• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.788-789
• /
• 2008

This paper deals with the loss distribution analysis of 250 kW traction induction motor using a coupled transient finite element method (FEM) and Preisach modeling, which is presented to analyze the characteristics under the effect of saturation and hysteresisloss. The focus of this paper is the efficiency evaluation relative to hysteresis loss, copper loss, etc. on the basis of speed condition a 250 kW Traction Induction Motor. Computer simulation and experimental result for the efficiency using dynamometer show the propriety of the proposed method.

• Management & Information Systems Review
• /
• v.21
• /
• pp.1-27
• /
• 2007

government is rising interest about CRM gradually. At this of time presenting visible effect, this study grasped success factors through the concept arrangement and the existing literature about CRM. The capacity of CRM and the result of CRM (interest of local department which is a variable, a specialty manpower, business cooperation between department, evaluation and compensation, system integration level that is special variable, possibility of system extension, ease of system use) analyzed to local government employee how affects through actual proof analysis.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2007.04a
• /
• pp.369-374
• /
• 2007

For a stability design of steel frames, AISC-LRFD specification recommend to use Alignment Chart and story-based methods in order to determine an effective budding length. Recently, elastic buckling analysis, which is the method that calculate the effective length of members using eigenvalue of the overall structure, has been widely used in practical design of steel frames because this method can be performed effectively and automatically by computers. However, it can in some cases lead to unexpectedly large effective length in column having small axial forces. Therefore, this paper propose a method using elastic buckling analysis, which estimate a proper effective buckling length for all members having a small axial force. For verification of proposed method, it is compared with system based approach and stiffness distribution factor method. As a result, proposed method can rationally solve a problem in some case of column having small axial force. Also, adoption range for proposed method is established.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2003.05a
• /
• pp.3-7
• /
• 2003

For high performance Grid environments, an efficient GIS(Grid Information Service is required In the Metacomputing Directory Service(MDS) of the Glogus middleware, the Lightweight Directory Access Protocol(LDAP), which is a distributed directory service protocol, is used. The LDAP GIS differs from general purpose LDAP directories in that most of the LDAP operations are write in Grid environments. To get an efficient design of the GIS, it is thus required to analyze the performance of the LDAP system in the context of Grid environments. This paper presents the result of a performance analysis of LDAP systems. The main objective of the evaluation is to see the performance scalability of the LDAP system in the Grid environment where the write operations prevails. Based on these results, we suggest directions of an efficient LDAP-based GIS for a high performance Grid.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1999.04a
• /
• pp.94-99
• /
• 1999

In this Paper, the estimation method of painting process in the automobile plant using computer simulation techniques is studied to improve the bottle neck process, the weak point and the productivity. For model and analysis, Promodel is used which is a manufacturing oriented simulation software developed by Promodel corporation in the U.S.A. Firstly the result of the simulation shows that we can obtain capability improvement in the system performance using computer simulation. Secondly, the optimum system specification is decided by comparing reports generated by scenario in simulation program find out the suitable conditions. Finally, the speed of conveyor and a pitch of painting body as the most critical parameters are chosen on the basis of exhaustive field evaluation to study their effects o the capacity of the process. The best alternative condition for the maximum capacity of the process is selected by computer simulation.

• Transactions of Materials Processing
• /
• v.29 no.6
• /
• pp.316-322
• /
• 2020

The flow stress curve is usually determined via uniaxial tensile or simple compression test. However, the flow stress curve up to high strain cannot be obtained using these two tests. This study presents a simple method for obtaining the flow stress curve up to high strain via FE analysis, a simple compression test, and an indentation test. In order to draw the flow stress curve up to high strain, the indentation test was carried out with the pre-stained specimen using the simple compression test. The flow stress curve of Al6110 was evaluated up to high strain using the proposed method, and the result was compared with the flow stress curve of the uniaxial tensile test of the initial material.

• Journal of the Korean Society of Radiology
• /
• v.16 no.3
• /
• pp.211-216
• /
• 2022

In radiation therapy, accurate Quality Assurance (QA) is required to irradiate tumor tissue while minimizing damage to normal tissue. Therefore, a dosimeter that can accurately measure radiation is needed. The purpose of this study is to develop a highly efficient radiation dosimeter with high sensitivity by applying a particle in binder method that can reduce manufacturing costs and simplify processes to perovskite materials that are cheaper and simpler to manufacture. By evaluating the response characteristics to high-energy photon, the applicability of QA dosimeter to radiation therapy was evaluated. As a result of reproducibility evaluation, RSD at 6 MV energy was presented as 1.178% and 15 MV energy was presented as 1.141%. As a result of linearity evaluation according to linear regression analysis, R² values of 0.9999 were presented under each condition of 6 MV and 15 MV energy. It was found that the CsPbBr₃ dosimeter manufactured based on the results of reproducibility and linearity evaluation is highly applicable as a QA dosimeter in the field of therapeutic radiation. The CsPbBr₃ dosimeter manufactured in this study presented more than the standard performance in the evaluation of reproducibility and linearity, and it can be used as a radiotherapy QA dosimeter through improvement.

• Journal of Software Engineering Society
• /
• v.27 no.1
• /
• pp.1-7
• /
• 2018

The consumption of mobile device batteries which are limited resources is an important criterion when circuit designers analyze and evaluate circuits. For this reason, researchers conducted researches with different models of battery consumption to analyze power consumption of mobile devices. The battery consumption model generation techniques have various characteristics depending on availability of sensors, run-time model generation, and models for using in verification and testing. However, there is lack of comparison and analysis between varied battery consumption model generation methods. In this research, we compare and evaluate the analysis methods which have been studied so far to support the circuit investigation for circuit designers. Finally, we suggest the direction of researches in battery consumption analysis using the comparison result.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.1
• /
• pp.45-50
• /
• 2012

This paper on analysis of roundness error after boring turning of Al-6061 materials with CNC lathe. Experiment applying turning parameters is based on experimental design method. A design and analysis of experiments is conducted to study the effects of these parameters on the roundness error using the S/N ratio and analysis of ANOVA. Multiple linear regression analysis is applied to compare experimental with predicted data in consideration of roundness error. To fixation pressure and the opening which are a turning parameter, the cutting depth and feed speed respected the objective attainment of dissertation and to be applied the result they investigated.

• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.6_2
• /
• pp.745-751
• /
• 2021

The International Maritime Organization(IMO) has established Emission Control Areas(ECA) in the Baltic Sea, North Sea, and sea areas in the United States since 2012, and encourages the use of clean fuels such as Natural Gas(NG). To keep pace with the increase in international demand for LNG bunkering vessels, research for the localization of key equipment for LNG bunkering must also be performed in Korea. For research and development of core bunkering equipment and systems, in this study, heat transfer analysis and structural analysis were performed by modeling the saddle, which must first be secured structurally by directly receiving the load of the hose. As a result, the suitability of the model was reviewed by analyzing the temperature distribution and stress level through the analysis results of this study.