• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.1
• /
• pp.385-392
• /
• 2013

A key element of the fog warning system to prevent large traffic accidents is a visibility measurement device. Recently, the need for it that is similar to the human visual sense and cheap and accurate than expensive fog sensors is increasing. In this paper, we present the performance evaluation and the economic analysis of the Road Visibility Measurement System (RVMS), which is developed for measuring the road visibility through a CCTV camera. For experiments, we have installed a CCTV camera, a fog sensor, and visibility signs at the Yeo-ju Test Road on the Central Inland Expressway. We evaluated the measurements from RVMS and the fog sensor based on observations. The result shows RVMS outperforms the fog sensor with respect to measurement stability and correctness. We also show RVMS has higher economic feasibility and various applications. RVMS can prevent the traffic accidents caused by severe fog and enhance the process of the wide-area visibility information system significantly.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.2
• /
• pp.9-13
• /
• 2011

The Performance-based fire protection design required to construct super high-rise building is the active measure for the evaluation of fire risks and the establishment of fire protection systems on the basis of engineering analysis, which is more efficient and proper than existing prescriptive-based design. This study applied time-line analysis of RSET is required safe egress time and ASET is available safe egress time with the fire and evacuation simulation to analyze. The result of this study showed the sprinkler system increased ASET and fire detection and alarm system reduced RSET efficiently. Reduced evacuation time influences to secure the life safety. Also it is essential to maintain the fire suppression system and fire detection & alarm system properly. Database of fire movement and evacuation action program are useful for the performance-based design.

• Journal of the Korea Convergence Society
• /
• v.10 no.5
• /
• pp.165-171
• /
• 2019

Engineering and Technology have been influencing a lot in the field of sports. Competitiveness, attributes of sports, have forced not only sports players but sports goods to enhance those performance. Particularly in the field of motorsports, the convergence of sports and technology has long been done to satisfy between performance and safety. In this study, strength analysis was carried with FEM to develop CFRP Laminate(Carbon Fiber Reinforced Plastic Laminate) bucket seat targeted to motorsports and car tuning industries and FIA($F\acute{e}d\acute{e}ration$ Internationale de l'Automobile) regulation was applied to design the racing seat and evaluate its strength. FEM modeling considered the attributes of composites was followed by strength evaluation based on Tsai-Wu failure index were done according to Lay-up sequence and layer numbers. The result showed that the lay-up sequence with stacking angle such as $[0^{\circ}/30^{\circ}/60^{\circ}/90^{\circ}/-30^{\circ}/-60^{\circ}]_4$ with 3mm form core was optimal selection in the field of weight and strength evaluation.

• Journal of the Korean Institute of Rural Architecture
• /
• v.15 no.1
• /
• pp.65-72
• /
• 2013

Neighborhood park has the multiple functions toward quantitative and qualitative improvement of quality of citizen's life. This study is about neighborhood park in 4 Local Industry Complex of Cheonan City. Through this study has intended to analyze the status of use and the importance level of facilities. To reach this goal, this study has analyzed the general information, use and importance level of users through such statistical methods as frequency analysis, regression analysis and reliability analysis. As a result, users has the speciality in the neighborhood park in industry complex. Break area or facilities for the workers should be installed. Not end once installed, but continually improved and more efficient management of park facilities will be made. Also, importance of facilities analysis has the higher in normal or importance. Management and cleanliness is especially higher in importance. Importance for the overall facility was affecting in order the facility design, management, safety, installation number.

• Journal of Ocean Engineering and Technology
• /
• v.17 no.3 s.52
• /
• pp.46-51
• /
• 2003

Acoustic emission (AE) signals, emanated during local failure of aluminum alloys, have been the subject of numerous investigations. It is well known that the characteristics of AE are strongly influenced by the previous thermal and mechanical treatment of the sample. Possible sources of AE during deformation have been suggested as the avalanche motion of dislocations, fracture of brittle particles, and debonding of these particles from the alloy matrix. The goal of the present study is to determine if AE occurring as the result of fatigue crack propagation could be evaluated by the joint time-frequency analysis method, short time Fourier transform (STFT), and Wigner-Ville distribution (WVD). The time-frequency analysis methods can be used to analyze non-stationary AE more effectively than conventional techniques. STFT is more effective than WVD in analyzing AE signals. Noise and frequency characteristics of crack openings and closures could be separated using STFT. The influence of various fatigue parameters on the frequency characteristics of AE signals was investigated.

• Journal of Forest and Environmental Science
• /
• v.35 no.2
• /
• pp.90-101
• /
• 2019

Biodiversity refers to the total number and variation among species of flora and fauna of an area. Due to tremendous biotic especially anthropogenic pressure these natural resources are being vanishing. In present study genetic diversity among accessions of Thamnocalamus spathiflorus was evaluated. A total of 51 vegetative characters and 42 primers (10-mer) were screened. Out of 42 screened primers, 28 polymorphic primers were selected for further analysis. A total of 263 bands were recorded as polymorphic whereas 48 bands were monomorphic. The resolving power (Rp) of 28 Randomly Amplified Polymorphic DNA (RAPD) primers ranged from 4.6 (OPE08) to 17.6 (OPA11). The polymorphic information content (PIC) value ranged from 0.21 (OPAH09) to 0.44 (OPG02). The result revealed high degree of genetic relatedness (56 to 80%). Cluster analysis revealed two major clusters both for morphology as well as RAPD. Unlike morphological characterization, the accession (D5) from Bahli, Rampur, Shimla (H.P.) was clustered separately from the others in RAPD cluster analysis. Accessions with closed locality grouped together through RAPD marker system however analogy was recorded for morphological traits. The study conducted reflects the utility of RAPD technique for species identification and phylogenetic studies in bamboo for conducting bamboo breeding program.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.23 no.4
• /
• pp.221-229
• /
• 2019

Several water tanks installed in the building were damaged during the Gyeongju earthquake (2016) and the Pohang earthquake (2017). Since a water tank for fire protection is very important component, seismic safety should be ensured. In this study, an interaction between a water tank and a building was studied by the dynamic analysis of the RC building with the water tank. In case the water tank was installed on the roof of the RC building, it was confirmed that it did not significantly affect the response of the building. Based on the result, dynamic response characteristics of the water tank in the building were studied using two SDOF models represented dynamic behavior of the water tanks under earthquake. An earthquake time-history analysis was carried out with variables of aspect ratio of the tank, story of the building, and installed location in the building using three kinds of earthquakes.

• Nuclear Engineering and Technology
• /
• v.49 no.4
• /
• pp.838-849
• /
• 2017

This paper proposes penalty factor equations that take into consideration the weld strength over-match given in the classified form similar to the revised equations presented in the Code Case N-779 via cyclic elastic-plastic finite element analysis. It was found that the $K_e$ analysis data reflecting elastic follow-up can be consolidated by normalizing the primary-plus-secondary stress intensity ranges excluding the nonlinear thermal stress intensity component, $S_n$ to over-match degree of yield strength, $M_F$. For the effect of over-match on $K_n{\times}K_{\nu}$, dispersion of the $K_n{\times}K_{\nu}$ analysis data can be sharply reduced by dividing total stress intensity range, excluding local thermal stresses, $S_{p-lt}$ by $M_F$. Finally, the proposed equations were applied to the weld between the safe end and the piping of a pressurizer surge nozzle in pressurized water reactors in order to calculate a cumulative usage factor. The cumulative usage factor was then compared with those derived by the previous $K_e$ factor equations. The result shows that application of the proposed equations can significantly reduce conservatism of fatigue assessment using the previous $K_e$ factor equations.

• Journal of Applied Tourism Food and Beverage Management and Research
• /
• v.16 no.1
• /
• pp.21-41
• /
• 2005

This study proposes the customer quality a parameter of service quality from a new perspective, develops and evaluation scale for it in relation to service business, analyzes and evaluates the its effect on service quality and performance. First, the concept of service quality and customer quality was investigated in the literatures, to find a basis for its relation to the quality of hotel service. However, previous 1) Among the service quality components, the strongest correlation exists between physical quality and service quality. 2) Hotel quality is most influenced by customer quality, followed by service provider quality and physical quality showing that when customer quality is incorporated as a prerequisite parameter if hotel quality it has the most effect on hotel quality, which is a new result. 3) Customer quality plays a significant indirect role via hotel quality on performance, and the physical quality and service provider quality offered to the customer at a hotel have more direct effect on performance, illustrating the difference in the effect on hotel quality depending on the component of hotel quality. 4) The evaluation of hotel quality and performance becomes more meaningful and valid only when customer quality is included as a prerequisite parameter of hotel quality to strongly interact with service provider quality 5) Comparative analysis of the different qualities according to the hotel class show a significant difference in customer quality, physical quality and service provider quality and performance between first-class and second-class hotels.

• Transactions of Materials Processing
• /
• v.29 no.5
• /
• pp.257-264
• /
• 2020

This paper is concerned with the influence of the plastic property of the rivet on the numerical prediction of the Self-Piercing Rivet (SPR) Joining. In order to predict the plastic property of the rivet, a ring compression specimen was directly fabricated from the rivet used for the mechanical joining of dissimilar materials, and the FE analysis together with the ring compression test was iteratively carried out by changing the plastic property of the rivet. For reliable FE analysis, a friction coefficient was estimated based on a friction calibration curve, measuring the reductions in inner diameter and height of the ring specimen after the compression test. From each simulation result, the force-displacement curves were then compared from each other so as to obtain the rivet plastic property that shows good agreement with the experimental result. The SPR joining between GA590 1.0t and Al5052 2.0t was conducted, and the numerical prediction was performed with the use of the plastic property evaluated based on the inverse analysis and the one referred from Mori et al. [11]. Comparison of the experiment and the numerical predictions in terms of the interlock and bottom thickness revealed that the reliable evaluation of the plastic property of the rivet is necessary for the trustworthy numerical prediction of the SPR joining.