• Journal of Cadastre & Land InformatiX
• /
• v.47 no.2
• /
• pp.39-47
• /
• 2017

The SAR payload of the KOMPSAT-5 is equipped with an X-band (9.66GHz) microwave-based sensor. Especially, since it has a fixed antenna that can be electronically steered with respect to the azimuth and elevation planes, various applications are expected. This study evaluates the production performance and the accuracy of the DEM by producing DEM using the HR and UH mode images of KOMPSAT-5. To evaluate the production performance of the DEM, the sensitivity of DEM was assessed through a baseline analysis and $2{\pi}$ ambiguity; it was found to have good production performance. In addition, to evaluate the accuracy of the produced DEM, 30 check points were compared with SRTM data. As a result, STDEV ${\pm}15-20m$ accuracy was obtained. If the accuracy of the DEM is improved by adjusting the parameters of the filtering method or phase unwrapping method in the future, it will be possible to widely use the KOMPSAT-5 image for environmental and disaster monitoring.

• Journal of Digital Convergence
• /
• v.15 no.3
• /
• pp.295-300
• /
• 2017

The purpose of this study is to analyze the EBS special lecture, which is an educational application, from a user 's point of view and to propose a direction for improvement of the user experience according to the GUI design. Firstly, we surveyed the theoretical background and service situation through literature review, and secondly, we surveyed the user experience questionnaire based on 7 principles of honeycomb model of Peter Morville. As a result, the EBS special lecture showed improvement of GUI due to lack of visual part in addition to its use. Based on this research, I hope that the service for improvement of the user experience of the education application will be improved in the future and it will be helpful to study the educational application user experience to be conducted in the future.

• Journal of the Korean Vacuum Society
• /
• v.12 no.2
• /
• pp.93-104
• /
• 2003

For evaluation of durability of low vacuum pumps, it is required to examine the performance and degradation of low vacuum pumps. Pump degradation may result from abnormalities associated with the performance in many areas of pump operation. The diagnostics method can be used to monitor the pump performance in the semi-conductor process line. Based on the mechanical defect of the pump, the dynamic response and reliability of the system for performance test, and the dynamic characteristics of the pump were experimentally assessed. The theoretical work rate for the compression process in the pump was calculated, and then the efficiency of the pump associated with the power consumption was evaluated. This analysis will be useful in detecting pump degradation with increasing the power consumption. To determine the predominant factors of pump degradation, it is important to evaluate the entire pumping system. We studied vibration, dynamic pressure, pumping speed, and power consumption of low vacuum pumps. Our results can be utilized for the future research on the evaluating technology of durability of low vacuum pumps.

• Spatial Information Research
• /
• v.14 no.2 s.37
• /
• pp.223-234
• /
• 2006

In order to examine spatio-temporal characteristics of coastal water quality, we applied GIS spatial analysis to the water quality data collected from observation points located on Korean coastal area during 1997$\sim$2004. The water quality parameters measured included: chlorophyll-a, pH, DO, COD, SS, dissolved inorganic nitrogen, dissolved inorganic phosphorous, salinity, temperature. The water quality data used in this paper was obtained only at selected sites even though they are potentially available at any location in a continuous surface. Thus, it is necessary to estimate the values at unsampled locations so as to analyze spatial distribution patterns of coastal water quality, Owing to this reason, we applied IDW(inverse distance weighted) interpolation method to water quality data and evaluated the usefulness of IDW method. After IDW interfolation method was applied, we divided the Korean coastal area into 46 sections and examined spatio-temporal patterns of each section using GIS visualization technique. As a result of evaluation, we can blow that IDW interpolation and GIS are useful for understanding spatial and temporal distribution characteristics of coastal water quality data which is collected from a wide area far many years.

• The Journal of the Korea Contents Association
• /
• v.13 no.4
• /
• pp.389-398
• /
• 2013

This study aims to support rational security investment decision making through prioritizing on operational level of management measures strategically, in carrying out industrial security activities. For this, AHP survey is conducted against industrial security professionals and analyzed. Thereafter, the importance and the priority of industrial security management measures are determined. As a result, in a comparison evaluation among the criteria, 'ICT service management' represents the highest weight (0.54). And the sub-criteria could be divided into three groups (Group I, II, III), depending on their importance. The sensitivity analysis results show that if the weight of the criterion, 'ICT systems/networks access control' is doubled, the sub-criteria, 'O/S access control', 'application access control', and 'wired/wireless network access control' are enter into top rank group. In case of the criterion, 'physical/environmental security' is doubled, the sub-criteria, 'protection zoning/access control' and 'disaster prevention on business equipment/counter-terrorism' are enter into the top rank group, 'securing utilities' is enter into the mid rank group.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.9 no.1
• /
• pp.197-204
• /
• 2005

Multipurpose Floor Level Joint(MFLJ) is a new construction technology system which was developed in domestic. By using this system, it is possible not only to absorb the deformation at expansion joint due to shrinkages of concrete but also to make ease the floor leveling during the concrete casting at floor. The system consists of two elements, supporting devices and rails. Their structural capacities were verified through several experimental programs, such as compressive strength test of support and bending test of rail. The purpose of this paper is to evaluate the deformation absorbing capacity of the floor level joint. An experimental work was carried out to simulate the deformation condition at the joint and the test result was analyzed and evaluated. In addition, FEM analysis for expansion joint of typical building was also performed to predict the real behavior of MFLJ. The test results showed that MFLJ has sufficient deformation capacity required to act as expansion joint.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.3 s.35
• /
• pp.275-286
• /
• 2005

Interest of Business Model has been increased continuously in the enterprise ever since IT(Information Technology) is introduced in the Business sector. Though lots of company's effort to build Business Model which expected to give profit to company, there are no guarantee of Business Model's success. In the situation of shortest lifecycle of new technology, it's hard to guarantee Business Model based new technology will return profit with the result of excellent evaluation of technology. After find Timmers model, Julta model, Rappa model, Electronic Commerce Profit model, B2E Model and Affliation, Affliated B2E Business Frame, will propose advantage and disadvantage of these models. Comraded B2E Business Model will be extracted for Mobile Solution Company to achieve success in the market through analysis of relationship between Technology appraisal and business model.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.4
• /
• pp.421-430
• /
• 2010

Image segmentation technique is becoming increasingly important in the field of remote sensing image analysis in areas such as object oriented image classification to extract object regions of interest within images. This paper presents a new method for image segmentation in High Resolution Remote Sensing Image based on Improved Seeded Region Growing (ISRG) and Region merging. Firstly, multi-spectral edge detection was done using an entropy operator in pan-sharpened QuickBird imagery. Then, the initial seeds were automatically selected from the obtained multi-spectral edge map. After automatic selection of significant seeds, an initial segmentation was achieved by applying ISRG to consider spectral and edge information. Finally the region merging process, integrating region texture and spectral information, was carried out to get the final segmentation result. The accuracy assesment was done using the unsupervised objective evaluation method for evaluating the effectiveness of the proposed method. Experimental results demonstrated that the proposed method has good potential for application in the segmentation of high resolution satellite images.

• School Mathematics
• /
• v.19 no.3
• /
• pp.571-591
• /
• 2017

The purpose of this study is to understand the characteristics of mathematical discourse about the length in the class that learns the length of the curve defined by definite integral. For this purpose, this study examined the discourse about length by paying attention to the usage of the word 'length' in the class participants based on the communicative approach. As a result of the research, it was confirmed that the word 'length' is used in three usages - colloquial, operational, and structural usage - in the process of communicating with the discourse participants. Particularly, each participant did not recognize the difference even though they used different usage words, and this resulted in ineffective communication. This study emphasizes the fact that the difference in usage of words used by participants reduces the effectiveness of communication. However, if discourse participants pay attention to the differences of these usages and recognize that there are different discourses, this study suggests that meta - level learning can be possible by overcoming communication discontinuities and resolving conflicts.

• Archives of design research
• /
• v.19 no.2 s.64
• /
• pp.251-260
• /
• 2006

Rapid development of electronic technology has made it possible to perform various function. But this technology made it increase it's complexity. Therefore, It was important to identify usability problem in interface design. The quality of interface to promote the efficient interaction should be evaluated with regard to users' cognitive characteristics. So, in this paper, washing machine, that is one of the most useful electronic home application was studied menu structure on interface and it's operational states transition. At first, an cognitive menu structure is identified with users' conceptual similarity of the main function of washing machine. Then three washing machines was selected to compare with the cognitive menu structure. And, we were analyzed how operational state of the washing machine was transfered. As a result, we can be revealed that menu operational method based on the cognitive structure was consistent with the user's preferred operational method during the experimental tasks and the users and designers had a different knowledge of an it's function structure. These results will be useful to design the washing machine interface.