• Title/Summary/Keyword: Result Analysis and Evaluation

Search Result 5,763, Processing Time 0.037 seconds

An Analysis of Landscape Change Factors on Restoration Project of Ecological Ridgeline using Landscape Adjectives -Focused on Frontal View- (경관형용사를 활용한 생태축 복원사업의 경관변화요인 분석 - 정면경관을 대상으로-)

  • Lee, Woo-Sung;Park, Yeong Dae;Kwon, Tae-Ho
    • Journal of the Korean Society of Environmental Restoration Technology
    • /
    • v.20 no.1
    • /
    • pp.97-115
    • /
    • 2017
  • The purpose of this study is to evaluate the preference and image on landscape of before and after the restoration in the four study areas where the restoration project of Baekdudaegan ecological ridgeline was carried out and to explore the change factors of image preference according to restoration project. The study areas were Beoljae, Ihwaryeong, Bijoryeong, and Yuksimnyeong and 248 questionnaires were used for analysis. As a result of the recognition analysis on restoration project of ecological ridgeline, the awareness of the project was low at 2.63, the satisfaction of the project was 3.42, and necessity of the project was 4.07. In terms of the preference analysis for landscape photographs, the all preferences of four sites were improved after the project than before. In the result of the landscape image evaluation, images such as 'lifeless', 'uniform' and 'ugly' were high before the project, however, images such as 'clean', 'tidy', and 'stable' were high after the project. As a result of analyzing the change factors of image preference according to the restoration project, adjectives such as 'beautiful-ugly' and 'open-closed' influenced the preference change in common. These findings can be utilized as the base data for the planning direction for the construction of new ecological ridgeline or the landscape conservation of existing ecological ridgeline.

A study on the clinical utility of voiced sentences in acoustic analysis for pathological voice evaluation (장애음성의 음향학적 분석에서 유성음 문장의 임상적 유용성에 관한 연구)

  • Ji-sung Kim
    • The Journal of the Acoustical Society of Korea
    • /
    • v.42 no.4
    • /
    • pp.298-303
    • /
    • 2023
  • This study aimed to investigate the clinical utility of voiced sentence tasks for voice evaluation. To this end, we analyzed the correlation between perturbation-based acoustic measurements [jitter percent (jitter), shimmer percent (shimmer), Noise to Harmonic Ratio (NHR)] using sustained vowel phonation, and cepstrum-based acoustic measurements [Cepstral Peak Prominence (CPP), Low/High spectral ratio (L/H ratio)] using voiced sentences. As a result of analyzing data collected from 65 patients with voice disorders, there was a significant correlation between the CPP and jitter (r = -.624, p = .000), shimmer (r = -.530, p = .000), NHR (r = -.469, p = .000).This suggests that the cepstrum measurement of voiced sentences can be used as an alternative to the analysis limitations of the pathological voice such as not possible perturbation-based acoustic measurement, and result difference according to the analysis section.

A Study of Automatic Medical Image Segmentation using Independent Component Analysis (Independent Component Analysis를 이용한 의료영상의 자동 분할에 관한 연구)

  • Bae, Soo-Hyun;Yoo, Sun-Kook;Kim, Nam-Hyun
    • The Transactions of the Korean Institute of Electrical Engineers D
    • /
    • v.52 no.1
    • /
    • pp.64-75
    • /
    • 2003
  • Medical image segmentation is the process by which an original image is partitioned into some homogeneous regions like bones, soft tissues, etc. This study demonstrates an automatic medical image segmentation technique based on independent component analysis. Independent component analysis is a generalization of principal component analysis which encodes the higher-order dependencies in the input in addition to the correlations. It extracts statistically independent components from input data. Use of automatic medical image segmentation technique using independent component analysis under the assumption that medical image consists of some statistically independent parts leads to a method that allows for more accurate segmentation of bones from CT data. The result of automatic segmentation using independent component analysis with square test data was evaluated using probability of error(PE) and ultimate measurement accuracy(UMA) value. It was also compared to a general segmentation method using threshold based on sensitivity(True Positive Rate), specificity(False Positive Rate) and mislabelling rate. The evaluation result was done statistical Paired-t test. Most of the results show that the automatic segmentation using independent component analysis has better result than general segmentation using threshold.

Evaluation of a Tuberculosis Control Program at Community Health Centers (보건소 결핵관리사업 평가)

  • Hwang, Eun-Jeong
    • Journal of Korean Public Health Nursing
    • /
    • v.21 no.2
    • /
    • pp.241-251
    • /
    • 2007
  • Purpose: To identify the effects on tuberculosis mortality of a tuberculosis control program conducted at 108 community health centers in terms of structure and process. Methods: The dependent variable was tuberculosis mortality, and the independent variables were the structure(type of centers, staff, nurses, doctors, budget) and process(chest X-ray checking, immunization, case detection, health education, patients registering & managing) of the tuberculosis control programs at the community health centers. Data were analyzed using descriptive analysis and stepwise regression analysis. Result: Tuberculosis morality was positively correlated with type of centers(rural area)(p<0.01), but negatively correlated with type of centers(large cities) (p<0.01), (middle cities)(p<0.05), staff FTE(p<0.05), and number of nurses(p<0.05). Regression analysis indicated that type of centers(rural area)($\beta$=0.457) and case detection($\beta$=0.234) had a significant effect on tuberculosis mortality. Conclusion: Ultimately, this study will provide information to improve the effectiveness of tuberculosis control programs in community health centers.

  • PDF

A Study on Development of Power Supply for High Frequency Induction Heating (고주파 유도가열용 전원장치의 개발에 관한 연구)

  • Lee, Bong-Seob
    • Journal of the Korean Society of Industry Convergence
    • /
    • v.5 no.3
    • /
    • pp.179-186
    • /
    • 2002
  • This paper proposed LC resonant current fed high frequency inverter for high frequency induction heating using leakage inductance of transformer and, its described operating principle. The analysis of circuit presented by using normalized parameter in considering leakage inductance of transformer and, discussed characteristic evaluation of inverter circuit in detail. The proposed inverter is operating ZVS to reduce turn-on and turn-off loss of switching devices so, raised an efficiency. And, the experimental apparatus was made on base characteristic evaluation of theoretical analysis to discuss possibility on high frequency source and confirmed a rightfulness theoretical analysis. A result of study, the proposed inverter is higher utilizing factor using on leakage inductance of transformer and show possibility, which is application on high frequency power system.

  • PDF

Reliability Analysis and Improvement Plan for Evaluation of Program Outcomes among Demand-driven Raters (프로그램 학습성과 평가에 대한 수요지향 평가자 간 신뢰도 분석 및 개선 방안)

  • Lee, Youngho;Shin, Younghak;Kim, Jonghwa
    • The Journal of the Korea Contents Association
    • /
    • v.21 no.3
    • /
    • pp.410-418
    • /
    • 2021
  • In a program that runs an engineering education certification, program outcomes refer to the knowledge, skills, and attitudes a student must have until graduation. In general, capstone design is used as a tool for evaluating program outcomes. This paper applies the intraclass correlation coefficient (ICC) to measure the raters' reliability in assessing program outcomes. Several raters evaluate program outcomes, and the result is used to obtain the raters' ICC. ICC measures the reliability of ratings or measurements for clusters - data that has been collected as groups or sorted into groups. If the ICC is close to 1, it means that the reliability among the raters is high. We evaluated the proposed method's usefulness through case analysis. As a method for assessing an evaluation tool's objectivity, multiple raters measure the same evaluation tool. As a result, we measured the ICC values for all POs, and analyzed the cause for the low measured POs. We applied this method to evaluate program outcomes of the Department of Computer Engineering in the past two years. As a result, we derived guidelines for improvement and program outcomes.

The Study on the Management and Application through Analysis of Actual Condition of Palustrine Wetland in Rural Area (농촌마을 소택형습지 실태 분석을 통한 관리 및 활용방안 연구)

  • Kang, Bang-Hun;Son, Jin-Kwan;Kim, Mi-Heui;Kim, Nam-Choon
    • Journal of Korean Society of Rural Planning
    • /
    • v.16 no.3
    • /
    • pp.103-115
    • /
    • 2010
  • This study was accompanied to develop the management and application plans as resources for rural tourism through the analysis of distribution characteristics, inhabitants' practical use, need item for management and application, and aesthetic/recreation function of Palustrine wetland in rural area. The 2.3 Palustrine wetland per farm village were located, and 77.5% of total wetland was used by agricultural water, landscape, rural tourism The management and water quality were steadily getting better in used wetland than in unused wetland. Also, 91.8% of respondents answered that there is a practical use plan afterward, and much preferred the mode of ecotourism through restoration of ecological wetland. As the results from the appropriateness evaluation of management and application in used wetland for ecotourism, improvement item was required in observation deck, entrance lane, guidance facilities etc. And, insufficient result was deduced in appropriateness of operation program and special learning course, and in participation of inhabitants and experts. The result of evaluation of the aesthetic and recreation functions generally appeared high, but the need improvement item was required in artificial water wall and plantation base that deteriorate biological diversity. These results will be used to data for conservation, management and practical use of wetland, an important natural resource in farm village, which are confronted in crisis of land reclamation by use reduction of use and false management.

A Study on Design Guideline of Cyber Chatting System based on Usability Evaluation (사이버 채팅 시스템의 사용성 평가를 통한 사용자 인터페이스 설계 지침에 관한 연구)

  • 전대인;박정순
    • Archives of design research
    • /
    • v.14 no.1
    • /
    • pp.35-46
    • /
    • 2001
  • Recently varieties of user groups are formed as the number of people using cyber chatting gets increased and there are many changes in the range and field of its use. But because most of the cyber chatting systems are being operated to enlarge the additional sonics use, the using environments are stereotyped. And as its function is being various as well, it can not provide with a user-centered environment. So this thesis compares and analyzes the problems derived from the usability evaluation for solving the problems in using cyber chatting systems, and presents the guidelines of emotion-intended user interface design for improving the usability as the result of the analysis. First, this study investigates cyber chatting systems as a means of web communication tools through the existing literatures. Secondly, this study finds out the problems in using them through satisfaction evaluation, heuristic evaluation, performance evaluation, and observation evaluation and presents a way of solving the provisional problems in using them as the analysis of the result of usability evaluation. And this was proceeded for the purpose of applying and activating the better usability evaluation of cyber chatting systems later. Through the usability evaluation, it is found out that the structuralization of chatting function, the screen visibility by the size and arrangement of the compositional elements of a screen, and the improvement and development of the proper metaphor use of images and functions by the communication environment are necessary.

  • PDF

Liquefaction Evaluation by One-Dimensional Effective Stress Analysis Using UBC3D-PLM Model (UBC3D-PLM 모델을 이용한 1차원 유효응력해석에 의한 액상화 평가)

  • Jung-Hoe Kim;Hyun-Sik Jin
    • The Journal of Engineering Geology
    • /
    • v.33 no.1
    • /
    • pp.151-167
    • /
    • 2023
  • This study compares the revised method in loose saturated sandy ground where the LNG storage tank will be installed with an evaluation method by one-dimensional effective stress analysis using the UBC3D-PLM model. Various laboratory and field tests were conducted to establish the parameters necessary for evaluation. The revised liquefaction evaluation method using the seismic response analysis result and N value from standard penetration testing evaluated the possibility of liquefaction as high, but assessment using effective stress analysis, which can consider various liquefaction resistance factors, found the site to be somewhat stable against liquefaction. One-dimensional finite element analysis using UBC3D-PLM modeling facilitated easier assessment of stability against liquefaction than the other methods and minimized the area required for reinforcement against liquefaction. In addition, it is expected that two-and three-dimensional numerical analysis considering the foundation of the LNG storage tank can identify the seismic design and behavior when liquefaction occurs.

Construction of the Intelligence Stress Predictor for Compression Strength Evaluation (압축강도 평가를 위한 지능형 응력예측기 구축)

  • 박원규;우영환;이종구;윤인식
    • Transactions of the Korean Society of Machine Tool Engineers
    • /
    • v.10 no.6
    • /
    • pp.95-101
    • /
    • 2001
  • This work is concerned with construction of the intelligence stress predictor far compression strength evaluation using neural network-ultrasonic waves. The contact pressure in jointed plates was measured by using ultrasonic technique. Neural network is used to evaluate and predict contact pressure from the results of the calibration curves. The organized neural system was leaned with the accuracy of 99%, as a result of learning the ultrasonic echo ratio to the contact pressure measurement between SM45C and STS410 materials. And it could be evaluated and predicted with the accuracy of 90% in the evaluation of ultrasonic echo ratio difference in the same surface roughness and contact pressure, and 85% in the prediction of virtual ultrasonic echo ratio. Thus the proposed stress predictor is very useful for the evaluation and prediction of the contact pressure between SM45C and STS410 materials.

  • PDF