• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2005.10a
• /
• pp.209-210
• /
• 2005

This research aims at proposing new space design model with eco-friendly material, paper, for sustainable life mode. As pro-natural paper which is feasible for secondary processing in interior design, it's significance lies in its easy adaptability to nature and depreciation of environment pollution. The target space which needs alterability is designed with corrugated paper as its eco-friendly and changeable features as corrugated paper made out of wood pulp would return to nature after decomposition. If the material will be recycling, reuseable, and renewable which are eco-friendly and durable, then sustainable space design would be created.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.4
• /
• pp.953-959
• /
• 2015

The global warming caused by consumption of fossil fuel and energy has been interested. Therefore, several policies and regulations have been discussed to reduce greenhouse gas emission and effective energy consumption. The construction industry that takes 45% of energy consumption makes efforts to develop green construction methods and materials and reuseable energy. However, there is no common definition to calculate greenhouse gas and database in the construction industry. Especially, transportation infrastructure like road, railway, harbor, and airport consumes 21% energy of construction facilities. Therefore, this paper develops the causal relationship to define performance of sustainable road construction and maintenance. The performance indices are grouped into economic, social, and envirionmental impacts. Then, the causal map is developed based on survey results of construction experts. This will provide the baseline to evaluate the performance of sustainable construction and to establish the objective goals.

• Journal of Environmental Science International
• /
• v.24 no.9
• /
• pp.1221-1231
• /
• 2015

The present study was conducted to find a way to recycle the coir substrate by investigating changes in its physical and chemical properties based on the number of use year. Specific gravity of unused coir substrate was $0.212g/cm^3$, while it was higher for the substrate used for 2 years. Porosity was different depending on the number of use year. The porosity of unused substrate was 51.9%, but it increased to 68.6% after used for 2 years. In general, physical and chemical properties were better in the coir substrate used for 2 years than in unused one. The number of leaves, leaf area, flesh weight and dry weight of oriental cabbage and lettuce were higher in coir substrate used for 2 years than those in unused one. Whereas, no significant difference was observed between the substrates used for one year and 2 years, indicating that the one time-used wast substrate could be recycled for cultivating vegetables. Growth of the vegetables was improved when organic fertilizer composed of complex organics with different mixing ratios was provided to the coir substrate, compared to untreated plot. The optimum mixing ratio of the wast substrate and complex organics was 2:8(v/v) for fertilization using wast coir substrate. Therefore, coir substrate generally wasted after being used for one time was reuseable by supplying organic fertilizer.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.114.1-114.1
• /
• 2011

Bioenergy production from lignocellulosic biomass and agriculture wastes have been attracted because of its sustainable and non-edible source. Especially, canola is considered as one of the best feedstock for renewable fuel production. Oil extracted canola and its agriculture residues are reuseable for bioethanol production. However, a pretreatment step is required before enzymatic hydrolysis to disrupt recalcitrant lignocellulosic matrix. To increase the sugar conversion, more efficient pretreatment process was necessary for removal of saccharification barriers such as lignin. Alkaline pretreatment makes the lignocellulose swollen through solvation and induces more porous structure for enzyme access. In our previous work, aqueous ammonia (1~20%) was utilized for alkaline reagent to increase the crystallinity of canola residues pretreatment. In this study, significant factors for efficient soaking in aqueous ammonia pretreatment on canola residues was optimized by using the response surface method (RSM). Based on the fundamental experiments, the real values of factors at the center (0) were determined as follows; $70^{\circ}C$ of temperature, 17.5% of ammonia concentration and 18 h of reaction time in the experiment design using central composition design (CCD). A statistical model predicted that the highest removal yield of lignin was 54% at the following optimized reaction conditions: $72.68^{\circ}C$ of temperature, 18.30% of ammonia concentration and 18.30 h of reaction time. Finally, maximum theoretical yields of soaking in aqueous ammonia pretreatment were 42.23% of glucose and 22.68% of xylose.

• Journal of Internet Computing and Services
• /
• v.6 no.2
• /
• pp.1-11
• /
• 2005

Web services are being recognized as the efficient way to integrate the distributed applications on the web based on the web standards such as SOAP, WSDL and UDDI. Recently, BPEL4WS is suggested as a standard integration model language for web services to integrate them efficiently. The recent studies of web service integration are focused on the comparability among the services, process identification and tracing, and automation, However, little or no effort has been dedicated to the reusability, extensibility on the business process integrated services and how to allocate the services dynamically, So, in this paper, we propose how to increase the reusability and extensibility of integrated structure when services are integrated using BPEL4WS, and how to allocate and use the services dynamically. Also, we propose the framework of the composition of web services for the efficient use of suggested integrated structure.

• Journal of architectural history
• /
• v.23 no.1
• /
• pp.7-19
• /
• 2014

This study considers the proper repair techniques by examining the most representative repair cases of the Korean arch bridges and proposes the constructional manual which can apply similar occasions. The cases are Seonamsa Seungseongyo and Songgwangsa Geukrockgyo where this researcher had taken part in the repair works. This Study proposes the maintenance construction manual about the performance degradation drew by performance degradation of the both Korean arch bridges in the maintenance process. First, arch bridge maintenance should be carried out in the dry season, when water is impermeable in the bottom surface of the bridge. Moreover, risk factors of the maintenance should be excluded to secure the water vally flow, the bypass and the temporary bridge. Second, prior to repair, it has to precede (1)3D shooting (2)formal examination (3)structure safety test (4)geological and lithic surveys (5)arch curvature establishment and makeshift frame settlement before transformation (6)relationship expert comments. Third, if the baduk and the foundation stones are inevitable to replace due to performance degradation on the foundation, it should use the high quality stones and secure greater stress by extending the standard range. The foundation on irregular rock needs to be flattened and underside on the replaced materials require Grengyijil to deliver the equal loads. Fourth, In the process of dismantling the stones of the arched bridge, it could make heavy weathering degree and not reuse the materials. Charge should converge the expert advices to choose the reuseable, the conservate and the alternative materials, and increase the reutilization of the raw materials by preservation and reinforcement treatments. Fifth, the side wall should be repaired by the rubble work technique which is not able to pile compost satiety, so it must use long depth of masonary stones for reinforcement. It is considered to reinforce the stone wall in shore as much as possible and protect the abutment and the side wall on the upstream for the arch bridge maintenance works.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.560-560
• /
• 2015

우리나라 연평균 수자원 총량은 1,297억톤이고 이용가능한 수자원량은 58%(753억톤)이며, 이 중 바다로 유실되는 32%(420톤)를 제외하고 연간 26%(333억톤)을 이용하고 있다. 용도별로 보면 생활용수 75억톤, 공업용수 21억톤, 농업용수 159억톤 및 유지용수 78억톤 등으로 사용되며 농업용수가 약 48%로 가장 많은 양이 차지하고 있다. 농업용수는 국내 수자원 소비량 중 가장 많은 양을 차지하고 있으나, 주기적인 가뭄에 따른 용수 부족이 매년 심각한 문제로 대두되고 있는 실정이며, 이에 대한 대책으로 저수지 준설, 둑 높이기, 다단계 양수장 건설 등을 통한 저수량 확보 사업이 진행되고 있으나 준설 및 둑 높이기시 막대한 사업비와 양수장 조성 공간 부족 등으로 농업용수 확보에 어려움이 발생하고 있다. 국내에서는 수자원 개발 및 친수공간 조성을 목적으로 매년 1,000여건의 하천공사가 실시되고 있으며, 하천공사로 인해 가물막이의 설치 및 해체가 계속적으로 발생하고 있다. 하천공사시 가물막이 설치를 위해 중장비의 출입 반드시 필요하나 중장비 출입이 어려운 지역에서는 공사기간 지연 및 경제성 등의 문제로 어려움을 겪고 있는 실정이다. 이에, 본 연구에서는 휴대용 차수막의 구조개선을 통해 (1) 저수지 증고 및 하천 가물막이에 적합한 설계 및 설치 방법을 개발하고, (2) 수압 및 부유물질에 안전하도록 강도를 개선하였으며, (3) 내구성, 경제성, 유지관리성이 개선된 재이용이 가능한 휴대용 차수막을 개발하였다. 휴대용 차수막 개발로 인해 저수지 증고 및 하천 가물막이 뿐만 아니라 방재 및 레크레이션용도 등 다목적 활용이 높은 것으로 나타나 수자원 분야에 다수 적용될 것으로 기대된다.

• The KIPS Transactions:PartD
• /
• v.12D no.4 s.100
• /
• pp.589-600
• /
• 2005

Application developers need effective reuseable methodology to meet rapidly changes and variety of users requirements. Product Line and CBD(Component Based Development) offer the great benefits on quality and productivity for developing the software that is mainly associate with reusable architectures and components in a specific domain and rapidly changing environments. Product line can dynamically focus on the commonality and variety feature model among the products. The product line uses the feature modeling for discovering, analyzing, and mediating interactions between products. Reusable architectures include many variety plans and mechanisms. In case of those architecture are use in product version for a long time, It is very important in architecture product line context for product line design phase. Application developer need to identify the proper location of architecture changing for variety expression. It is lack of specific variety managements to design the product line architecture until nowdays. In this paper, we define various variety types to identify the proper location of architecture changing for variety expression and to design the reusable architecture. We also propose architecture variety on feature model and describe variety expression on component relations. We implemented the web learning system based on the methodology. We finally describe how these methodology may assist in increasing the efficiency, reusability, productivity and quality to develop an application. In the future, we are going to apply the methodology into various domain and suggest international and domestic's standardization.

• Journal of Korea Spatial Information System Society
• /
• v.8 no.1 s.16
• /
• pp.1-16
• /
• 2006

Recently, human based computing environment for supporting users to concentrate only user task without sensing other changes from users is being progressively researched and developed. But middleware deletes steream data processed for reducing process load of massive information from RFID sensor in this computing. So, this kind of middleware have problems when user demands probability or statistics needed for data warehousing or data mining and when user demands very important stream data repeatedly but already discarded in the middleware every former time. In this paper, we designs Sensor Middleware Architecture on Multi Level Spatial DBMS with Snapshot and manage repeatedly required stream datas to solve reusing problems of historical stream data in current middleware. This system uses disk databse that manages historical stream datas filtered in middleware for requiring services using historical stream information as data mining or data warehousing from user, and uses memory database that mamages highly reuseable data as a snapshot when stream data storaged in disk database has high reuse frequency from user. For the more, this system processes memory database management policy in a cycle to maintain high reusement and rapid service for users. Our paper system solves problems of repeated requirement of stream datas, or a policy decision service using historical stream data of current middleware. Also offers variant and rapid data services maintaining high data reusement of main memory snapshot datas.

• Korean Journal of Clinical Laboratory Science
• /
• v.37 no.3
• /
• pp.178-184
• /
• 2005

Carry over contamination has been reduced in some systems by flushing the internal and external surfaces of the sample probe with copious amount of diluent. It between specimens should be kept as small as possible. A built-in, continuous-flow wash reservoir, which allows the simultaneous washing of the interior and exterior of the syringe needles, addresses this issue. In addition, residual contamination can further be prevented through the use of efficient needle rinsing procedures. In discrete systems with disposable reaction vessels and measuring cuvets, any carry over is entirely caused by the pipetting system. In analyzers with reuseable cuvets or flow cells, carry over may arise at every point through which high samples pass sequentially. Therefore, disposable sample probe tips can eliminate both the contamination of one sample by another inside the probe and the carry over of in specimen into the specimen in the cup. The results of the applicative carry over experiment studied on 21 items for total protein (TP), albumin (ALB), total bilirubin (TB), alkaline phosphatase (ALP), aspratate aminotranferase (AST), alanine aminotranferase (ALT), gamma glutamyl transferase (GGT), creatinine kinase (CK), lactic dehydrogenase (LD), creatnine (CRE), blood urea nitrogen (BUN), uric acid (UA), total cholesterol (TC), triglyceride (TG), glucose (GLU), amylase (AMY), calcium (CA), inorganic phosphorus (IP), sodium (Na), potassium (K), chloride (CL) tests in chematology were as follows. Evaluation of process performance less than 1% in all tests was very good, but a percentage of ALB, TP, TB, ALP, CRE, UA, TC, GLU, AMY, IP, K, Na, and CL was 0%, implying no carry over. Other tests were ALT(-0.08%), GGT(-0.09%), CK(0.08%), LD(0.06%), BUN(0.12%), TG (-0.06%), and CA(0.89%).