• Asian-Australasian Journal of Animal Sciences
• /
• v.11 no.2
• /
• pp.121-127
• /
• 1998

Thirty two Omani sheep with eight animals each of; intact males (INT), males castrated with rubber rings immediately after birth (RR), males castrated with a burdizzo at 8 weeks of age (BC) and intact females (IF) were fed ad libitum a concentrate diet (CP 16%) plus chopped Rhodesgrass hay (8% CP) from weaning until slaughter at 28 kg. INT lambs grew faster from 9 to 20 weeks of age (p < 0.05) thus they were significantly heavier at 20 weeks of age than BC and IF, but not RR lambs. INT consumed more total feed than other sex groups over the period from 9 to 20 weeks of age. There were no significant differences between lambs of all experimental groups in feed per gain ratio. INT lambs had lower (p < 0.01) dressing percentage (DP) than RR, BC and IF. As a percentage in the empty body weight (EBW), INT had higher proportions of head, feet, empty gut (p < 0.001), liver (p < 0.05) and genitals (p < 0.05) but lower proportions of lungs and trachea (p < 0.05) than BC and IF lambs. INT males had a significantly higher (p < 0.05) proportion of bone than RR and IF lambs but lower (p < 0.05) proportion of fat than RR and IF. As a percentage in EBW, IF had the highest protortion (p < 0.001) of total body fat (TBF) followed by BC and RR whereas INT males had the lowest proportion. There was a general trend of IF having the highest proportion of individual and total non-carcass fat (TNCF) and total carcass fat (TCF) followed by BC and RR lambs whereas INT lambs had the lowest protortions of individual carcass and non-carcass fat depots. There were only few sex or castration effects on carcass tissue distribution. IF had higher proportions of intermuscular fat in the chuck, plate, leg and flank than INT and BC. The current study demonstrated that castration of intensively-raised male Omani native sheep especially at weaning using a burdizzo retarded growth rate and reduced carcass quality by increasing fat content.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.1 no.1
• /
• pp.172-177
• /
• 1990

The reverse of reinforcement technique was used in treating rumination of a 12-year old (estimated age) mentally retarded child in a residential setting. The subject's rumination pattern was first to vomit the food onto the floor and then to eat it back in several attempts. Consequently, the way to reverse the contingency of rumination in this child was to take away the discharge whenever rumination occurred. An ABAB single subject design was adopted to evaluate the treatment effect. In baseline 1 the frequency of his rumination for 2.5 hours after eating was an average of 46(range= 30-62), while decreased to 6.7 in treatment condition 1. However, when the discharge was not taken away in baseline 2, his rumination increased to 34 times and then decreased to zero to 1 time when the reverse of reinforcement was reinstituted in treatment condition 2. The results clearly indicate that the reverse of reinforcement which was implemented in the form of removing the discharge from the floor was successful. It was reported that the treatment effect has been maintained over 10 months post treatment.

• Korean Journal of Animal Reproduction
• /
• v.10 no.2
• /
• pp.168-174
• /
• 1986

These experiments were carried out to clarify the optimalconditions and interspecific cross reaction of H-Y antibody activity. H-Y antiserum was prepared in inbred SD female rats and Balb/c female mice by repeated immunization of rat newborn testis homogemate, rat and mouse spleen cells obtained from males of same strain. The activity of H-Y antibody in antiserum was tested by ELISA and biological tests. The cross reactivity of H-Y antibody was confirmed by culturing mouse and rabbit embryos in medium containing H-Y antibody and complement obtained from rat and guinea pig, respectively. The optimal condition for the activity of H-Y antibody was also investigated by culturing embryos in medium with different pH and complement concentration. The results obtained in these experiments were summarized as follows: 1. The formation rates of H-Y antibody in rats immunized with newborn testis and spleen cell were 40.0 and 50.0% respectively, and that in mouse immunized with spleen cell was 48.4%. 2. The activity of H-Y antibody was not affected by pH in range of 6.5 to 8.0, and the same was true for the relative concentration of complement to the H-Y antibody. 3. Minimum time needed for the activity of H-Y antibody was confirmed to be 0.5 to 1 hour and 24 to 48 hours respectively for the zona free embryos and intact embryos. 4. When mouse and rabbit embryos were treated with H-Y antibody obtained from rat, 46.4 and 54.8% of embryos were retarded or destroyed. From these results it could be said that H-Y antibody had strong interspecific cross reactivity.

• Journal of the Korea Concrete Institute
• /
• v.16 no.3 s.81
• /
• pp.383-390
• /
• 2004

This study has focused on the possibility for recycling tailings from the Sangdong tungsten mine as admixture for concrete. The XRD(X-ray diffraction analysis) and PSA(Particle size analysis) were performed to find mineralogical characteristics. As a result of XRD analysis, the tailings from the Sangdong tungsten fine were composed of quartz, chlorite, anorthite and cordierite etc. As a result of KSLT for cement mortar mixed with tailings from the Sangdong tungsten mine, most of heavy metals were determined as below the guide line for waste material. In addition, the setting time and compressive strength of cement mortar mixed with tailings from the Sangdong tungsten mine were investigated. It was indicated that the initial and final set were retarded according to increasing replacement of tailings from the Sangdong tungsten mine. The compressive strength of mortar was decreased with increasing replacement of failings from the Sangdong tungsten mine.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.27 no.2
• /
• pp.135-141
• /
• 2001

Recently, the consumption of soy products has been associated with low rates of hormone-dependent and hormone-independent cancers. Asians, who consume $20{\sim}50times$ more soy per capita than Americans, have lower incidence and death rates from breast and prostate cancer. Because soy contains the isoflavones genistein and daidzein (present as their glycosidic conjugates) at mg/g concentrations, it has been suggested that isoflavones might be acting as natural chemopreventive agents. During the 1980s several groups of investigators carried out experiments to test the effectiveness of soy in the diet in animal models of cancer. These studies reported a protective effect of soy; none showed that soy increased cancer risk. Genistein was shown to inhibit the growth of a wide variety of tumor cell types in culture. The purpose of this study was to evaluate the effects of genistein on the carcinogenesis induced by topical application of 0.5% 9, 10-dimethyl 1,2-benzanthracene (DMBA) on the hamster buccal pouch. 48 syrian hamsters were employed in this study, divided into experimental group and control. 24 animals (DMBA topical application group) had the right buccal pouch painted 3times weekly with 0.5% DMBA in mineral oil, 24 animals (genistein group) were supplied with 0.1mg genistein with DMBA topical application. 3 animals in the experimental group and control were sacrificed at serially each other week after experiments. Their buccal pouches were removed and routinely processed for microscopic examination. The results were as follows: 1. In DMBA topical application and genistein group, they showed carcinogenesis as time goes by experimental stage. 2. Genistein group was retarded in carcinogenesis related to the acanthosis, hyperkeratosis, epithelial dysplasia. 3. p53 immunohistochemical study showed that the p53 protein of genistein group was less expressed than that of the control group. Thus, it seems that genistein has chemopreventive effect on the carcinogenesis in the oral cavity, but further study is required to elucidate the anticancer mechanism of genistein.

• Journal of the Korean Society for Heat Treatment
• /
• v.15 no.5
• /
• pp.213-218
• /
• 2002

In order to develop the economic and environmental water-soluble black coloring agent, some adequate chemical mixtures were mixed and this solution was applied to coat quenched and tempered 51B20 steel bolt. Some basic properties of the solution and characteristics of the coated film in addition to the corrosion resistance were investigated. The developed 100 kg of water-soluble black coloring agent solution was a chemical mixture consisted of 10 kg of aqueous coloring agent, 40 kg of surface active agent, 0.3 kg of anti-foam agent and $50{\ell}$ of water. The coated film of the bolt was composed of hard layer of about $2{\mu}m$ and the disbondable soft layer of about $4{\mu}m$ above the hard layer. Many surface active agents peaks and a few hydrophilic peaks were observed in the coated film. Surface roughness value of the coated bolt was lower than that of the non-coated bolt. Corrosion resistance of the coated bolt considerably improved and also relatively showed a good polarization resistance at test condition of $40^{\circ}C$ colorizing temperature and 5% the solution concentration in 3% NaCl anodic polarization test. Initial appearance time of the surface rust was greatly retarded owing to the coated film in salt spray test.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1996.04a
• /
• pp.278-278
• /
• 1996

Judging from hydrocortisone concentration in dosing area, the extent of absorption was reduced in the liposome-gel formulation. However, higher and sustained skin concentrations of hydrocortisone were achieved for the liposome-gel as compared to the ointment. Drug concentration in both viable and deep skin reached its maximum within 0.5 h after application of both formulations to both skin types. Drug concentrations in both skins from the ointment declined with time, while those from the liposome-gel were greatly sustained. The sustainment by the liposome-gel was more remarkable in the viable skin than in the deep skin. Drug concentration in the viable skin could be maintained at a nearly constant level for over 8 h by applying the liposome-gel. As a result, a 5-fold higher viable skin drug concentration was obtained from the liposome-gel than from the ointment at 8 h after the application to the SC-removed skin. However, the plasma concentration of hydrocortisone at 4 h from the liposome-gel was only one-fourth (p<0.01) the value from the ointment when the drug was applied to the SC-removed skin, consistent with. the lower urinary (one-third, p<0.05) and fecal (one-half, p＜0.05) excretion. Conclusions : Retarded diffusion of the drug from the skin to the systemic blood stream appears to be a potential factor in the sustained skin concentration of hydrocortisone from the liposome-gel, Interaction of hydrocortisone in the skin with phosphatidylcholine, a component of the liposomes and skin, may well be a factor in retarding the diffusion of the drug in the skin.

• Applied Chemistry for Engineering
• /
• v.9 no.7
• /
• pp.998-1003
• /
• 1998

$BaTiO_3$ thin film was electrochemically deposited on Ti electrode in a 0.4 M $Ba(OH)_2$ solution of $85^{\circ}C$ using a current pulse waveform. Both $BaTiO_3$ crystallinity and faradaic efficiency for the film formation were enhanced with the increase of cathodic current density and pulse time. Based on the surface analysis and electrochemical studies, it was suggested that, during cathodic pulsed, the surface pH increase due to the reduction of $H_2O$ accelerates the structural changes of Ti oxides which were formed during anodic cycle. Prior to experiments, Ti oxides were intentionally grown in 0.1 M $H_2SO_4$ solution and the effect of initial oxide film thickness on the $BaTiO_3$ film formation was investigated. The migration of $Ti^{+4}$ ions through the oxide film was retarded with the increase of film thickness and it was observed that the crystallization of $BaTiO_3$ was only limited to the defect area of surface oxides.

• Applied Biological Chemistry
• /
• v.20 no.2
• /
• pp.242-246
• /
• 1977

In the barly coleptile sections treated with either $1{\times}10^{-5}M$ abscisic acid (ABA) or $1{\times}10^{-5}M$ gibberellic acid (GA), the time course changes of ribonuclease (RNase) activity and ribonucleic acid (RNA) profiles were studied. The results may be summarized as follows: 1. While GA suppressed RNase activity, ABA activated it. 2. High level of s-RNA and low level of r-RNA compared with normal plant sections in hormone-untreated coleoptiles seemed to be the results of increased RNase activity in the incubation period. 3. While GA retarded the decomposition of r-RNA, ABA activated it and the results seemed to be related with RNase activity. 4. GA activated the synthesis of RNA-DNA component, and ABA suppressed it. 5. Increase in the amount of s-RNA with the treatment of ABA may be due to the decomposition of r-RNA.

• Proceedings of the KWS Conference
• /
• 2006.05a
• /
• pp.30-32
• /
• 2006

The interfacial reaction and reliability of eutectic Sn-Pb and Pb-free eutectic Sn-Ag ball-grid-array (BGA) solders with an immersion Ag-plated Cu substrate were evaluated following isothermal aging at $150^{\circ}C$. During reflowing, the topmost Ag layer was dissolved completely into the molten solder, leaving the Cu layer exposed to the molten solder for both solder systems. A typical scallop-type Cu-Sn intermetallic compound (IMC) layer was formed at both of the solder/Cu interfaces during reflowing. The thickness of the Cu-Sn IMCs for both solders was found to increase linearly with the square root of isothermal aging time. The growth of the $Cu_3Sn$ layer for the Sn-37Pb solder was faster than that for the Sn-3.5Ag solder, In the case of the Sn-37Pb solder, the formation of the Pb-rich layer on the Cu-Sn IMC layer retarded the growth of the $Cu_6Sn_5$ IMC layer, and thereby increased the growth rate of the $Cu_3Sn$ IMC layer. In the ball shear test conducted on the Sn-37Pb/Ag-plated Cu joint after aging for 500h, fracturing occurred at the solder/$Cu_6Sn_5$ interface. The shear failure was significantly related to the interfacial adhesion strength between the Pb-rich and $Cu_6Sn_5$ IMC layers. On the other hand, all fracturing occurred in the bulk solder for the Sn-3.5Ag/Ag-plated Cu joint, which confirmed its desirable joint reliability.