• Journal of the Semiconductor & Display Technology
• /
• v.21 no.4
• /
• pp.86-91
• /
• 2022

Cache bypassing is a scheme to prevent unnecessary cache blocks from occupying the capacity of the cache for avoiding cache contamination. This method is introduced to alleviate the problems of non-volatile memories (NVMs)-based memory system. However, the prior works have been studied without considering wear-out attack. Malicious writing to a small area in NVMs leads to the failure of the system due to the limited write endurance of NVMs. This paper proposes a novel scheme to prolong the lifetime with higher resistance for the wear-out attack. First, the memory reference pattern is found by modified reuse distance calculation for each cache block. If a cache block is determined as the target of the attack, it is forwarded to higher level cache or main memory without updating the NVM-based cache. The experimental results show that the write endurance is improved by 14% on average and 36% on maximum.

• The KIPS Transactions:PartA
• /
• v.9A no.1
• /
• pp.121-128
• /
• 2002

Web-based teaching-learning systems through the internet has continuously pursued the learner-centered educational environment by promoting the interaction between leachers and students. As a result, learners haute become free of the limit of time and space and have more ways to have access to education information more easily. Consequently, the development of the internet has resulted in the changes of the educational environment. Web-based distance education through the internet is now expected to be applied widely in various fields of education. In fact, distance education through the internet has taken place in a new education paradigm. The purpose of this paper is to promote the economical and educational efficiency of all the procedures from developing the system to operating in a remote training cyber system. Therefore in developing the system, we designed it to raise the efficiency by making main modulo into components and by reducing the terms and cost by reuse. Also lute meant to raise the efficiency of education by applying constructivism as an educational basic.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.12
• /
• pp.1201-1208
• /
• 2016

Radio Frequency Identification (RFID) technology has a significant attraction throughout various industry sites, along with the development of wireless communication technologies. The typical applications of RFID include medical, logistics, and distribution, and, specially, it is effectively applied to non-contact environments, because it employs radio waves. Although, recently, construction cases of the RFID management systems for the inventory management of the construction materials have been increased, the related researches and experiments for the reused materials are not actively performed. In this paper, we propose the RFID system with the localization function for effectively managing the reuse of the construction materials, adding to the conventional inventory management system. The proposed system consists of a RFID reader unit and a receiver unit, and the location information of the material with the attached RFID tag is obtained by estimating the position of a RFID reader. The distance value for estimating the reader position is calculated using the Received Signal Strength Indicator (RSSI) value of Zigbee, and the performance evaluation of the proposed system is performed in the indoor space of $5m{\times}5m$.

• The KIPS Transactions:PartA
• /
• v.8A no.3
• /
• pp.279-286
• /
• 2001

This paper proposes a low power resource allocation and scheduling algorithm that minimized power consumption such as DSP circuit in high-level synthesis process. In this paper, we have used list-scheduling method for low power design in scheduling step. Also, it increase possibility to reuse input through resource sharing when assign resource. After scheduling, the resources allocation uses the power function in consideration of the result of calculating average hamming distances and switching activity between two input. First, it obtain switching activity about input value after calculate average hamming distances between two operator and find power value make use of bit pattern of the input value. Resource allocation process assign operator to minimize average hamming distance and power dissipation on all occasions which is allocated at each control step according to increase control step. As comparing the existed method, the execution time becomes fast according to number of operator and be most numberous control step. And in case of power that consume, there is decrease effect from 6% to 8% to be small.

• Journal of Advanced Navigation Technology
• /
• v.21 no.4
• /
• pp.359-364
• /
• 2017

Since the existing analog village broadcasting system has some technical problems in applying and degradations in performance due to its old equipments, it had been required recently to be changed to a wireless digital system and to develop the standardization. However, it is important to analyze the interference between villages in deploying the efficient digital wireless village broadcasting system. In this paper, simulations for co-channel and adjacent channel interference have been carried out considering digital private mobile radio(dPMR) and digital mobile radio(DMR) systems as a representative mobile radio. These results for frequency reuse and channel separation drawn from the separation distance between villages in co-channel interference and the frequency offset in adjacent interference can be helpful to establish a standard and the testing service in the near future.

• Journal of Computing Science and Engineering
• /
• v.9 no.2
• /
• pp.83-97
• /
• 2015

IEEE 802.15.4 is a global standard designed for emerging applications in low-rate wireless personal area networks (LR-WPANs). The standard provides beneficial features, such as a beacon-enabled mode and guaranteed time slots for realtime data delivery. However, how to optimally operate those features is still an open issue. For the optimal operation of the features, this paper proposes a holistic optimization method that jointly optimizes three cross-related problems: cluster-tree construction, nodes' power configuration, and duty-cycle scheduling. Our holistic optimization method provides a solution for those problems so that all the real-time packets can be delivered within their deadlines in the most energy-efficient way. Our simulation study shows that compared to existing methods, our holistic optimization can guarantee the on-time delivery of all real-time packets while significantly saving energy, consequently, significantly increasing the lifetime of the network. Furthermore, we show that our holistic optimization can be extended to take advantage of the spatial reuse of a radio frequency resource among long distance nodes and, hence, significantly increase the entire network capacity.

• The KIPS Transactions:PartD
• /
• v.11D no.7 s.96
• /
• pp.1443-1450
• /
• 2004

The clustering characteristics for a number of classes, and defining the inheritance relations between the classes is a difficult and complex problem in an early stage of object oriented software development. We discuss a traditional iterative approach for the reuse of the existing classes in a library and an integrated approach to creating a number of new classes presented in this study. This paper formulates a character-istic clustering problem for zero-one integer programming and presents a network solution method with illustrative examples and the basic rules to define the inheritance relations between the classes. The network solution method for a characteristic clustering problem is based on a distance parameter between every pair of objects with characteristics. We apply the approach to a real problem taken from industry.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.1
• /
• pp.364-369
• /
• 2012

Location information is a critical element of ubiquitous computing. Cricket is an indoor location-based system that transmits radio and ultrasonic signals in regular intervals to calculate the distance between nodes. However, the amount of signal interference and collisions increases in proportion with the number of nodes, losing the accuracy of the location-based system. This study proposes an algorithm based on the 802.15.2 MAC protocol for the wireless sensor network to reduce signal interference and collision by employing node numbers and the frequency reuse approach used in mobile telecommunication. We analyzed the performance of our algorithm. The obtained results showed that the algorithm is an effective for throughput and energy compared to the Cricket system.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.4
• /
• pp.1424-1441
• /
• 2014

Two-tier femtocell networks, consisting of a conventional cellular network underlaid with femtocell hotspots, play an important role in the indoor coverage and capacity of cellular networks. However, the cross- and co-tier interference will cause an unacceptable quality of service (QoS) for users with universal frequency reuse. In this paper, we propose a novel downlink interference mitigation strategy for spectrum-shared two-tier femtocell networks. The proposed solution is composed of three parts. The first is femtocells clustering, which maximizes the distance between femtocells using the same slot resource to mitigate co-tier interference. The second is to assign macrocell users (MUEs) to clusters by max-min criterion, by which each MUE can avoid using the same resource as the nearest femtocell. The third is a novel adaptive power control scheme with femtocells downlink transmit power adjusted adaptively based on the signal to interference plus noise ratio (SINR) level of neighboring users. Simulation results show that the proposed scheme can effectively increase the successful transmission ratio and ergodic capacity of femtocells, while guaranteeing QoS of the macrocell.

• IE interfaces
• /
• v.22 no.2
• /
• pp.153-164
• /
• 2009

An effective management for reverse flows of products such as reuse, repair and disposal, has become an important issue for every aspect of business. In this paper, we study the Location-Routing Problem (LRP) in the multi-stage closed-loop supply chain network. The closed-loop supply chain in this study integrated both forward and reverse flows. In forward flow, a factory, Distribution Center (DC) and retailer are considered as usual. Additionally in reverse flow, we consider the Central Returns collection Center (CRC) and disposal facility. We propose a mixed integer programming model for the design of closed-loop supply chain integrating both forward and reverse flows. Since the LRP belongs to an NP-hard problem, we suggest a heuristic algorithm based on genetic algorithm. For some test problems, we found the optimal locations and routes by changing the numbers of retailers and facility candidates. Furthermore, we compare the efficiencies between open-loop and closed-loop supply chain networks. The results show that the closed-loop design is better than the open one in respect to the total routing distance and cost. This phenomenon enlarges the cut down effect on cost as an experimental space become larger.