• 제목/요약/키워드: Resultant matrix

검색결과 89건 처리시간 0.027초

직교변환에 의한 Walsh 및 Golay 코드의 상호상관 제어방식과 수정된 코드를 사용한 비동기 CDMA 시스템의 비트오율 성능에 관한 연구 (A Study on Cross-correlation Control Schemes on Walsh and Golay Codes Based on the Orthogonal Transformation and BER Performance Evaluation of Asynchronous CDMA System Using the Modified Codes)

  • 이원창;김명진
    • 융합신호처리학회논문지
    • /
    • 제9권4호
    • /
    • pp.304-312
    • /
    • 2008
  • Walsh 코드나 Golay 코드와 같은 직교 코드는 동기가 맞지 않은 경우 상호상관 값이 커질 수 있으므로 CDMA 시스템의 역방향 링크와 같이 사용자간 동기가 맞지 않는 경우 직교성이 손상되어 사용자간 간섭이 발생하기 때문에 사용자 구별용으로 거의 사용되지 않는다. Wysocki는 기존의 Walsh-Hadamard 행렬에 직교변환 행렬을 곱함으로써 생성된 코드들이 직교성을 유지하면서 코드간 상호상관 값이 커지지 않도록 할 수 있음을 보였다. Soberly와 Wysocki는 Golay 코드에 대해서 유사한 상호상관 함수의 제어방식을 제안하였다. 이것은 적절한 직교변환을 사용하면 Walsh 코드나 Golay 코드의 상호상관 값을 감소시킬 수 있고, 따라서 CDMA 역방향 링크에서 사용자 구별용으로 사용될 수 있음을 의미한다. 본 논문에서는 비동기 CDMA 링크의 성능에 영향을 주는 코드간의 상호상관 관련 파라미터들을 알아보고, 직교변환에 의해 이들 파라미터들이 어떻게 변화되는지 분석하였다. Walsh 코드와 Golay 코드에 대한 직교변환 행렬을 설계함에 있어 수정된 Walsh 또는 Golay 코드의 직교성을 유지하면서 결과 코드의 비주기 상호상관 피크치의 최대값($ACC_{max}$) 또는 비주기 상호상관의 제곱평균($R_{cc}$)을 최소화하도록 하였다. 직교변환에 의해 생성된 코드집합을 사용한 CDMA 시스템에 대하여 사용자간 동기가 맞지 않은 경우에 대해 비트오율 성능을 시뮬레이션을 통해 분석하여 성능을 개선시킬 수 있음을 확인하였다.

  • PDF

시료고체상분산처리와 액체크로마토그라피를 이용한 소의 근육, 간 및 천엽에서의 벤지미다졸계 구충제 잔류분석 (Matrix solid phase dispersion isolation and high performance liquid chromatographic determination of five benzimidazole anthelmintics in bovine muscle, liver and omasum)

  • 김충희;김곤섭;박정희;하대식;류재두;손성기;허정호;정명호;김종수
    • 대한수의학회지
    • /
    • 제42권2호
    • /
    • pp.171-181
    • /
    • 2002
  • Simultaneous multiresidue analysis using liquid chromatography determination for five benzimidazole anthelmintics(thiabendazole, oxibendazole, albendazole, mebendazole and fenbendazole) in bovine muscle, liver and omasum has been described. Blank or benzimidazole-fortified samples(0.5g) were blended with bulk $C_{18}$($40{\mu}m$, 18% load, endcapped, 2g). A column made from the resultant $C_{18}$/animal tissue matrix was first washed with hexane($8m{\ell}$), following which the benzimidazoles were eluted with acetonitrile($8m{\ell}$). Analytes of extracted sample were determined by liquid chromatography with UV detector at 290nm. Correlation coefficients of standard curves for individual benzimidazole isolated from fortified samples, using internal standardization, were linear($0.991{\pm}0.007$ to $0.996{\pm}0.005$) with average relative percentage recoveries from $62.1{\pm}3.8(%)$ to $92.3{\pm}7.5(%)$ for the concentration range($0.2{\sim}6.4{\mu}g/g$), respectively. Recoveries rates of TBZ, MBZ in liver, OBZ, MBZ in muscle and TBZ, MBZ in omasium from fortified benzimidazole were 92.%, 87.3%, 74.5%, 82.7%, 75.2% and 83.5% at condition II, respectively. Condition II showed higher recoveries rates than condition I. These results indicated that the matrix solid phase dispersion(MSPD) methodology is acceptable for the determination of 5 benzimidazole anthelmintics and may also suitable for other matrixes of food animal origin.

밀도 변화를 포함하는 3차원 연직함수 전개모형 (A Three-Dimensional Galerkin-FEM Model with Density Variation)

  • 이호진;정경태;소재귀;강관수;정종율
    • 한국해안해양공학회지
    • /
    • 제8권2호
    • /
    • pp.123-136
    • /
    • 1996
  • 본 연구에서는 시 공간적으로 변화하는 밀도구조를 고려한 3차원 연직함수 전개모형을 제안한다. 정수압을 가정하며 열보존식과 상태방정식의 도입으로 밀도변화가 고려된다 수평방향으로의 변화는 유한 차분 격자상에서 계산되며 유속 및 수온의 연직구조는 선형보간함수를 사용하여 계산된다. 구성된 행렬방정식은 유사변환 개념을 도입하여 시간적분된다. 개발된 모델의 테스트를 위해 간단한 이상해역과 황해역에서 대기와 해양간의 열교환에 따른 수온구조 변동을 실험하였다. 이류효과는 열수송방정식에서만 고려하였으며 연직 와동점성계수와 와동확산계수는 시 공간적으로 일정한 값을 사용하였다. 이상해역에서의 수치실험결과 모델영역의 수심의 차이에 따른 열저장의 차이로 인해 수온의 수평적 구배가 발생하였다. 결과적으로 전향력을 고려하지 않을 경우에는 상층에서는 수심이 증가하는 방향으로 흐름이 발생하고 하층에는 반대방향의 흐름이 유도된 반면 전향력을 고려할 경우에는 수온차에 의한 압력구배력과 전향력이 균형을 이루면서 지형류가 뚜렷하게 나타났다. 황해역에서는 복잡한 흐름이 나타났지만 전체적으로는 지형류의 특성이 우세하게 나타났다.

  • PDF

Heat or radiofrequency plasma glow discharge treatment of a titanium alloy stimulates osteoblast gene expression in the MC3T3 osteoprogenitor cell line

  • Rapuano, Bruce E.;Hackshaw, Kyle;Macdonald, Daniel E.
    • Journal of Periodontal and Implant Science
    • /
    • 제42권3호
    • /
    • pp.95-104
    • /
    • 2012
  • Purpose: The purpose of this study was to determine whether increasing the Ti6Al4V surface oxide negative charge through heat ($600^{\circ}C$) or radiofrequency plasma glow discharge (RFGD) pretreatment, with or without a subsequent coating with fibronectin, stimulated osteoblast gene marker expression in the MC3T3 osteoprogenitor cell line. Methods: Quantitative real-time polymerase chain reaction was used to measure changes over time in the mRNA levels for osteoblast gene markers, including alkaline phosphatase, bone sialoprotein, collagen type I (${\alpha}1$), osteocalcin, osteopontin and parathyroid hormone-related peptide (PTH-rP), and the osteoblast precursor genes Runx2 and osterix. Results: Osteoprogenitors began to differentiate earlier on disks that were pretreated with heat or RFGD. The pretreatments increased gene marker expression in the absence of a fibronectin coating. However, pretreatments increased osteoblast gene expression for fibronectin-coated disks more than uncoated disks, suggesting a surface oxide-mediated specific enhancement of fibronectin's bioactivity. Heat pretreatment had greater effects on the mRNA expression of genes for PTH-rP, alkaline phosphatase and osteocalcin while RFGD pretreatment had greater effects on osteopontin and bone sialoprotein gene expression. Conclusions: The results suggest that heat and RFGD pretreatments of the Ti6Al4V surface oxide stimulated osteoblast differentiation through an enhancement of (a) coated fibronectin's bioactivity and (b) the bioactivities of other serum or matrix proteins. The quantitative differences in the effects of the two pretreatments on osteoblast gene marker expression may have arisen from the unique physico-chemical characteristics of each resultant oxide surface. Therefore, engineering the Ti6Al4V surface oxide to become more negatively charged can be used to accelerate osteoblast differentiation through fibronectin-dependent and independent mechanisms.

국제 BIM 표준계약서 분석을 통한 국내 BIM 저작권 보호 및 운용 체계 수립에 관한 연구 (Evaluation of International BIM Standard Contracts to establish BIM Copyrights and Operational Protocols in Korea)

  • 구본상;신병진
    • 한국건설관리학회논문집
    • /
    • 제17권6호
    • /
    • pp.24-30
    • /
    • 2016
  • BIM은 사업차여자간 협업을 요구하는 동시에 3차원 형상 정보와 더불어 개별 사업정보의 공유를 필요로 한다. 이에 따라 BIM 정보에 대한 소유 및 사용권한에 대한 지식재산권, 즉, 저작권 보호에 대한 체계적인 수립을 요한다. 현재 국내 표준계약서는 BIM 정보에 대한 보호를 담기엔 한계가 있다. 본 연구에서는 미국 및 영국의 주요 BIM 표준계약서를 분석하여 이를 토대로 국내 실정에 맞는 법률적 조항과 운용 방식을 추려내었다. 그 결과 소유권은 저작자; 사용권은 라이선스 서브라이선 방식으로 부여, 취소권한을 주되 사업차질에 최소화하는 선에서 제공, 그리고 데이터오류에 대한 책임 역시 최소화함을 명시할 것을 제안한다. 또한 통합 빔 모델은 연합모델로 구축하고 사업진행중 모델 책임자 및 상세수즌을 사전적으로 합의할 수 있는 책임 메트릭스를 제공할 것을 권유한다.

이중 선택적 채널 OFDM 시스템에서 시간 영역 윈도우와 검출 순서가 순차적 간섭 제거에 미치는 영향 (The Effects of Time Domain Windowing and Detection Ordering on Successive Interference Cancellation in OFDM Systems over Doubly Selective Channels)

  • 임동민
    • 한국전자파학회논문지
    • /
    • 제21권6호
    • /
    • pp.635-641
    • /
    • 2010
  • 이중 선택적 채널 OFDM(Orthogonal Frequency Division Multiplexing) 시스템에서 시변 채널 특성은 주파수 영역에서 부반송파 사이의 간섭 현상으로 나타난다. 시간 영역 윈도우의 사용은 주파수 영역 채널 행렬의 대역폭을 한정시키는 효과가 있으며, OFDM 시스템을 간략화된 선형 입출력 모델로 근사화시킬 수 있다. OFDM 시스템의 채널 등화에 선형 MMSE(Minimum Mean Square Error) 예측에 기반한 순차적인 간섭 제거 기법을 사용하는 경우, 심볼의 검출 순서가 전체적인 시스템 성능에 큰 영향을 미친다. 본 논문에서는 시간 영역 윈도우의 사용으로 인한 잔류 ICI의 감소와 이에 따른 성능 개선 효과를 확인하고, SINR(Signal to Interference and Noise Ratio)과 CSEP(Conditional Symbol Error Probability) 값을 기준으로 하는 심볼 검출 순서가 순차적 간섭 제거 방식의 성능에 미치는 영향을 조사한다.

은 카바메이트 복합체를 이용한 라디칼 중합에 의한 은/폴리스티렌 나노복합체의 제조 (Preparation of Silver/Polystyrene Nanocomposites by Radical Polymerization Using Silver Carbamate Complex)

  • 박헌수;박형석;공명선
    • 폴리머
    • /
    • 제34권2호
    • /
    • pp.144-149
    • /
    • 2010
  • Ag/polystyrene(PS) 나노복합체를 110 $^{\circ}C$의 가열법에 의하여 silver 2-ethylhexylcarbamate(Ag-CB) 복합체의 환원과 동시에 라디칼 중합을 진행하여 제조하였다. 또한, 이러한 전통적인 가열법과는 대조적으로 마이크로파를 조사하여 스티렌 단량체의 중합이 진행됨이 없이 은 나노입자가 잘 분산된 콜로이드 스티렌 용액을 제조할 수 있었다. 이렇게 단지 마이크로파를 조사하여 은 나노입자를 제조하는 방법은 반응기 내의 전체 용액 속에서 균일하고 빠르게 진행되어 매우 입자가 작고 균일한 은 나노콜로이드 용액을 제조할 수 있었다. 또한, 연속적으로 얻어진 은 나노입자를 포함하는 단량체 용액을 라디칼 중합시킴으로써 PS 고분자 매트릭스에 은 나노입자가 잘 분산된 Ag/PS 나노복합체를 얻을 수 있었다. Ag/PS(0.1/100) 나노복합체는 Ag/PS(4.0/100)를 마스터배치로 사용하여 용융-혼합 방법에 의하여 성공적으로 제조할 수 있었으며 그러한 나노복합체를 UV-VIS spectroscopy, TEM, 그리고 XRD를 이용하여 확인하였다.

직사각형 다중 양자 우물 도파관의 모드특성 분석 : Scanning angle method를 사용한 새로운 접근 (Modal Analysis of Rectangular MQW Waveguide : A Novel Approach using Scanning Angle Method)

  • 임연섭;최영완
    • 대한전자공학회논문지SD
    • /
    • 제37권4호
    • /
    • pp.45-52
    • /
    • 2000
  • 본 논문에서는 직사각형 다중 양자 우물 광 도파관의 간단하고 효율적인 분석을 위한 새로운 모의 실험방법을 제시한다. 우선적으로 2 차원 도파관 구조는 유효 굴절률 법을 사용하여 1 차원 도파관 구조로 변형되고 이렇게 얻어진 등가의 평면 다중 양자 우물 도파관의 도파 특성 행렬은 새롭게 제시된 각도 스캔법(scanning angle method)에 의하여 분석된다. 직사각형 다중 양자 우물 도파관의 유효 굴절률, 모드 전장세기, 광 구속 인자는 이 방법을 사용하여 효율적으로 얻을 수 있다. 모의 실험결과는 유한 요소 법에 기초된 해와 거의 정확한 일치를 보인다. 또한 직사각형 다중 양자 우물 도파관의 분석을 위한 두 가지의 근사 해석 방식을 새롭게 도입하고 그 방식들의 유효성을 검증하였다. 퍼터베이션 분석(perturbation analysis)을 사용하여 직사각형 다중양자 우물 도파관에서 전송되는 모드의 전력 손실 계수를 새롭게 유도하고 평면 다중 양자 우물 도파관 근사를 사용한 전형적인 방법의 결과와 비교하였다.

  • PDF

STD 11 강의 오스테나이트화 온도에 따른 제 특성의 정량 분석 (Quantitative Analysis of Metallographic Characteristics with Austenitizing Temperature in STD 11 Steel)

  • 김조은;주용후;장우양
    • 열처리공학회지
    • /
    • 제30권5호
    • /
    • pp.215-221
    • /
    • 2017
  • The effect of austenitizing temperature on the degree of carbides re-solutionizing, mean graine size, hardness and the volume fraction of retaind austenite ($V_{\gamma}$) etc., has been studied by means of metallography, X-ray diffractometry and hardness measurement in STD 11 tool steel. As austenitizing temperature increases, the amount of alloying elements which is re-dissolved into matrix increases, resulting in increase of $V_{\gamma}$, due to the chemical stabilization of austenite. The Vickers hardness value decreases with increasing austenitizing temperature, which is attributed to grain size as well the volume fractions of $V_{\gamma}$ and carbides. Theoretical diffraction intensity of (200) ${\alpha}^{\prime}$, (211) ${\alpha}^{\prime}$ (200) ${\gamma}$ and (220) ${\gamma}$ peaks obtained by $CuK_{\alpha}$ chracteristics X-ray (${\lambda}=0.15429nm$) was calculated, and quantitative analysis of $V_{\gamma}$ could be carried out by X-ray diffraction method. The resultant value is well coincided with the value obtained by image analysis method. When the quenched specimen is tempered above $200{\sim}400^{\circ}C$ for 30 min, the transition carbides i.e., MC and $M_2C$ in the size of about 20 nm begin to precipitate at $300^{\circ}C$.

가우스 괄호법을 이용한 무한 물점을 갖는 복잡한 줌 렌즈의 수치해석적인 근축광선 줌 궤적 추적법 (Numerical Calculation Method for Paraxial Zoom Loci of Complicated Zoom Lenses with Infinite Object Distance by Using Gaussian Bracket Method)

  • 유남준;김원섭;조재흥;류재명;이해진;강건모
    • 한국광학회지
    • /
    • 제18권6호
    • /
    • pp.410-420
    • /
    • 2007
  • 가우스 괄호법을 이용하여 카메라 렌즈와 같이 무한 물점을 대상으로 하는 모든 복잡한 줌 렌즈에서 사용가능한 근축광선 줌 궤적 추적식을 이론적으로 유도하였다. 그리고 이를 Visual Basic으로 프로그램화하여 수치해석적으로 줌 궤적을 구하였다. 이 방법은 근축광선 추적식을 가우스 괄호법에 적용시켰기 때문에 다양한 줌 형태에 따른 구속조건의 공식을 매우 간편하고 알기 쉽게 단순화시켜준다. 이 결과 이 식의 해는 모든 종류의 줌 렌즈에서 줌 궤적에 대한 초기설계에 유연하면서 통합적으로 적용할 수 있다. 이 식의 유용성을 증명하기 위하여 4군과 5군의 매우 복잡한 줌 렌즈계의 줌 궤적을 다양한 보간법으로 빠르게 산출해 낼 수 있음을 보였다.