• Title/Summary/Keyword: Retention loss

Search Result 328, Processing Time 0.031 seconds

Improvement of Properties in High Strength Concrete Using Fly ash and Gypsum (플라이 애시 및 석고를 활용한 고강도용 콘크리트의 성능개선)

  • 김기형;최재진;최연황
    • Proceedings of the Korea Concrete Institute Conference
    • /
    • 1999.04a
    • /
    • pp.89-94
    • /
    • 1999
  • The workability of high strength concrete using high range water reducing admixture is varied rapidly according to elapsed time. For using the high strength concrete in situ, careful caution on workability is necessary. By using fly ash as a admixture, the slump loss of concrete can be reduced considerably, but the early strength of concrete used fly ash is smaller than that not used fly ash. For the purpose of elevating the utilization of fly ash on high strength concrete, the high fluidity retention and the strength development in early age are necessary in concrete used fly ash. In this study, to improve the fluidity retention and to acquire strength development on concrete used fly ash, the gypsum is applied.

  • PDF

A Study on Product Liability Risk Financing Guidelines (제조물 책임 리스크 자금조달에 대한 일반적 지침 연구)

  • 이동하;오근태;김명수
    • Journal of Applied Reliability
    • /
    • v.2 no.2
    • /
    • pp.99-112
    • /
    • 2002
  • Risk financing is defined as the methods applied to fund risk treatment and the financial consequences of risk. It is a major component of the transfer of risk and the retention of risk which are, in turn, parts of the risk treatment process. This study applied the general guidelines on risk financing to product liability risk. Product liability risk occurs when potential defects in the process of design, production, and distribution lead to accidents resulting in fatal, financial, and environmental loss. Risk on product liability may be financed in many different ways, each of which may be used singularly or in combination. The most popular and recommendable way suggested in the guidelines is the retention or use of reserves, transfer, credit or insurance.

  • PDF

A Study on Polyester Fabric treated with Quarternary Ammonium Salt and Alkali (사급암모늄염/수산화나트륨용액에서 폴리에스테르 직물의 알칼리처리에 관한 연구)

  • 류효선
    • Journal of the Korean Home Economics Association
    • /
    • v.25 no.4
    • /
    • pp.9-18
    • /
    • 1987
  • This study is conducted to investigate the influence of addition of quarternary ammonium salt(cetyl trimethyl ammonium bromide: CTAB) when polyester(PET) fabric is treated with sodium hydroxide(NaOH), depending on experimental variables such as CTAB concentration, NaOH concentration, time & temperature, and the change in physical & chemical properties of alkaline-hydrolyzed PET fabrics depending on their weight loss. The results are as follows: 1. By adding CTAB in aqueous NaOH, the weight loss of PET fabric is increased remarkably and until the concentration of CTAB is reached at its cmc, and the higher the concentration of CTAB are, the more weight loss on PET fibrics are. 2. The addition of CTAB in aqueous NaOH is most effective at lower NaON concentration(2%) among various NaOH concentration, on increasing the amount of weight loss, while there are almost similar results through various treatment time and temperature. 3. As the amount of weight of weight loss on PET fabric is increased, the increase of void space in the PET yarn, of softness & dyeability of PET fabric and the decrease of tensile strength are found. On the other hand, the moisture regain shows a little increase by alkaline-hydrolysis on PET fabric while vertical absorption test & water retention value are not sufficiently sensitive to distinguish between the hydrophillicity of untreated and treated PET fabric. The shrinkage of PET fabric is induced by swelling in hot aqueous NaOH regardless of NaOH concentration & addition of CTAB.

  • PDF

Evaluation of alveolar bone loss following rapid maxillary expansion using cone-beam computed tomography

  • Baysal, Asli;Uysal, Tancan;Veli, Ilknur;Ozer, Torun;Karadede, Irfan;Hekimoglu, Seyit
    • The korean journal of orthodontics
    • /
    • v.43 no.2
    • /
    • pp.83-95
    • /
    • 2013
  • Objective: To evaluate the changes in cortical bone thickness, alveolar bone height, and the incidence of dehiscence and fenestration in the surrounding alveolar bone of posterior teeth after rapid maxillary expansion (RME) treatment using cone-beam computed tomography (CBCT). Methods: The CBCT records of 20 subjects (9 boys, mean age: $13.97{\pm}1.17$ years; 11 girls, mean age: $13.53{\pm}2.12$ year) that underwent RME were selected from the archives. CBCT scans had been taken before (T1) and after (T2) the RME. Moreover, 10 of the subjects had 6-month retention (T3) records. We used the CBCT data to evaluate the buccal and palatal aspects of the canines, first and second premolars, and the first molars at 3 vertical levels. The cortical bone thickness and alveolar bone height at T1 and T2 were evaluated with the paired-samples t-test or the Wilcoxon signed-rank test. Repeated measure ANOVA or the Friedman test was used to evaluate the statistical significance at T1, T2, and T3. Statistical significance was set at p < 0.05. Results: The buccal cortical bone thickness decreased gradually from baseline to the end of the retention period. After expansion, the buccal alveolar bone height was reduced significantly; however, this change was not statistically significant after the 6-month retention period. During the course of the treatment, the incidence of dehiscence and fenestration increased and decreased, respectively. Conclusions: RME may have detrimental effects on the supporting alveolar bone, since the thickness and height of the buccal alveolar bone decreased during the retention period.

Effect of Potato By-products Based Silage on Rumen Fermentation, Methane Production and Nitrogen Utilization in Holstein Steers

  • Pen, B.;Iwama, T.;Ooi, M.;Saitoh, T.;Kida, K.;Iketaki, T.;Takahashi, J.;Hidari, H.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.19 no.9
    • /
    • pp.1283-1290
    • /
    • 2006
  • The effect of substituting potato by-products based silage (PBS) for concentrates on ruminal fermentation, methane production and nitrogen utilization in Holstein steers was evaluated. Three growing Holstein steers ($490{\pm}19kg$, initial body weight) were used in a $3{\times}3$ Latin square experiment with three experimental diets in which PBS was included at (1) 0, (2) 19 and (3) 27%, on a dry matter basis, replacing concentrates and wheat bran. Increasing replacement levels of PBS slightly increased dry matter (DM), organic matter (OM), NDF and ADF intakes by the steers (p<0.05). Inclusion of PBS at 19% increased crude protein (CP) digestibility of the experimental diets compared with the control (p<0.05). Substitution with PBS increased ADF digestibility and nitrogen retention (p<0.05), but did not affect energy retention. Energy loss as methane ranged between 5.0 and 6.1% of the total gross energy intake. There were no significant differences in carbon dioxide and methane production among all PBS levels, while daily methane production numerically increased with PBS inclusion. Substituting PBS for concentrates did not significantly affect ruminal pH and ammonia N concentration. Total VFA concentration, VFA molar proportions and blood metabolites were also unaffected by PBS replacement. These results suggest that substitution of PBS up to 27% of diet dry matter did not significantly increase methane production and was equal or superior to concentrates in ADF digestibility and nitrogen retention for growing steers.

Is It Useful and Safe to Maintain the Sitting Position During Only One Minute before Position Change to the Jack-knife Position?

  • Park, Soo-Young;Park, Jong-Cook;Park, Sang-Hyun
    • The Korean Journal of Pain
    • /
    • v.23 no.3
    • /
    • pp.190-197
    • /
    • 2010
  • Background: Conventional spinal saddle block is performed with the patient in a sitting position, keeping the patient sitting for between 3 to 10 min after injection of a drug. This amount of time, however, is long enough to cause prolonged postoperative urinary retention. The trend in this block is to lower the dose of local anesthetics, providing a selective segmental block; however, an optimal dose and method are needed for adequate anesthesia in variable situations. Therefore, in this study, we evaluated the question of whether only 1 min of sitting after drug injection would be sufficient and safe for minor anorectal surgery. Methods: Two hundred and sixteen patients undergoing minor anorectal surgery under spinal anesthesia remained sitting for 1 min after completion of subarachnoid administration of 1 ml of a 0.5% hyperbaric bupivacaine solution (5 mg). They were then placed in the jack-knife position. After surgery, analgesia levels were assessed using loss of cold sensation in the supine position. The next day, urination and 11-point numeric rating scale (NRS) for postoperative pain were assessed. Results: None of the patients required additional analgesics during surgical manipulation. Postoperative sensory levels were T10 [T8-T12] in patients, and no significant differences were observed between sex (P = 0.857), height (P = 0.065), obesity (P = 0.873), or age (P = 0.138). Urinary retention developed in only 7 patients (3.2%). In this group, NRS was $5.0{\pm}2.4$ (P = 0.014). Conclusions: The one-minute sitting position for spinal saddle block before the jack-knife position is a safe method for use with minor anorectal surgery and can reduce development of postoperative urinary retention.

Occlusal and Periodontal Status of Teeth with Non-carious Cervical lesions (비우식성 치경부병소를 가진 구치부 치아의 교합 및 치주상태에 관한 연구)

  • Son, Min-Ook;Seo, Sung-Chan;Jeong, Dong-Keun;Lee, Eun-Suk;Kim, Hyung-Seop
    • Journal of Periodontal and Implant Science
    • /
    • v.34 no.3
    • /
    • pp.647-657
    • /
    • 2004
  • A non-carious cervical lesion(NCCL) is the loss of tooth structure at the cementoenamel junction level that is unrelated to dental caries. This study was to evaluate the occlusal and periodontal status of teeth with non-carious cervical lesions. We evaluated 105 teeth with non-carious cervical lesions in 35 subjects aged 38-75 years and characterized them based on the shape and dimension, plaque retention, bleeding on probing(BOP), probing pocket depth(PPD), occlusal status, brushing type, hypersensitivity and wear facet. The results of this study were as follows 1. No significant association was observed between cervical lesions and occlusal contact in lateral excursions. 2. No significant difference occurred in plaque retention, PPD, BOP between teeth with and without cervical lesions. 3. Test teeth had a significantly higher percentage of hypersensitivity and occlusal wear facet than teeth without cervical lesions. 4. Wedge shaped lesions had a significantly higher percentage of plaque than saucer shaped lesions. 5. Teeth with plaque were found to have significantly deeper PPD than teeth without plaque retention in cervical regions. 6. Teeth with occlusal contacts were found to have significantly deeper PPD than teeth without occlusal contacts. 7. No significant association was observed between cervical lesions and PPD independent of plaque retention and occlusal contacts Although more knowledge is necessary, our results suggest that occlusal contact and bacterial plaque may influence on periodontal tissue, but NCCL is not directly associated with periodontal health

An 1 year prospective comparative study evaluating the effect of microthread on the maintenance of marginal bone level (임프란트 미세나사선이 주위골 수준변화에 미치는 영향에 대한 1년간의 전향적 비교 연구)

  • Shin, Dong-Hwan;Cho, Kyoo-Sung;Park, Kwang-Ho;Moon, Ik-Sang
    • Journal of Periodontal and Implant Science
    • /
    • v.33 no.3
    • /
    • pp.349-358
    • /
    • 2003
  • The success of dental implant therapy relies mainly upon the presence and maintenance of bone adjacent to implant. An 1-year prospective study was performed, upon the patients who were diagnosed as having chronic adult periodontitis, and had been treated with dental implant. The purpose of this study was to measure the radiographic bone level changes proximal to Astra Tech Single Tooth Implants (ATST, Astra Tech AB, $M{\"{o}}lndal$, Sweden) with microthread and Astra Tech TiOblast Implant (ATTB) without microthread supporting fixed partial prosthesis. Measurements were used to determine mean marginal bone loss during the first year of loading, 17 subjects with its partial prosthesis supported by 37 implants were followed up for an 1-year period. The marginal bone loss of implants was positively correlated with the retention factor, microthread($Microthread^{TM}$) in crestal area of ATST. The results were as follows. 1. The mean marginal bone loss of ATST was 0.226${\pm}$0.395mm, while ATTB was 0.440${\pm}$0.360mm. There was a statistically significant difference between ATST and ATTB (p<0.05). 2. The mean bone loss of the upper jaw fixtures was 0.269${\pm}$0.265mm for ATST and 0.529${\pm}$0.417mm for ATTB . There was a statistically significant difference between ATST and ATTB (p<0.05). In the lower jaw the corresponding figures were 0.167${\pm}$0.231mm and 0.313${\pm}$0.214mm, respectively. There was no significant difference between ATST and ATTB (p>0.05). 3. The mean bone loss of ATST was lower than that of ATTB at all sites according to bone quality. There was a statistically significant difference between ATST and ATTB at bone quality type III(p <0.05). In conclusion, the mean bone loss of ATST was smaller than that of ATTB . Therefore, the retention factor of crestal area, microthread ($Microthread^{TM}$) was effective to maintenance of marginal bone level around fixture.

Effect of Carriers on Residue of Wetting Agent Containing Polyoxyethylene Octylphenyl Ether, Initial Wetting and Water Movement in Container Media (증량제의 종류가 Polyoxyethylene Octylphenyl Ether를 포함한 토양습윤제의 상토내 잔류성, 상토의 수분보유 및 이동에 미치는 영향)

  • Choi, Jong Myung;Min, Kyung Rae
    • Horticultural Science & Technology
    • /
    • v.18 no.6
    • /
    • pp.839-844
    • /
    • 2000
  • In developing of soil wetting agents using the mixture of polyoxyethylene octylphenyl ether [$C_8H_{17}O$ $(C_2H_4O)_{10}H$, POE] and polyoxyethylene+polypropyleneoxide tridecylether (1:1, w/w, CM-1), the effect of base carriers such as zeolite and vermiculite on changes of concentration of POE and on initial wetting of peat-vermiculite media were determined. The concentration of POE in the treatment of zeolite was higher than that of vermiculite. The treatments of POE+CM-1 with zeolite or vermiculite as carrier were effective in initial water retention of root media having about 510 mL of water per pot, where those of AquaGro and control had 490 mL and 400 mL of water per pot, respectively. In the evaporative water loss, the treatment of zeolite and AquaGro were faster than those of control and vermiculite. The treatment of AquaGro had faster water movement in root media than those of POE+CM-1 regardless of carriers and same trends were observed in the volume of water infiltrating into root media. Also, increasing the amount of POE+CM-1 resulted in increased water retention capacity, evaporative water loss, water movement in root media and amount of water infiltrating into root media.

  • PDF

A PRELIMINARY EVALUATION OF UNPROTECTED LOSS-OF-FLOW ACCIDENT FOR A PROTOTYPE FAST-BREEDER REACTOR

  • SUZUKI, TOHRU;TOBITA, YOSHIHARU;KAWADA, KENICHI;TAGAMI, HIROTAKA;SOGABE, JOJI;MATSUBA, KENICHI;ITO, KEI;OHSHIMA, HIROYUKI
    • Nuclear Engineering and Technology
    • /
    • v.47 no.3
    • /
    • pp.240-252
    • /
    • 2015
  • In the original licensing application for the prototype fast-breeder reactor, MONJU, the event progression during an unprotected loss of flow (ULOF), which is one of the technically inconceivable events postulated beyond design basis, was evaluated. Through this evaluation, it was confirmed that radiological consequences could be suitably limited even if mechanical energy was released. Following the Fukushima-Daiichi accident, a new nuclear safety regulation has become effective in Japan. The conformity of MONJU to this new regulation should hence be investigated. The objectives of the present study are to conduct a preliminary evaluation of ULOF for MONJU, reflecting the knowledge obtained after the original licensing application through CABRI experiments and EAGLE projects, and to gain the prospect of in-vessel retention for the conformity of MONJU to the new regulation. The preliminary evaluation in the present study showed that no significant mechanical energy release would take place, and that thermal failure of the reactor vessel could be avoided by the stable cooling of disrupted-core materials. This result suggests that the prospect of in-vessel retention against ULOF, which lies within the bounds of the original licensing evaluation and conforms to the new nuclear safety regulation, will be gained.