• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.7
• /
• pp.986-993
• /
• 2001

In balance experiments with rats either 25 or 50% of the casein protein in the control diet was replaced with one of the following eight sun-dried tropical biomass products: water spinach plants (WS) (Ipomoea aquatica Forsk), leucaena leaves (LL) (Leuceana leucocephala), duckweed plants (DW) (Lemma minor L.), groundnut foliage (OF) (Arachis hypogaea L.), trichantera leaves (Tric) (Trichantera gigantea), indicago leaves (Ind) (Indigofera hirsuta), mungbean foliage (Mb) (Phaseolus aureus), and cassava leaves (CL) (Manihot esculenta Crantz). The experiment included 102 rats with six individuals per treatment group. In three of the 16 biomass treatment groups, feed intake and weight gain of the rats were unacceptably low, and therefore they were excluded from the statistical evaluation, The crude protein (CP) content of the biomass products varied between 20.9% (Tric) and 33.2% (DW), whereas the content of NDF varied between 18.5% (Ind) and 32.2% (DW) of dry matter (DM). The total content of essential amino acids (g/16 g N) was comparable with that of alfalfa meal, except for GF and Tric, which were inferior. Between plant species, differences in dietary digestibility of organic matter (dOM) and CP (dCP) were observed (p<0.001). Also, the replacement level negatively influenced dOM and dCP (p<0.001). The lowest values for dOM (p<0.001) were observed for diets including biomass products with the highest content of NDF (OF, Tric, Mb, LL). Digestibility of CP was negatively affected by level of protein replacement. Significant (p<0.001) differences were found in N-retention and biological value among diets with different biomass products. The most favourable overall results were obtained for DW, WS and CL. The main factors affecting the nutritive value of the diets tested were their NDF content, dCP and AA profile of the biomass. Also antinutritive component(s) may have influenced the process of digestion and metabolism of some of the biomass products.

• Korean Journal of Environment and Ecology
• /
• v.34 no.1
• /
• pp.42-54
• /
• 2020

This study aimed to analyze the rate of increase and spread patterns of dead trees of the conifer (Abies koreana and others) in subalpine zones by using the high-resolution aerial images in Jirisan National Park around 10 years ago. Furthermore, factors affecting the death of conifer were identified by analyzing the altitude, topographical information, solar radiation, and moisture environment of the site where the dead trees are located. The number of dead trees per unit area increased by two to five times in the Banyabong peak, Yeongsinbong peak, and Cheonwangbong peak in Jirisan National Park over the past decade. The increase was about 2 times in the Banyabong peak, about 3.9 times in the Yeongsinbong peak, and about 5.2 times in the Cheonwangbong peak, indicating the most notable increase in the Cheonwangbong peak. It is estimated that dead trees commonly occurred in the environments where the soil moisture content was low due to the high slope, amount of evaporation was high due to strong solar radiation as the location faced south, and the soil was dry due to strong solar radiation and short rain retention time. In other words, dead conifer trees in subalpine zones were concentrated in dry location environments, and the tendency was the same more than ten years ago.

• Journal of Acupuncture Research
• /
• v.26 no.2
• /
• pp.125-145
• /
• 2009

Objectives : To analyze the inclusion criteria of participants, control group interventions, and the results of prior studies of acupuncture for OA. Also to identify aspects of the procedure that are associated with positive outcomes in order to establish ideal acupuncture treatment model. And to assess the methodological quality of the trials with modified Jadad score and FEAS in order to evaluate the quality of prior studies and find out whether or not acupuncture has a positive effect in treating OA. Methods : Articles up to the date of November 2008 were searched via computerized databases of PubMed, Journal of Korean Oriental Medicine, The Journal of Korean Acupuncture & Moxibustion Society and Journal of Oriental Rehabilitation Medicine. Bibliographies of reviewed papers were also searched and reviewed. Only randomized controlled trials (RCTs) and systematic reviews concerning the effects of acupuncture or electroacupuncture (EA) on symptoms of osteoarthritis of the human knee, published in English and Korean were included. The acupuncture treatment methods of the reviewed trials were assessed based on STRICTA. And the methodological quality of the trials was assessed by modified Jadad score and FEAS. Results : Twenty one trials of acupuncture for OA were analyzed. Based on the results of this review the following factors might contribute to optimal results from acupuncture treatment. 1) Usage of $ST_{35}$, $GB_{34$, $EX_{32}$, $ST_{36}$ and $SP_9$ acupuncture points. 2) More than four acupuncture points should be used. 3) More than 15 minutes of needle retention time. 4) Needle length-40mm and diameter-0.30mm 5) Usage of EA 6) more than 10 times treatment 7) Treatment frequency of more than once a week, 8) Treatment duration longer than 6 to 8 weeks. Conclusions : High quality clinical trials of Acupuncture for OA is still in lack. Future investigators must concentrate their attentions on the quality of acupuncture treatment itself used in the trials as well as the methodological quality of trials.

• Korean Journal of Soil Science and Fertilizer
• /
• v.15 no.4
• /
• pp.226-232
• /
• 1982

The incubation study of the phosphate Fertilizer Index (P.F.I) fertilizer recommandation method combining two factors-retention capacity of phosphate and available soil phosphate was conducted to test the applicability on both upland and paddy soils. The relationship between added P and the square root of the $NH_4OAc-P$ (for upland) or Bray No.1-P (for paddy) was a straight line for most of soils but was not straight for some soils which are low in phosphate absorption coefficient (P.A.C) However, the relationship between the value of the slop (termed as P.F.I) and the phosphate absorption coefficient was not showed a good correlation. The P.F.I was highly correlated with extractable Al on upland soils. The effect of extractable Al on P.F.I is more pronounced on newly reclaimed soil than cultivated upland. In case of paddy soils the P.F.I showed a high correlation with active iron contents. Also, P.F.I method was compared to NPK field trial on paddy soils to eximaine the applicability of the method in determining phosphate fertilizer recommandation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.7
• /
• pp.525-536
• /
• 2020

The study data used for the analysis of this study were obtained from the raw data during the 1st survey of the 2nd wave of the 2019 Panel Survey on the Employment of Persons with Disabilities conducted by the Korea Employment Agency for Persons with Disabilities. The results showed that, for regular workers, when there was a fixed term of employment contract, it was more likely that the job was retained for 12 months or longer. For the day laborers, workers without a fixed-term employment contract were more likely to retain their jobs for 12 months longer. This suggests that owing to the types of jobs that did not consider disabilities, people with disabilities were facing difficulties in terms of the options available in their job choices and their self-decisions. Therefore, the state would have to develop more job types and skills for these individuals to expand their career options. The growth in the employment of people with disabilities by small businesses that hire day laborers will depend on the diversification of the employment subsidy, which is again dependent on the size of the businesses.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.8 no.2
• /
• pp.77-84
• /
• 2000

Aim to get operation factors, an In-vessel Composting of Wastewater Sludge was operated. The composting equipment is consisted of three chamber, 1st, 2nd and 3rd consequently. In the results, the temperature of fermentation had shown that 1st fermentation chamber(F/C) temperature was higher than that of 2nd and 3rd fermentation chamber. The temperature was steady in all steps during the sludge being composted, the ranges of each step were $50^{\circ}{\sim}59^{\circ}C$ of 1st F/C, $41^{\circ}{\sim}50^{\circ}C$ of 2nd F/C, and $32^{\circ}{\sim}37^{\circ}C$ of 3rd F/C. Organic material content of the end product was 28% and that of pH was 7.5. Properties of the compost which have been composted on optimized condition, were shown that is acceptable to use as a fertilizer. Even in the winter time, the composting system was working well without any trouble. According to result of investigation, the end-product of the system was satisfied with the standard for a fertilizer usage. HRT(hydraulic retention time) of entire process was appropriated to be 14 days(0.9 days at drying and 3.5, 4.4, 5.2 days at each step of fermentations, respectively).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.7
• /
• pp.164-173
• /
• 2018

The purpose of this study is to investigate the effect of job experience while attending college on the turnover risk in the first job following graduation. Data was obtained from the 2015 Graduates Occupational Mobility Survey (GOMS). Subjects included college graduates under 30 years of age, who graduated from high school and entered college in the same year. The results of this study are as follows: First, students who had job experience while attending school were relatively low in economic characteristics, but showed active employment preparation behavior. Second, there was a significant difference in the characteristics of entry into the labor market according to whether they had job experience while attending school. It was found that the securing their first job of graduates with job experience was shorter, and the period of tenure was longer, but their wage was smaller than non-experienced graduates. Third, the Cox regression analysis confirmed what factors affected their employment period, and that job experience, experience frequency, and experience period while attending school had a positive effect on lowering turnover risk. Therefore, this study found that job experience during schooling years makes the employment period of the job longer after graduation, which is consistent with those who had previous job experience. However, the greater amount of job experience during the period of study positively affects job retention.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.5
• /
• pp.476-484
• /
• 2020

Purpose: This study determined the intention of obtaining long-term work by graduate nursing students. Methods: The subjects were 116 students in the fourth year of the nursing department located in G city of G province and G city of J province. A structured questionnaire was used from November 1, 2018 to November 27, 2018 for data collection. The SPSS/WIN 21.0 program was used for the collected data and the data was analyzed by t-tests, one-way ANOVA, Pearson's correlation coefficients, and stepwise multiple regression analysis. Result: The major factors influencing the intention to work were satisfaction with their academic major (β=.54, p<.001), and the career after employment in a hospital) (β=.28, p<.001). The explanatory power was 46.5% (F=51.00, p<.001). Conclusion: To increase the satisfaction of studying nursing, it is necessary to apply various educational programs to positively recognize the nursing profession and a nurse's image and increase optimism and social efficacy. There is a need to develop a tool to measure the intention of obtaining long-term nursing jobs for nursing students in hospitals. This study suggested a way to increase the intention of obtaining long-term work by improving the degree of satisfaction with nursing profession.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.8
• /
• pp.411-419
• /
• 2016

The objective of this study was to evaluate the application possibility of tube type electrolysis module system using recirculation process through removal organic matters and nitrogen in the pigment wastewater. The tube type electrolysis module consisted of a inner rod anode and an outer tube cathode. Material used for anode was titanium electroplated with $RuO_2$. Stainless steel was used for cathode. It was observed that the pollutant removal efficiency was increased according to the decrease of flowrate and increase of current density. When the retention time in tube type electrolysis module system was 180 min, chlorate concentration was 382.4~519.6 mg/L. The chlorate production was one of the major factors in electrochemical oxidation of tube type electrolysis module system using recirculation process used in this research. The pollutant removal efficiencies from the bench scale tube type electrolysis module system using recirculation operated under the electric charge of $4,500C/dm^2$ showed the $COD_{Mn}$ 89.6%, $COD_{Cr}$ 67.8%, T-N 96.8%, and Color 74.2%, respectively and energy consumption was $5.18kWh/m^3$.

• The Journal of Korean Academy of Prosthodontics
• /
• v.41 no.1
• /
• pp.1-19
• /
• 2003

The surface of metals should be as smooth as possible for optimum comfort, oral hygiene, low plaque retention, and resistance to corrosion. In this study five specimens of each precious metal(type III gold alloy, ceramic gold alloy, and Ag-Pd alloy) were divided into five groups according to finishing and polishing procedures : group 1(sandblaster), group 2(group 1+stone), group 3(group 2+brown rubber), group 4(group 3+green rubber), and group 5(group 4+rouge). Six specimens of each non-precious metal(Co-Cr alloy, Ni-Cr alloy, and Co-Cr-Ti alloy) were divided into six groups: group 1(sandblaster), group 2(group 1+hard stone), group 3(group 2+electrolytic polisher), group 4(group 3+brown hard rubber point), group 5(group 4+green hard rubber point), and group 6(group 5+rouge). Considering factors affecting the rate of abrasion, the same dentist applied each finishing and polishing procedure. In addition, the surface roughness of enamel, resin, and porcelain was evaluated. The effect of finishing and polishing procedures on surface roughness of precious and non-precious metals, enamel, resin, and porcelain was evaluated by means of Atomic Force Microscope(AutoProbe CP. Park Scientific Instruments, U.S.A.) that can image the three dimensional surface profile and measure average surface roughness values of each sample at the same time. The obtained results were as follows : 1. According to finishing and polishing procedures, the surface roughness of type III gold alloy, ceramic gold alloy, and Ag-Pd alloy was decreased in the order of group 1, 2, 3, 4, and 5 (P<0.01). 2. According to finishing and polishing procedures. the surface roughness of Co-Cr alloy, Ni-Cr alloy, and Co-Cr-Ti alloy was decreased in the order of group 1, 2, 3, 4, 5, and 6 (p<0.01). 3. There was not statistically significant difference in the surface roughness among three metals of precious metals in group 1 but was significant difference in group 2, 3, 4, and 5 (P<0.05). 4. There was not statistically significant difference in the surface roughness among three metals of non-precious metals in all groups. 5. When the surface roughness of the smoothest surface of each metal, enamel. porcelain, and resin was compared, porcelain was the smoothest and the surface roughness was decreased in the order of Ni-Cr alloy. Co-Cr alloy. Co-Cr-Ti alloy, resin. Ag-Pd alloy, ceramic gold alloy type III gold alloy, and enamel (P<0.01). The results of this study indicate that the finishing and polishing procedures should be carried out in a logical, systematic sequence of steps and the harder non-precious metals may be less resistance to abrasion than are the softer precious metals.