• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.1
• /
• pp.1-8
• /
• 2023

At construction sites, interest in the production of precast materials is increasing due to off-site conditions due to changes in construction site conditions due to increased labor costs and the Act on the Punishment of Serious Accidents. In particular, the precast prestressed hollow slab has a hollow shape in the cross section, so structural performance is secured by reducing weight and controlling deflection through stranded wires. With the application of structural standards, the urgency of securing fire resistance performance is emerging. In this study, a fire-resistance cross section was developed by reducing the concrete filling rate in the cross section and improving the upper and lower flange shapes by optimizing the hollow shape in the cross section of the slab to have the same or better structural performance and economic efficiency compared to the existing hollow slab. The PC hollow slab to which this was applied was subjected to a two-hour fire resistance test using the cross-sectional thickness as a variable, and as a result of the test, fire resistance performance (load bearing capacity, heat shielding property, flame retardance property) was secured. Based on the experimental results, it is determined that fire resistance modeling can be established through numerical analysis simulation, and prediction of fire resistance analysis is possible according to the change of the cross-sectional shape in the future.

• Journal of the Korean Geosynthetics Society
• /
• v.22 no.3
• /
• pp.37-46
• /
• 2023

In this paper, the physical properties, stress deformation and strength characteristics, density and permeability characteristics of silty sand (SM) by fines content were analyzed through indoor tests. also based on the results of the indoor tests, a compact analysis was performed according to the content of SM, and the applicability of SM ground to the compacted target layer was evaluated by comparing it with the measurement data of the actual problem site. As a result of indoor tests and compression analysis, SM changed its mechanical properties from sandy soil to viscous soil when the fine particle content was 35% or higher, and using field measurement data, SM was found to have a higher compression tendency than direct subsidence. Therefore, the mechanical characteristics of SM above Fc 35% are considered to be similar to that of viscous soil, which is different from the compression characteristics of the tendency of immediate subsidence to conventional sandy soil, so it is necessary to present the mechanical characteristics of SM through further research. The research findings highlight the importance of considering consolidation settlement in silty sand (SM) when evaluating soft soil conditions. These findings can aid in revising criteria for assessing weak ground conditions by providing essential engineering property data based on varying fines content in silty sand.

• Journal of Korea Entertainment Industry Association
• /
• v.13 no.1
• /
• pp.25-34
• /
• 2019

The purpose of this study is to develop a mobile app for mental health self care of university student. User centered design is a research design that applies the subject's needs assessment, analysis, design, development, evaluation, modification and supplement to suit the subjects. In order to manage the mental health of university students, they consisted of four main areas of mental health problems: drinking, sleeping, depression, and stress. It is designed to enable self test content, analysis and notification of inspection results, and management plan for current status of each area. Based on this, I developed an Android based mental health self-care Application. The subject can enter his or her mental health status data to explain the normal or risk level for each result, and the subject can then select the appropriate intervention method that he or she can perform. In addition, we developed a mental health self care calendar that can display the present status of each of the four areas on a day by day basis, and the current status can be expressed in an integrated manner through animations and status bars. The purpose of this study was to develop a mental health self-care app that can be improved by continuous and improved programs.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.5
• /
• pp.523-528
• /
• 2023

The applicability as a material to improve solar cell performance was reviewed by synthesizing a phosphor that emits red wavelengths by a liquid synthesis method using a metal salt aqueous solution and a polymer medium as a starting material. An aqueous solution was prepared using nitrate of metals such as Ca, Zn, Al, and Eu, and a precursor impregnated with starch, a natural polymer, was sintered to synthesize CaZnAlO:Eu phosphor powder. The surface structure and composition analysis of the synthesized CaZnAlO:Eu phosphor powder were analyzed by scanning electron microscope(SEM) and energy-dispersed X-ray spectroscopy(EDS). The crystal structure of CaZnAlO:Eu phosphor particles was analyzed by an X-ray diffraction analyzer (XRD). As a result of measuring the photoluminescence(PL) characteristics of the phosphor, it was confirmed that a red phosphor with a light emitting wavelength of 650-780nm was successfully synthesized. According to SEM and EDS analysis, the synthesized Ca₁₄Zn₆Al_9.93O₃₅:Eu³⁺_0.07 phosphor powder has a uniform particle size, and Eu ions used as an activator are present. The synthesized CZA:Eu³⁺ phosphor can be used as a material that can increase the light absorption efficiency of the solar cell by converting ultraviolet or visible light down conversion into a wavelength in the near-infrared region.

• Journal of the Society of Disaster Information
• /
• v.19 no.4
• /
• pp.826-833
• /
• 2023

Purpose: We suggest the need to utilize ESG in the safety field to prevent serious industrial accidents. Method: The Serious Accident Punishment Act, a strong serious accident prevention system, was reviewed through a review of previous research. And through comparative analysis of serious accident data from the United States and Korea, the main causes of accidents in the domestic chemical industry were derived. Result: It was determined that there was a need to induce voluntary safety management by companies through ESG management along with the Serious Accident Punishment Act, which aims to prevent corporate accidents. Through statistical analysis of accident data, it was confirmed that the scale of damage and number of deaths in domestic accidents was greater than in the United States. The reason was interpreted to be that there are many accidents caused by human causes in the country. Conclusion: In order to compensate for the lack of voluntariness in corporate safety management as well as the Serious Accident Punishment Act and encourage active safety management, the proportion of 'ESG safety evaluation' must be expanded. By using ESG as an indirect social sanction, we can expect companies to voluntarily and actively manage safety and expand safety investments in the safety field.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.195-202
• /
• 2016

The government has run and managed various forms of direct payment systems, such as the paddy and field direct payment, to ease the instability of farm incomes with respect to market opening, and preserve farm income. Direct payments to the agricultural sector is a center in the key policy instrument that plays an important role in income stabilization. Despite the large amount of spending in the farm unit, the status of direct payment, and policy effects the analysis of direct payments, such as stability of income contribution, are insufficient. This paper, using the farm unit DB in 2014 and 2015, performed farm level analysis of direct payment, and derived the implications of the performance evaluation system. As a result, the distribution of direct payment showed considerable bias to the left side compared to the normal distribution curve. Approximately half of the farms (49.3%) in 2014 DB should receive below 100,000 won per year by a direct payment. A larger-scale farm showed a significantly increased income effect and income stabilizing effect because direct payments make higher contributions to farm income in proportional to the area. In the more elderly farmers, a high contribution by direct payment to farm income was found to be an advantage; however, in small-scale farms of less than 0.5ha, direct payment contribution on farm household income was only 3%. In large-scale farms, 10ha or more, the contribution to farm income were found to be 29.4%. The income of large farms was 10 times larger than small farmers, and the direct payment entitlements that were received were 110 times larger. Through this policy, direct payments are required for future improvements and modifications.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.4
• /
• pp.2217-2224
• /
• 2014

This paper deals with system development which measures 12 channel ECG using medical analog front end(AFE) and discriminates arrythmia through signal analysis. Recently, occurrences of cardiac arrest have been increased. So the need of system that diagnoses an arrythmia which results in cardiac arrest is increasing. There are some drawbacks of conventional 12 channel ECG system that it occupies bulk and consists of complicated circuit. To improve those, we made up the system composed of medical AFE, algorithm for discriminating arrythmia and DSP for signal processing. This system can be monitored 12 channel ECG waveforms and the discriminant analysis result of arrhythmia through 7" LCD and received the input through touch pannel. In this study, we conducted normal operation test about output signal of ECG simulator(normal/abnormal ECG signal) to verify the implemented system and performance evaluation of the optimization process for applying arrhythmia algorithm to an embedded environment.

• The Korean Journal of Pesticide Science
• /
• v.17 no.4
• /
• pp.271-282
• /
• 2013

This is the result of pesticide residue monitoring certified Good Agricultural Practice (GAP) by national agricultural cooperative federation (NACF) from 2009 to 2012. NACF evaluated simultaneously 283 pesticide multi-analysis method with GC (ECD, NPD) and HPLC. 6,590 agricultural products were analyzed in this period. As the results 1) detected 20.27% in 2009, 23.42% in 2010, 28.07% in 2011 and finally 31.75% in 2012, respectively. There was the total detected pesticide residue in the agricultural products. The violated ratio of agricultural products were 2.25% in 2009, 1.82% in 2010, 1.67% in 2011 and 3.47% in 2012, respectively. 13 pesticides went over the maximum residue limits (MRLs); carbendazim was the predominant violation. 40 pesticides; endosulfan was the predominant detected pesticide did not registered respectively crops in Korea. Most agricultural products that were under the MRLs met the safety standard, however agricultural products that contain neither registered nor set up MRL any level for example endosulfan in strawberry. Agricultural products that go over the MRLs with permitted pesticides, for example carbendazim in apple, are rejected. Because of these intricacies continual observation and evaluation will be need during GAP agricultural cultivation.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.65 no.4
• /
• pp.365-376
• /
• 2020

Immature embryogenesis is a useful process in wheat tissue culture, including transgenic technology, because of its high regeneration efficiency compared to that in other tissues. However, it is a very labor-intensive and time-restrictive method, because the preparation of immature embryos is limited to the optimal time after flowering. In this experiment, 'Speed Breeding', a breeding technique that accelerates breeding generation advancement by extending the photoperiod, was applied to the wheat variety 'Bobwhite'. A controlled growth room was constructed by adjusting the photoperiod (22-hour light/2-hour dark) using LED lights at temperature of 22℃. After vernalization of the Bobwhite seeds at 4℃ for 4 weeks, the seedlings were grown in a controlled growth room and a greenhouse to compare the heading date. In both conditions, calli were induced from immature embryos on the 11^th day after flowering. After 4 weeks, the calli were transferred to a regeneration medium. Regeneration efficiencies under greenhouse conditions and Speed Breeding conditions were determined as 45.05% and 43.18%, respectively. Antioxidant enzyme activity and reference gene expression analysis were performed to confirm the presence of stress due to an extremely long-day photoperiod. As a result, the antioxidant enzyme activity was not distinguished from that of the greenhouse condition. The reference gene expression analysis revealed that the PsaA and CDC genes were highly expressed under the Speed Breeding condition. However, expression of PsbA was similar expression in both conditions. These results will provide useful information for the application of immature embryogenesis to the wheat transformation system.

• Journal of Korean Society of Steel Construction
• /
• v.29 no.6
• /
• pp.467-477
• /
• 2017

The live load effect of KL-510 of the current Korean bridge design code is examined by comparing with that of the multiple trucks of which the weights are statistically estimated from measured traffic data as well as with those of the related live load models. The truck weight data measured on the expressway before and after overweight enforcement are used to obtain the truck weights following the same procedures in deciding the live load model of the design codes and the results are compared with the load effect of KL-510. KL-510 yields a very uniform loading effect compared with the multiple truck effects when the weights are estimated from the data which contains some of the heavy trucks over the operational weight limit. KL-510 yields consistent results with the live load of AASHTO LRFD and shows less variation than the past load model DB-24 over the span lengths considered in this study. As a result of this research, the actual truck combinations equivalent to the notional KL-510 load model are constructed and it can be applied to the evaluation of the existing bridge and the calibration of the load factor of the permit vehicle.