관찰하였다.

  • PDF

0.14C-6.5Mn TRIP강의 기계적 성질에 미치는 제조공정의 영향 (Effect of Fabrication Processes on the Mechanical Properties of 0.14C-6.5Mn TRIP Steels)

  • 이오연;류성일
    • 한국재료학회지
    • /
    • 제11권5호
    • /
    • pp.431-437
    • /
    • 2001
  • 본 연구는 제조공정을 달리한 0.14C-6.5Mn강을 2상영역에서 역변태처리 하였을 때 다량의 잔류오스테나이트를 생성시키기 위한 열처리 조건을 제시하고 잔류오스테나이트의 생성과 관련하여 미세조직 관찰, C, Mn의 분배거동 및 기계적성질을 조사하였다. 잔류오스테나이트는 역변태처리시 오스테나이트내에 C, Mn의 확산으로 농축되어 안정화되며 연성향상에 크게 기여한다. 30%이상의 잔류오스테나이트를 확보하기 위해서는 6457에서 역변태처리하는 것이 효과적이지만, 잔류오스테나이트의 부피 분율과 기계적안정성을 고려하면 $620^{\circ}C$에서 열처리하는 것이 바람직하다. 냉연재의 강도.연성조합값은 3강종 모두 $620^{\circ}C$에서 1시간 역변태처리한 경우 4000kg/$\textrm{mm}^2$정도로 매우 우수하지만 고온에서는 연성감소로 인하여 그 값이 현저하게 저하하였다. 0.14C-6.5Mn계 TRIP강에서 잔류오스테나이트 생성과 기계적성질에 미치는 1.1%Si 첨가효과는 매우 미약하였다.

  • PDF

펄스-역펄스 전착법을 이용한 SiP용 via의 구리 충진에 관한 연구 (Electroplating of Copper Using Pulse-Reverse Electroplating Method for SiP Via Filling)

  • 배진수;장근호;이재호
    • 마이크로전자및패키징학회지
    • /
    • 제12권2호
    • /
    • pp.129-134
    • /
    • 2005
  • SiP의 3D패키지에 있어서 구리도금은 매우 중요한 역할을 한다 이러한 구리 도금의 조건을 알아보기 위하여 조건이 다른 전해질에서 전기화학적 I-V특성을 분석하였다. 첨가제로 억제제와 촉진제의 특성을 분석하였다. 3D 패키지에 있어서 직경 50, 75, $100{\mu}m$의 via를 사용하였다. Via의 높이는 $100{\mu}m$로 동일하였다. Via의 내부는 확산방지층으로 Ta을 전도성 씨앗층으로 Cu를 magnetron 스퍼터링 방법으로 도포하였다. 직류, 펄스, 펄스-역펄스 등 전류의 파형을 변화시키면서 구리 도금을 하였다. 직류만 사용하였을 경우에는 결함 없이 via가 채워지지 않았으며 펄스도금을 한 경우 구리 충진이 개선을 되었으나 결함이 발생하였다. 펄스-역펄스를 사용한 경우 결함 없는 구리 충진층을 얻을 수 있었다.

  • PDF

폴리아미드 역삼투막을 이용한 염화나트륨, 아세트산나트륨, 구연산나트륨 용액의 농축 (Concentration of Sodium Chloride, Sodium Acetate and Sodium Citrate Solutions by using Polyamide Reverse Osmosis Membrane)

  • 이흥길;김인호
    • Korean Chemical Engineering Research
    • /
    • 제56권5호
    • /
    • pp.679-686
    • /
    • 2018
  • 폴리아미드 역삼투막을 이용하여 염화나트륨, 아세트산나트륨, 구연산나트륨 용액의 역삼투 농축실험을 행하고, 농도분극 현상을 압력, 용질의 종류, 농축액의 초기 농도를 변수로 연구하였다. 투과 플럭스에 대한 압력과 농도의 영향을 살펴보면, 공정 압력이 증가할수록 그리고 원액의 초기 농도가 작을수록 투과플럭스가 증가하였다. 농도분극이 일어나면 막 표면의 농도가 증가하여 투과플럭스가 감소한다. 농도분극은 농축이 진행됨에 따라 투과 플럭스의 감소로 이어지고 농도분극 층에서 용질 역확산을 통하여 점차 감소하였다. 이온의 크기, 분자량, 전하량이 증가함에 따라 막표면에서 정전기적 반발력이 커서 농도분극의 이론적 해석과 실험값의 차이가 컸다.