• Korean Journal of Soil Science and Fertilizer
• /
• v.12 no.1
• /
• pp.1-14
• /
• 1979

The fertility which is the combined factor is one of the important capability determiants of paddy soils. In this study, we aimed at attaining a quantitative evaluation of soil fertility and further establishing an objective fertility classification on the basis of the fertility evaluation. The samples used in this series studies were collected from Korean paddy field. They include deltas, flood plains, coastal plains, valley plains, fans and low terraces. On the basis of correlation analysis, factor analysis was applied to a set of 15 variables. As a result of factor analysis, five mutually independent and clearly definable fertility component factors were extracted from the 15 variables for the whole 90 surface soil samples. The fertility status of each sample soil could be objectively designated by the score of the five factors. As a means of summarizing the information obtained, taxonomic distances between all pairs of the samples were computed from these five factor scores further to be subjected to numerical taxonomy. Seven fertility groups were formulated, each of which was characterized by one or more of the fertility components. As this fertility classification was based on the present state of soil properties, it would be useful in pointing to the proper direction of further fertility amelioration and improvement for each group to enhance potential productivity of Korean paddy fields.

• Journal of The Korean Association of Information Education
• /
• v.24 no.1
• /
• pp.99-106
• /
• 2020

In this paper, we analyzed the units related to robot education in the Practical Arts textbooks according to the 2015 revised curriculum. As a result, all textbooks had a common system of introduction, development, and organization, and all of them showed a similar flow. Learning objectives were presented in all textbooks, but no affective goals were presented except cognitive and functional goals. The contents of robot learning suggest the meaning and type of robots, the structure and sensors of robots, and the activities of making robots, but the contents of robot ethics, the production and activities of various robot works, and the use of robots in the problem solving process are not presented. The assembly robot and the infrared sensor are used in common, and it consists of presenting robot production and control training materials in experience activities and arranging units through evaluation, and the A, C, and F textbooks also provide the unit auxiliary data. In the future, it will be necessary to include the contents of robot ethics education centered on the design/manufacturer and user-oriented robot ethics such as the recognition of the limits of robots, the principles of using robots correctly, safety education, personal information and privacy protection.

• Archives of Plastic Surgery
• /
• v.35 no.3
• /
• pp.255-260
• /
• 2008

Purpose: Tongue cancer is the most common malignant tumor of the oral cavity and the ultimate goal in treatment of the cancer is not only complete excision and meticulous closure of the wound, but also, reconstruction of a demensional and functional tongue. Our study focuses on various factors, such as defect size, extent of tumor, age, application of mandibulectomy or radiotherapy, and their influences on postoperative speech and swallowing function. Methods: Our study was based on 59 patients who underwent tongue cancer operation and reconstruction of the tongue. Speech and swallowing were evaluated according to categories documented by Sultan and Teichgraeber. Patients were classified into 3 groups as partial glossectomy, hemiglossectomy and total glossectomy groups for evaluation. The average age of the patients were 51, and the mean follow-up period was 4 years 2 months. Results: The partial glossectomy group showed statistically relevant results for speech articulation and swallowing abilities compared to the total glossectomy group. In cases of defects involving the mouth floor, the group showed decreased results compared to the group without mouth floor involvement. Increased age showed decreased postoperative results with statistical significance, while mandibulectomy and radiotherapy revealed no statistically significant data. Analysis according to TNM staging resulted in decreased functional result with advanced staging without statistical significance. Conclusion: To summarize the factors influencing the functional outcome in tongue reconstruction, younger patients and early stage cancer with minimal surgical extent revealed more satisfying results while mandibulectomy and radiation did not have influence on our analysis. Addition of various influencing factors and studies with longer follow up periods on our patient groups may provide effective data for more satisfying functional outcomes in the future.

• Journal of Information Technology Services
• /
• v.19 no.3
• /
• pp.35-56
• /
• 2020

The purpose of this study is to measure corporate personality by analyzing the internal employees' corporate reviews and to identify the impact of the representative corporate personality on the relationship between job satisfaction of internal employees and the turnover rate of the company. To this end, we first created a dictionary of words representing the corporate personality with a Word2vec method based on words explaining five corporate personalities, such as reliability, initiative, practicality, activism, and femininity, obtained from the preceding study. Next, we analyzed reviews which were written by internal employees on their companies to measure the score of corporate personality at a review level, aggregated the review level scores for each company to calculate the company level score of corporate personality, and assigned to each company the corporate personality with the maximum score among the five such scores. Also, job satisfaction and turnover rate were measured from internal employees' corporate evaluation scores and the percentage of former employees of each company who left a review on the company, respectively. This study collected datasets of corporate reviews, employee information, and corporate information from Job-Planet from 2014 to 2017, conducted a technical statistic check and correlation analysis to confirm the suitability of the datasets, and performed linear regression analysis to evaluate the research model and verify hypotheses. As a result of the analysis, the job satisfaction of the internal staff has a significant negative impact on the corporate's turnover rate. In addition, companies having a personality of reliability, initiative and femininity also showed a significant cause-and-effect relationship between job satisfaction and turnover rate and among them, job satisfaction of companies having a personality, initiative, showed a greater impact on turnover rate. In sum, we not only proposed a novel method of measuring corporate personality, but also showed that corporates need to identify its corporate personality and to utilize a different strategy to reduce their employee's turnover rate depending on the corporate personality.

• Economic and Environmental Geology
• /
• v.48 no.4
• /
• pp.361-369
• /
• 2015

Interest of unconventional Oil and Gas, which is produced in a different way, has been increasing due to exhaustion of traditional oil and gas. However production of unconventional Oil and Gas is closely related to its technology level. Accordingly in this research, we can analyze technology level of unconventional Oil and Gas with country/sector/year patent analysis. Through the result of this research, U.S is highest patent application national, patent application in oil sand is increasing. In addition, oil sands-realated patents and shale oil-realated patents applying actively in early 1970's and since the mid-1980's showed a decreasing trend. And patent application in unconventional oil and gas has been increasing due to the rise in the oil price 2000's.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.30 no.6
• /
• pp.66-78
• /
• 2003

The purpose of this study was to minimize the forest disturbance around an entry road of a power transmission tower construction site between Taean and Sinsesan, Chungnam. The main study field was classified into existing materials and a GIS, remote sensing analysis, and a field examination. This information was used to identify the most suitable entry road using a degree of green naturality map, eco-naturality map, actual vegetation map, and a forest state map as the existing materials. Also, the study used an normalized difference vegetation index, altitude and slope map in order to make the evaluation materials which used an remote sensing image, and GIS. This data was used to choose an optimum area, and diagnosed the current condition of the vegetation with a field survey of the area. It analyzed vegetation structure, species diversity, the age of trees in a field examination. Subsequently, we proposed four area types based on the analysis results--preservation area, transplantation area, restoration area and development area. As a result, the preservation area was categorized into 8 grades, according to the degree of green naturality, large area of breast diameter at Pinus densiflora community, competition area of Pinus densiflora and Quercus spp. and Quercus spp. community of over 20 years old. A transplantation area established 46 optimum areas according to the GIS analysis and vegetation investigation results. Vegetation restoration plan for disturbance area should be made based on ecological value of existing vegetation to worthwhile area as Quercus spp. mixing forest proposed. The development area selected a ecological worthless place as an artificial forest where Pinus densiflora and Pinus thunbergii growth is poor. This research results suggest that restoration of vegetation will be possible in the real world. Also, ecological restoration guidelines will be made through building and analyzing data base and routine monitoring of transplantation and restoration area.

• Korean Journal of Food Science and Technology
• /
• v.31 no.3
• /
• pp.778-787
• /
• 1999

This study was conducted to standardize the quality of sigumjang. The characteristic of producing method for sigumjang had smoking step. The major component of the amino acids of sigumjang was proline followed by valine, glutamic acid and alanine. Among the organic acids, only acetic acid and propionic acid were detected. The sugar component of sigumjang was composed of glucose predominantly, followed by maltose and fructose. The relation between taste components and sensory scores was analyzed by method of multiple regression analysis. Correlation between contents of taste components and sensory scores were significantly low. Among components of sigumjang inositol and fructose had the higest correlation with sensory scores. The result of multiple regression analysis, taste of sigumjang was explained about 90% with 16 taste components in case of relative value transformed with logarithm and 17 taste components in case of absolute value.

• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.4 s.37
• /
• pp.331-338
• /
• 2005

The rapid advances in high power light sources and arrays as encountered in incandescent lamps have induced dramatic increases in die heat flux and power consumption at all levels of high power LED packaging. The lifetime of such devices and device arrays is determined by their temperature and thermal transients controlled by the powering and cooling, because they are usually operated under rough environmental conditions. The reliability of packaged electronics strongly depends on the die attach quality, because any void or a small delamination may cause instant temperature increase in the die, leading sooner or later to failure in the operation. Die attach materials have a key role in the thermal management of high power LED packages by providing the low thermal resistance between the heat generating LED chips and the heat dissipating heat slug. In this paper, thermal transient characteristics of die attach in high power LED package have been studied based on the thermal transient analysis using the evaluation of the structure function of the heat flow path. With high power LED packages fabricated by die attach materials such as Ag paste, solder paste and Au/Sn eutectic bonding, we have demonstrated characteristics such as cross-section analysis, shear test and visual inspection after shear test of die attach and how to detect die attach failures and to measure thermal resistance values of die attach in high power LED package. From the structure function oi the thermal transient characteristics, we could know the result that die attach quality of Au/Sn eutectic bonding presented the thermal resistance of about 3.5K/W. It was much better than those of Ag paste and solder paste presented the thermal resistance of about 11.5${\~}$14.2K/W and 4.4${\~}$4.6K/W, respectively.

• Journal of Korean Academy of Nursing Administration
• /
• v.11 no.4
• /
• pp.401-414
• /
• 2005

Purpose: This study was to evaluate the utilization of health care service and to provide supportive data for health care policy making in one urban area in Korea. Method: This study tested the significance of public health service using the database of an university hospital and public health center from Feb. 2000 to Dec. 2004. Data were analyzed by multidimensional analysis and data mining technique and produced the information on the classification of utilization characteristics by main disease and the total cost of use and disease association with the users of the public health center. Results: The Results were as follows: 1) Top 10 diseases in the area accounted for 22.4% of total frequency for the most recent 5 years in university hospital, while 59.0% in public health center. 2) There were significant correlations between university hospital and public health center user's insurance type and place of residence: It showed higher use of public health center for free service beneficiaries residing in Seoul than residents in nearby or local area. The medical insurance types for hospital users were more various than those for public health center users. 3) The use of hospital for patients of hypertension, diabetes mellitus and hyperlipidemia was tended to concentrate in mostly autumn and winter since August 2000, while the cost of using public health center for those patients has been steadily reduced since July 2000. 4) As a result of cluster analysis, there were classified into three homogeneous groups according to the total cost of using public health service, age, and the frequency of use. 5) The association analysis on patients with chronic disease in public health center produced a detailed information on accompanying diseases related to the incidence rate of disease of high frequency due to aging, information on drug abuse and immune disease. Conclusion: The health care policy for local community should be evaluated continuously. And the policy to build an integrated data warehousing by public health indicator system and to enhance the faithfulness of data is required.

• Journal of Korean Society for Atmospheric Environment
• /
• v.27 no.6
• /
• pp.650-662
• /
• 2011

The statistical tools such as empirical orthogonal function (EOF), and singular value decomposition (SVD) have been applied to analyze the characteristic of air pollutant over southeast Asia as well as to evaluate Zimeke's tropospheric column ozone (ZTO) determined by tropospheric residual method. In this study, we found that the EOF and SVD analyses are useful methods to extract the most significant temporal and spatial pattern from enormous amounts of satellite data. The EOF analyses with OMI $NO_2$ and OMI HCHO over southeast Asia revealed that the spatial pattern showed high correlation with fire count (r=0.8) and the EOF analysis of CO (r=0.7). This suggests that biomass burning influences a major seasonal variability on $NO_2$ and HCHO over this region. The EOF analysis of ZTO has indicated that the location of maximum ZTO was considerably shifted westward from the location of maximum of fire count and maximum month of ZTO occurred a month later than maximum month (March) of $NO_2$, HCHO and CO. For further analyses, we have performed the SVD analyses between ZTO and ozone precursor to examine their correlation and to check temporal and spatial consistency between two variables. The spatial pattern of ZTO showed latitudinal gradient that could result from latitudinal gradient of stratospheric ozone and temporal maximum of ZTO in March appears to be associated with stratospheric ozone variability that shows maximum in March. These results suggest that there are some sources of error in the tropospheric residual method associated with cloud height error, low efficiency of tropospheric ozone, and low accuracy in lower stratospheric ozone.