• Journal of the Korean Applied Science and Technology
• /
• v.34 no.4
• /
• pp.1076-1084
• /
• 2017

For analyzing the qualitative and quantitative analysis of fuel marker in petroleum products, the applicability of HPLC was studied. For the qualitative analysis of fuel marker in kerosene and automotive diesel, optimal analytical conditions(ratio of mobile phase solvent, flow rate, etc) in HPLC were selected and calibration curve for quantitative analysis of fuel marker was prepared based on the result of qualitative analysis. In particular, the correlation coefficient of calibration curve in kerosene and automotive diesel was shown to be 0.999 in a certain concentration range and it could be applied to the quantitative analysis. The results of analysis using the UV/Vis spectrometer, which is the current analysis method of fuel marker, were compared with the analysis results using the HPLC. The kerosene showed a low deviation of about 7 % and the automotive diesel showed a somewhat large deviation of about 20 %.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.1
• /
• pp.51-57
• /
• 2007

Levan, the fructose polymer is an indigestible carbohydrate regularly consumed by humans. Its physiological functions, in terms of hypocholesterolemic effect and calcium metabolism, have not been well documented. The objective of this study was to investigate the effects of levan on blood lipids and the calcium absorption ratio in rats fed a 0.1% low calcium diet. Thirty rats were divided into three groups and fed a 0.1% low calcium diet (control) or low calcium diets containing either 2.5% levan or 5% levan for eight weeks. The blood lipid and biomarkers relevant to Ca metabolism (urinary Ca and hydroxyproline), the femoral weight and the Ca contents were determined. The body weight gains were lower in the 5% levan group than the control group. Plasma concentrations of triacylglycerol and LDL-cholesterol decreased in the 5% levan group, compared to the control group, but the atherogenic indice were not affected. Blood alkaline phosphatase activity, Ca and urinary hydroxyproline excretion levels were not different in the three groups. The net calcium absorption in rats fed a 5% levan diet was greater than rats fed the control diet, while the femoral weights and Ca contents were not significantly different in the three groups. We concluded that a 5% levan diet could both enhance the calcium absorption and improve the lipid profiles in rats fed a low calcium diet.

• Korean Journal of Soil Science and Fertilizer
• /
• v.22 no.4
• /
• pp.323-328
• /
• 1989

This study was conducted to find out the behavior of anaerobic microorganisms and anaerobic decomposition products of rice straw in the strict anaerobic condition. The number of methanogenic bacteria were more isolated than cellulolytic bacteria from the digester decaying rice straw during the entire incubation time. The activity of anaerobic microorganisms, such as methanogens and cellulolytics, were high the early incubation time in the treatment of rice straw with urea, but without urea was low at that time and increased moderately after 10 days incubation. Volatile fatty acid as intermediate anaerobic decomposition products had a longer retention time and higher accumulation rate in the treatment of rice straw without urea than with urea, and predominant fatty acid was propionic acid. Gas generation rate as final products were very intimate relationship with the activity of methanogenic bacteria. Average Eh value was -250mV during the incubation time and $CH_4$ : $CO_2$ percent ratio was about 60~65 : 35~40 in this Eh value. Decomposition rate of rice straw calculated from $CH_4$ and $CO_2$ gas wars 45.6% for 50 days in the treatment of rice straw with urea, and 36.8% without urea.

• Korean Chemical Engineering Research
• /
• v.57 no.6
• /
• pp.861-867
• /
• 2019

$Li_4Ti_5O_{12}$ is a promising next-generation anode material for lithium-ion batteries due to excellent cycle life, low irreversible capacity, and little volume expansion during charge-discharge process. However, it has poor charge capacity at high current density due to its low electrical conductivity. To improve this weakness, porous $Li_4Ti_5O_{12}$ was synthesized by sol-gel method with P123 as chelating agent. The physical characteristics of as-prepared sample was investigated by XRD, SEM, and BET analysis, and electrochemical properties were characterized by cycle performance test, cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS). $Li_4Ti_5O_{12}$ synthesized by 0.01mol ratio of P123/Ti showed most unified particle size, high specific surface area, and relatively high porosity. EIS analysis showed that depressed semicircle size was remarkably reduced, which suggested resistance value in electrode was decreased. Capacity in rate performance showed 178 mAh/g at 0.2C, 170 mAh/g at 0.5C, 110 mA/h at 5C, and 90 mAh/g at 10C. Capacity retention also showed 99% after rate performance.

• Journal of Animal Science and Technology
• /
• v.63 no.4
• /
• pp.827-840
• /
• 2021

Several studies have focused on Ca and P requirements for pigs. These requirements are estimated from their retention and bone formation. However, modern pig breeds have different responses to dietary Ca and P than traditional breeds, and their requirements are expected to change on an annual basis. Besides individual Ca and P needs, the Ca to P ratio (Ca/P) is an important factor in determining requirements. This study aimed to implement a linear and quadratic regression analysis to estimate Ca and P requirements based on average daily gain (ADG), apparent total tract digestibility (ATTD) of Ca (ATTD-Ca), ATTD of P (ATTD-P), and crude protein (CP) digestibility. Results show that Ca/P had linear and quadratic effects on ADG in the phytase-supplemented (PS) group in both the 6-11 kg and 11-25 kg categories. In the latter category, the CP digestibility was linearly increased in response to increasing Ca/P in the without-phytase (WP) group. In the 25-50 kg category, there was a linear response of ADG and linear and quadratic responses of CP digestibility to Ca/P in the PS group, while a linear and quadratic increase in CP digestibility and a quadratic effect on ATTD-Ca were observed in the WP group. In the 50-75 kg category, Ca/P had significant quadratic effects on ADG in the PS and WP groups, along with significant linear and quadratic effects on ATTD-Ca. In addition, Ca/P had significant quadratic effects on ATTD-P and led to a significant linear and quadratic increase in the CP digestibility in the WP group. In the 75-100 kg category, analysis showed a significant decrease in ATTD-Ca and ATTD-P in the PS and WP groups; in the latter, ATTD-P and ATTD-Ca were linearly decreased by increasing Ca/P. In conclusion, our equations predicted a higher Ca/P in the 6-25 kg bodyweight categories and a lower Ca/P in the 50-100 kg category than that recommended in the literature.

• Journal of Wetlands Research
• /
• v.21 no.3
• /
• pp.191-198
• /
• 2019

High impervious surfaces increase the surface runoff during rainfall and reduces the underground infiltration thereby leading to water cycle distortion. The distortion of water cycle causes various urban environmental problems such as urban flooding, drought, water pollutant due to non-point pollution runoff, and water ecosystem damage. Climate change intensified seasonal biases in urban rainfall and affected urban microclimate, thereby increasing the intensity and frequency of urban floods and droughts. Low impact development(LID) technology has been applied to various purposes as a technique to reduce urban environmental problems caused by water by restoring the natural water cycle in the city. This study evaluated the contribution of hydrologic characteristics and water cycle recovery after LID application using long-term monitoring results of various LID technology applied in urban areas. Based on the results, the high retention and infiltration rate of the LID facility was found to contribute significantly to peak flow reduction and runoff delay during rainfall. The average runoff reduction effect was more than 60% at the LID facility. The surface area of the LID facility area ratio(SA/CA) was evaluated as an important factor affecting peak flow reduction and runoff delay effect.

• Korean Journal of Poultry Science
• /
• v.45 no.4
• /
• pp.273-283
• /
• 2018

Two diet energy levels (high or low) and two bedding material (rice husk or saw dust) treatments were designed for either male or female slow-growing Korean meat-type chicken (Hanhyop 3) to make totally eight treatments for 11~75 d feeding trial. Body weight gain (BWG) were influenced by energy levels, sex of bird and bedding material type. There were interaction effect among those three factors. Feed intakes (FI) by male bird during each and overall periods were higher than those by female. Diet energy levels and bedding material affected the FI only during final 56~75 d period, of which FI of high energy diet was higher in male whereas that of low energy diet was higher in female. Although feed conversion ratio (FCR) was improved by high energy diet, the better FCR has dissipated during 41~75 d, when the most of overall BWG were achieved. Apparent total tract retention (ATTR) of nutrients were higher in male than those in female birds with exception on fat ATTR. Fat ATTR was improved when fed low energy diet regardless of the sex of birds. Both energy levels and sex of bird influenced the color of breast. Thiobarbituric acid reactive substances (TBARS) value of female thigh was higher than that of male. Levels of moisture and P in female thigh were lower although level of fat in female breast was higher than those in male, respectively. This study showed that diet energy levels for Hanhyop 3 chicken, especially during 41~75 d, should be differently formulated between male and female bird.

• Journal of Korea Society of Waste Management
• /
• v.35 no.8
• /
• pp.744-753
• /
• 2018

The Stockholm Convention, which was adopted in Sweden in 2001 to protect human health and the environment, includes regulations for Persistent Organic Pollutant Rotors such as toxic and bioaccumulatives. Currently, there are 28 types of materials. This prohibits and limits the production, use, and manufacture of products. Korea is a member of the Convention, and it is necessary to prepare management and treatment plans to address the POP trends. Thus, we experimentally investigate whether the environmentally stable incineration is achieved when the sample is thermally treated using the Lab-scale (1 kg/hr). The target samples is pesticides in liquid phase and solid phase. In this study, organic chlorinated pesticides and their thermal characteristics were analyzed. We calculated the theoretical air volume based on the element analysis results. Because the interior of the reactor is small, more than 10 times of the air ratio was injected. The retention time was set to at least 4 seconds using a margin. The incineration temperature was $850^{\circ}C$ and $1100^{\circ}C$. Thus, we experimentally investigated whether the environmentally stable incineration was achieved when the sample was thermally treated using the Lab-scale (1 kg/hr). We analyzed five types of exhaust gas; the 02 concentration was high, but the CO amount decreased. Complete combustion is difficult because of the small size of the furnace due to the nature of Lab-scale. The organic chlorine-containing pesticide had an average decomposition rate of 99.9935%. Considering the decomposition rates of organic chlorine-containing pesticide in this study, the incineration treatment at over 2 ton/hour, which is typical for a conventional incinerator, is possible. Considering the occurrence of dioxins and unintentional persistent organic pollutants, it can operate at more than $1,100^{\circ}C$.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.1
• /
• pp.28-34
• /
• 2004

This study was performed to evaluate the characteristics of the carboxymethylated substrate from high reactive autohydrolyzed cellulose (HRC) and those of commercial α-cellulose (CAC) and refiner mechanical pulp (RMP). Saccharification rates of HRC substrate were achieved over 70% with 12 hr hydrolysis, about 90% with 24 hr, and 99.5% with 72 hr. CMCase and avicelase activities of cellulase onozuka were 4.09 ㎛ G/mg·min and 14.0 ㎛ G/mg·min, respectively. There were no any significant changes in cellulase activities with this substrate. The saccharification rates of CAC and RMP were very low, 57% and 38% with 72 hr, respectively. Those lignin-zero autohydrolyzed substrates, HRC and CAC, were highly carboxymethylated at the high alkali concentration, near 30%, for 3 hr. reaction, and resulted in 1.13-1.15 of D.S., besides 0.85 of D.S. from RMP. Water solubilities of carboxymethylated substrates were increased with an increase of D.S., 98-98.5% from HRC and CAC and 31.5% from RMP. RMP which has low specific surface area showed lower water retention values, compared to high values of 435 and 321% from CAC and HRC, respectively. There were no direct relationship between surface area and swelling ratio of the substrates.

• Korean Chemical Engineering Research
• /
• v.60 no.3
• /
• pp.327-333
• /
• 2022

In this study, silicon/carbon nanotube/carbon (Si/CNT/C) composites for anode were prepared to improve the volume expansion of silicon used as a high-capacity anode material. Si/CNT were prepared by electrostatic attraction of the positively charged Si and negatively charged CNT and then hydrothermal synthesis was performed to obtain the spherical Si/CNT/C composites. Poly(vinylidene fluoride) (PVDF), polyacrylic acid (PAA), and styrene butadiene rubber (SBR) were used as binders for electrode preparation, and coin cell was assembled using 1.0 M LiPF₆ (EC:DMC:EMC = 1:1:1 vol%) electrolyte and fluoroethylene carbonate (FEC) additive. The physical properties of Si/CNT/C anode materials were analyzed using SEM, EDS, XRD and TGA, and the electrochemical performances of lithium-ion batteries were investigated by charge-discharge cycle, rate performance, dQ/dV and electrochemical impedance spectroscopy tests. Also, it was confirmed that both capacity and rate performance were significantly improved using the PAA/SBR binder and 10 wt% FEC-added electrolyte. It is found that Si/CNT/C have the reversible capacity of 914 mAh/g, the capacity retention ratio of 83% during 50 cycles and the rate performance of 70% in 2 C/0.1 C.