• Fisheries and Aquatic Sciences
• /
• v.26 no.2
• /
• pp.145-157
• /
• 2023

Surimi has been traditionally used as the main ingredient in gelling foods, such as imitation crab sticks. However, it can also be used to manufacture snacks without gelling properties. To assess the properties of surimi as a snack ingredient, we prepared fried fish snacks with different surimi grades of Alaska pollack (AP) and threadfin bream (TB) and evaluated their quality characteristics. AP had significantly higher protein and gel strength values than TB did. Regarding color, TB showed significantly lower lightness (L) values and higher redness (a) and yellowness (b) values than AP did, consistent with the appearance of a brown color. TB had significantly lower hardness values, higher thickness expansion, and higher oil content than AP did. Hardness was found to be positively correlated with gel strength and negatively correlated with oil content. In the micro-structure images, more blistering was formed in TB, indicating higher expansion and crispiness. In the sensory evaluation, TB showed higher overall sensory acceptance than AP did, which is the result of its high color content, crispiness, taste, and aroma. Principal component analysis of the electronic nose and tongue revealed that the samples were clearly separated. In particular, TB had more aromatic components than AP in the electronic tongue. Our findings indicate that gel strength, which determines the quality properties of surimi, does not need to be considered in snack manufacturing. In fact, surimi with low gel strength is a more suitable ingredient for snack manufacturing.

• Journal of Distribution Science
• /
• v.10 no.1
• /
• pp.5-10
• /
• 2012

Currently, the rewards programs offered by many companies to strengthen customer relationships have been working quite well. In addition, many companies' rewards programs, designed for stabilizing revenue, are recognized to be effective. However, these rewards programs are not significantly differentiated between companies and there are no accurate conclusions currently, which can be made about their effects. Because of this, a company with a customer rewards program may not comprehend the true level of active participation. In this environment some companies' rewards programs inadvertently hinder business profitability as a side effect while attempting to increase customer loyalty. In fact, airline and oil companies pass on the financial cost of their programs to the customer, and as a result, they have been criticized publicly. The result of this is that the corporations with bad rewards programs tend to get a bad image. In this study of stores' rewards programs, we centered our focus on the design of the program. The main problem in this study is to recognize the financial value of the rewards program and whether it can create a competitive edge for the companies despite the cost issues experienced by them. Customers receiving financial rewards for their business may be just as satisfied with a particular company or store versus those who are not, and the program, perhaps, does not form a distinctive competitive advantage. When the customer is deciding between competing companies to secure their product needs with, we wanted to figure out how much of an affect a valuable reward program had on their decision making. To evaluate this, we set the first hypothesis as, "based on the level of involvement of the customers, there is a difference between customers' preferences for rewards programs." In the results of Experiment 1 we saw that in a financial compensation program for high-involvement groups and low-involvement groups, significant differences appeared and Hypothesis 1 was partially supported. As for the second hypothesis that "customers will have different preferences between a financial rewards programs (SE) and a joint rewards programs (JE)," the analysis showed that the preference for JE was significantly higher than that for other programs. In addition, through Experiment 2, we were able to find meaningful results, which revealed that consumers have shown a significant difference in their preferences between SE and JE. The purpose of these experiments was to enable the designing of a rewards program by learning how to enhance service information distribution and strengthen customer relationships. From the results, there should be a great amount of value for future service-related endeavors and academic research programs. The research is significant, because the results can be found to have a positive effect on reward program designs however, it does have the following limitations. First, this study was performed using an experiment, and all experiments have limitations. Second, although there was an individual evaluation and a joint evaluation, setting a proper evaluation criteria was difficult. In this study, 1,000 Korean won (KRW) in the individual evaluation had a value of 2 points, and, in the joint evaluation, 1,000 KRW had a value of 1 point. There may have been alternative ways to differentiate the evaluations to obtain the proper results. In this study, since there was no funding, the experiments were performed orally however, this was complementary to the study. Third, the subjects who participated in this experiment were students. Conducting this study through experimentation was unavoidable for us, and future research should be conducted using an actual program with the target customers.

• Journal of the Korean Society for information Management
• /
• v.30 no.4
• /
• pp.215-239
• /
• 2013

Even though the overall scholarly community has recognized a dramatic growth and changes in the Information Science research in Korea over the last few decades, there are still only few studies that have identified the changes in terms of long-term and dynamic point of view. We have analyzed 1,007 IS-research articles from leading Korean journals in KCI (Korea Citation Index), published between 2000 and 2011. To discern the trendline of changes in research interests over time, we conducted a time-series analysis by developing grounded subject scheme from the article set and checking the growth rate of the number of published articles and title keywords. A comparative analysis was also conducted by constructing and comparing co-word maps over time to discover visible changes in research topics over this 12-year period of the IS-research in Korea. As a result, we identified some developments and transformations in major subject areas and knowledge structure of the IS-research in Korea over time. The major trend we discovered is that IS-studies over the 12-year period evolved from system-oriented research to library-application research. The changes are especially observed in knowledge management, Web-based system evaluation, and information retrieval areas. When compared to the results of other studies, the result of our study may serve as an evidence of the localization of Korean IS-studies in the first decade of the $21^{st}$ century.

• Korean Institute of Interior Design Journal
• /
• no.7
• /
• pp.31-37
• /
• 1996

The purpose of this study is to grasp the characteristics by image type in interior color. This experiment is carried out by the evaluation method of color simulation with the color image processor. And the result of this experimental evaluation is analyzed quantitatively by HAYASI 1 Program. The results of this analysis are as follows : 1) In casual and clear images, the most main colors are GY, PB, Y , and N, Casual image has high chroma and the most arrangement of colors is hue-contrast or contrast -harmony with white. Also the main colors of clear image are in identical or similar harmony with the hues of floor. 2) In romantic, elegant, pretty, and gorgeous images, the most main colors are GY, RP, R , YR and Y and the most arrangement of colors is identical or similar harmony. The romantic image of pastel tone is wholly lighter than the pretty image of bright tone. And elegant image is lower in chroma than romantic images, so generally dark. Also gorgeous image is the vivid tone with high chroma. 3) In chic and modern images, the main colors are the hues of B, PB, high value and low chroma with bright tone. Also, the main colors are in identical or similar harmony with the hues of floor : BG , B, PB and P. 4) In natural and semiclassic images, the main color is the warm color of Y, YR and the most arrangement of colors is identical or similar harmony. Also Semiclassic images is the dull tone with middle value and middle chroma and darker tone than natural image. 5) In dynamic image, the main color is the hue of N, Y, PB and GY and most of color is high chroma. And the most arrangement of colors is value-contrast.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.7 no.2
• /
• pp.63-68
• /
• 1974

The growth of sea weeds is greatly affected by the environmental conditions of ambient water. Especially nutrient salts in sea water function as a major factor to the growth of lavers, so that the content of inorganic substances in lavers could he a criterion for quality evaluation of lavers. In this experiment, the relation between the quality and the content of Zinc and Magnesium which are not only physiologically active and closely related with pigments such as chlorophll and phycobilins but also important in quantify is discussed if such a measurement to be an index for quality evaluation. Sixteen samples of layers were collected from three different culture farms, 7 from Jangrim-Busan, 6 from Wando-Jeon Nam, 3 from Hadong-Gyeong Nam, and classified into 3 quality grades to each farm and to whole samples by organoleptic test. Zinc and Magnesium were analyzed by atomic absorption spectrophotometry. For pigment analysis, chlorphyll was extracted with 85 percent acetone, filtered and the absorbance was measured at 660 nm and the residue was further extracted with phosphoric buffer solution to determine the optical density for phycobilins at 560 nm. The result showed that the total content of Zinc and Magnesium varied between the farms, but kept consistent with quality grades from the same farm. The Zinc content was correlated proportion- ally with the content of phycobilins, and Magnesium content in total ash could roughly represent the content of chlorophll except some examples in which the Magnesium content of chlorophyll-ext ractresiduewasexceptionallyhigher. In conclusion the contents of these metals provide an applicable index for quality judgment of lavers.

• Proceedings of the KIEE Conference
• /
• 1995.07c
• /
• pp.1081-1084
• /
• 1995

Internal voids located within an insulation will arise partial discharge that causes local breakdown and even the entire insulation breakdown. For HV apparatuses, it is usual case that several voids are formed within non-uniform electric field condition rather than single void within uniform field, which can be solved analitically. The purpose of this work is to study partial discharge and breakdown characteristics of an insulation according to the distribution pattern of two disc-type voids that are located within non-uniform field. The results from numerical field analysis and experiments show that the electric field within the voids decreases as they are arranged more serially, which accordingly results in the increase of partial discharge inception field(PDIF) much higher than that of single void model. With parallel arranged voids, PDIF is almost the same as that of single void model. On the other hand, AC breakdown strength decreases as voids are arranged more serially, which is a natural result considering the reduction of effective insulation thickness. For parallel voids, this effect cannot he noticed where as they show different pattern compared with single void and serial void models in $\Phi$-Q-N analysis. Considering these results may leads us to the conclusion that, in the evaluation of insulating products through PD test, it is not sufficient to determine only PDIV or existence of PD at predetermined voltage level. We could evaluate more accurately by considering all the available data such as PDIV, PD magnitude, PD occurring phase, number of PD pulses, and etc.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.2
• /
• pp.415-424
• /
• 2014

The carrying capacity of existing concrete structures is evaluated by the measured data from displacement and strain gauges for given loads and the results of numerical analysis that are compared with the measured ones. Consequently, this process could be accomplished in doing the direct measurement of residual stress on existing concrete. This study is concerned with the development of IITC (Instrumented Indentation Technique for Concrete) system which is based on the experimental stress analysis technique using non-destructive test method to evaluate the residual stress of concrete structures depending on the types of applied loadings in analysing indentation load - indentation depth curve derived experimentally on concrete surface. As a result, in this paper, almost all of systematized H/W and S/W were newly developed to estimate the residual stresses of concrete structures. Thus, the creation of new experimental equations for deriving residual stresses and automatical calculations of residual stresses using the empirical formula can lead to evaluate the structural resistances conveniently in the structures from construction phase to maintenance stage.

• Journal of Periodontal and Implant Science
• /
• v.34 no.1
• /
• pp.35-48
• /
• 2004

Since the occlusal loading is transmitted to the surrounding bone, the success of an implant treatment is closely related to the distribution of the stress on the implant. The finite element analysis method is often used in order to produce a model for dispersion of stress. Assessment of the success of the implant is usually based on the degree of osseointegration which is a bone and implant surface interface. Implant used in this research was designed through the method of shape optimization after the stress on implant was anaylzed by the finite element analysis method. This study was pertinently assessed by a clinical, histologic, histomorphometric analysis after the shape optimized implant was installed on beagle dog tibia. The results are as follows 1. It clinically showed a good result without mobility and imflammatory reaction. 2. Implant was supported by dense bone and bone remodeling showed on the surrounding area of the implant 3. The average percentage of bone-implant contact was 58.1%.The percentage of bone density was 57.6%. Having above results, shape optimized implant showed the pertinence through clinical and histologic aspects. However, to use the shape optimized implant, the further experiment is required for finding problems, improvement.

• Journal of the Korean Solar Energy Society
• /
• v.27 no.4
• /
• pp.1-9
• /
• 2007

Sensitivity analysis of wind resource micrositing has been performed through the application case at the Antarctic King Sejong station with the most representative micrositing softwares: WAsP, WindSim and Meteodyn WT. The wind data obtained from two met-masts separated 625m were applied as a climatology input condition of micro-scale wind mapping. A tower shading effect on the met-mast installed 20m apart from the warehouse has been assessed by the CFD software Fluent and confirmed a negligible influence on wind speed measurement. Theoretically, micro-scale wind maps generated by the two met-data located within the same wind system and strongly correlated meteor-statistically should be identical if nothing influenced on wind prediction but orography. They, however, show discrepancies due to nonlinear effects induced by surrounding complex terrain. From the comparison of sensitivity analysis, Meteodyn WT employing 1-equation turbulence model showed 68% higher RMSE error of wind speed prediction than that of WindSim using the ${\kappa}-{\epsilon}$ turbulence model, while a linear-theoretical model WAsP showed 21% higher error. Consequently, the CFD model WindSim would predict wind field over complex terrain more reliable and less sensitive to climatology input data than other micrositing models. The auto-validation method proposed in this paper and the evaluation result of the micrositing softwares would be anticipated a good reference of wind resource assessments in complex terrain.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.5
• /
• pp.459-469
• /
• 2020

The purpose of this study is to secure the same or more structural performance and constructability for the detail off hooks cross-constructed at 135° used as external-ties standard detail in reinforced concrete columns, therefore, to the purpose of improving constructability, The clip-type binding implement was suggested. the experiment on the constructability evaluation and cost analysis of the clip-type binding implement by 90° end-hooked transverse reinforcement in reinforced conrete columns was carried out. The results of the analysis confirmed that standard detail column took about an one hour regardless of the diameter of tie. When using the clip-type binding implement, It was reduced to about 50% of the standard detail column. and regardless of the building size, it was most effective for the cost down when using the clip-type binding implement 1ea, it was about 32% fo labor cost reduction effect in comparison with using standard detail. as a result, Using the clip-type binding implement is shown be very effective in the working time and construction cost reduction.