• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.1
• /
• pp.47-54
• /
• 2012

This study analyzed influence factors and the correlation among pollutants which affect occurrence of leaked pollution based on the long-term runoff flow and water quality investigation results to understand the characteristics of highway rainfall runoff pollution load. According to the result of correlation analysis on TSS (Total Suspended Solid) concentration, anteceded dry days, rainfall intensity, traffic volume and etc. as major influence factors of highway rainfall runoff pollution loads, the correlations were weak or scarce in most items. These results might be attributed that runoff pollutant concentration changes vary severely on changes of rainfall intensity and rainfall duration within rainfall and it is affected by disturbances of vehicles and street cleaning and etc. as characteristics of the highway. While Cu, Fe and Zn which are discharged with high concentrations out of heavy metals showed high correlation with particulate matter, organic matter(COD), nutrient(TN, TP), Ni and Pb showed relatively low correlation in a correlation evaluation by pollutant. Significant correlation with traffic volumes was not shown and TSS concentration even decreased in accordance with increase of the traffic volume. In the comparison with precedent studies, it was considered necessary additional analysis of the effects of rainfall section analysis, road type, disturbances of surface contaminants by vehicles, rainfall and climate conditions, surrounding terrains etc.

• Particle and aerosol research
• /
• v.7 no.1
• /
• pp.31-44
• /
• 2011

The hourly volatile organic compounds(VOCs) concentrations between 2005 and 2008 at Bulgwang photochemical assessment monitoring station were investigated to establish a method for quality assurance and quality control(QA/QC) procedure. Systematic error, erratic error, and random error, which was manifested by outlier and highly fluctuated data, were checked and removed. About 17.3% of the raw data were excluded according to the proposed QA/QC procedure. After QA/QC, relative standard deviation for representing 15 species concentrations decreased from 94.7-548.0% to 63.4-125.8%, implying the QA/QC procedure is proper. For further evaluation about the adequacy of QA/QC procedure, principal components analysis(PCA) was carried out. When the data after QA/QC procedure was used for PCA, the extracted principal components were different from the result from the raw data and could logically explain the major emission sources(gasoline vapor, vehicle exhaust, and solvent usage). The QA/QC procedure based on the concept of errors is inferred to proper to be applied on VOCs. However, an additional QA/QC step considering the relationship between species in the atmosphere needs to be further considered.

• The Journal of the Korea Contents Association
• /
• v.11 no.3
• /
• pp.293-301
• /
• 2011

The material of the dental prosthesis was required bio-compatibility for biological, chemical, and physical stabilities. This study was conducted the stability evaluation of mechanical, biological characteristics through comparing Co-Cr alloy(SC group), Ti alloy(ST group) made by the selective laser melting method with Co-Cr alloy(CC group), Ni-Cr alloy(CN group) made by the casting method. Modulus of elasticity for mechanical characteristic evaluation was measured by the tensile test. And we conducted the release material analysis using lactic acid-NaCl solution for the evaluation of biological stability and were observed cytotoxicity through the content of this release medium. Taking these results into account, the Co-Cr alloy made by the selective laser melting method was observed modulus of elasticity higher than he Co-Cr alloy made by the casting method. And the Co-Cr alloy made by the selective laser melting method had more superior biological stability than the other groups as the result of cytotoxicity evaluation through the release material analysis. By this results, we think that alloys made by the selective laser melting method can be applied as materials for making the dental prosthesis.

• Proceedings of the SAREK Conference
• /
• 2007.11a
• /
• pp.416-422
• /
• 2007

The application analysis of bubble pump on the domestic solar water heater system is presented. The system investigated in this study is a passive device, self pumping and self regulating. It was test to use the bubble pump on solar water heater system. The test experiment has been taken on the existed vacuum tube about the efficiency, working fluid temperature and pressure and circulated power. In order to check the working temperature and working pressure effectively, the bubble pump was test separated from the solar water heater. The equipment consists of the bubble pump, heater and heat exchanger. The main structure of bubble pump was design depend on the character of two phase flow. The complete system was instrumented to measure pressures, temperatures and their relationship with the solar radiation intensity. The theory analysis of design bubble pump has been given and the experiment result analysis has been included in the paper.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.2
• /
• pp.749-755
• /
• 2013

The public corporations have already implemented ERP to improve productivity, quality, and cost saving. This paper presents the result of business process improvement based on implementation of ERP. Therefore, this paper performed case study of K corporation. Survey was conducted to define the degree of improvement and evaluation method was presented using AHP. The weights for each business area is assigned based on AHP. Then ERP is evaluated in efficiency, work transparency, information sharability, and easy of use. It is meaningful achievement considering its short term implementation. The human resource management shows a relatively larger improvement than other management processes. However, information sharability shows relatively low improvement than others. This quantified result of user-oriented subjective evaluation on ERP implementation will contribute to evaluate the impact of ERP for owner organizations.

• Journal of Nutrition and Health
• /
• v.31 no.9
• /
• pp.1508-1521
• /
• 1998

The purpose of this study was to analyze and evaluate the menu served in business & industry contract foodservice by assessing nutritional value and by using menu-engineering technique from managers' view point. CAN-Pro program and Kasavana k Smith's Menu Engineering technique were used to evaluate the nutritional value and menu analysis, respectively. The data were analyzed using the SAS package program for descriptive analysis, t-test, ANOVA, and Pearson Correlation Analysis. As the result of nutritional value of lunch menu, all nutrient contents per meal were higher than a third of Korean recommended dietary allowances(RDA), But there was no problem when 20∼30% of plate waste was considered. Carbohydrate : Protein fat ratio was 62.7 : 16.4 : 20.8. Because animal : vegetable source ratios of protein, fat, calcium, iron were 44 : 56, 42 : 58, 22 : 78, 24 : 76, respectively, animal sources of calcium and iron needed to be supplemented. Plural set menus of A site were classified as STAR, PUZZLE, PLOWHORSE, DOG by Menu engineering technique. Set menus and soups & pot-stews among cafeteria menus in C site were operated properly without DOG and PUZZLE item. Side dishes of fishes, meats 8t eggs among cafeteria menus in C site were, for the most part, classified as STAR item, and side dishes of vegetables & salads and noodles among cafeteria menus in C site were STAR, PUZZLE, and DOG items. (Korean J Nutrition 31(9) : 1508-1521, 1998)

• Journal of Korean Academy of Nursing
• /
• v.31 no.5
• /
• pp.871-884
• /
• 2001

this study was to investigate the perception gap on nursing service between consumers and providers. Method: the questionnaire founded on the SERVQUAL was developed and distributed to 300 patients and 210 nurses at the three subjected general hospitals in three provincial city, Korea during February to March, 2001. For data analysis, Cronbachs' Alpha, frequency, t-test, and paired t-test were used. Result: 1. In the gap analysis on the 20 properties constituting nursing service, providers almost all perceived higher than consumer in quality. Among them, the number of properties being statistically significant was 7 in the expectation, 18 in the important and 7 in the performance. 2. In the comparison analysis of the perception gap on the expectation-performance and the important-performance, it turned out that the subjected hospitals had to improve their equipment and facilities immediately. It was suggested a good strategy to strengthen the responsiveness factor and the assurance factor of nursing service. Conclusion: it could be concluded that nurses have to recognize the blind spot of their perception and endeavor to take away the perception gap between consumers and providers.

• 한국터널공학회:학술대회논문집
• /
• 2005.04a
• /
• pp.87-104
• /
• 2005

Rock masses represent natural systems that are inherently complex and in which multiple mechanisms occur. Rock engineering systems such as tunnel and slope interact with surrounding systems through an exchange of both mass and energy. Accordingly the complex nature of rock masses calls for a system approach, and the open nature of rock engineering even requires the engineering to be controlled by a system approach for surrounding environments. However, traditional methods cannot take all variables and their interactions into account and are limited to the system with single mechanisms. Therefore, they are not proper for a complex and open system, and also cannot portray the whole system. Thus, a system approach is indispensable to rock engineering for dealing with the whole of a complex and open system. In this paper Mechanism Path Analysis Methodology (MPAM) Is Introduced for a system approach to rock engineering. The analysis by the methodology gives us all the information of systems behavior in the context of the whole system in order to accomplish the optimum design in accordance with the project objectives and analysis purposes. As an application a conventional model for the evaluation of TBM tunneling performance system is analyzed by MPAM and the result is compared with that by a traditional method.

• International Journal of Safety
• /
• v.9 no.1
• /
• pp.6-11
• /
• 2010

Thermal analysis, heating test on gram scale and simulation of exothermic behavior based on kinetic analysis has been conducted in order to evaluate thermal hazards of self-polymerization of MDI. The exothermic reactions of MDI are expected to be the polymerization which forms carbodiimide and carbon dioxide, dimerization and trimerization. When MDI is kept in adiabatic condition during 1 week (10080 hours), the simulated result shows runaway reaction can occur in the case that initial temperature was more than $130^{\circ}C$. The relationship between the initial temperature (T, $^{\circ}C$) and TMR is given in a following equation. TMR=$4.493{\times}10^{-7}$ exp ($9.532{\times}10^3$/(T+273.15)) We propose that the relationship gives important criteria of handling temperature of MDl to prevent a runaway reaction.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.19 no.1
• /
• pp.29-37
• /
• 2011

Last April, Europe was severly damaged as all social and economic activities came to a halt prompted by the cancellation of all flights resulting from volcanic ash. This exemplifies that the meteorology conditions have significant influence on the flights of airplanes. Hence, in this research the influence that the meteorology has on the domestic flights and its characteristics will be examined, and the core meteorological factors that influence flights in each airport will be drawn. In order to do this, statistical analysis on the influence that the meteorology has on flights was carried out in order to analyze the data about flight cancelation and delay and also its cause, primarily based on the Gimpo, Gimhae, and the Jeju airports. As a result, first, the meteorological factors which impact flight cancellation and delay were different among the domestic airports, and second, it was analyzed that fog was the main meteorological factor in the Gimpo airport, strong wind in the Jeju airport, and fog in the Gimhae airport. Third, between the day the flights were cancelled and delayed occurred, and the day that weren't, the fact that there existed a difference among the actual meteorological factors was statistically drawn. With the result of such analysis, meteorological factors pertaining to the cancellation and delay of flights must be considered seperately by each airport and specialized meteorological information must be provided accordingly. Further, when selecting the position of an airport that is to be constructed in the future, implications that there is a definite need for the meteorology effect evaluation based on past meteorology data can be drawn.