• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2004년도 추계학술대회
• /
• pp.197-203
• /
• 2004

Railway system is consisted of various resources such as rail-line, signal, and railcar. It is necessary to efficiently utilize these limited and expensive resources as much as possible up to given line capacity. So far, we treat the line capacity as the criteria for evaluating investment alternatives or for restricting train frequencies, and this criteria is calculated statical and experimental numerical formula. But, line capacity has special attribute that changes dynamically according to operational conditions, so there is a need of new line capacity estimation system. In this paper, we present an improved systematic line capacity model. The proposed model has three main components ; TPS(lain performance simulator), PES(parameter evaluation simulator), LCS(line capacity simulator). The concept of each sub-component is described, including the evaluation method of capacity parameters. And capacity parameter evaluation and estimation results using sample line section data are presented.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 춘계학술대회 논문집
• /
• pp.272-279
• /
• 2003

There are two methodologies to increase transport capacity of railway. One is to invest railroad equipment or vehicles, and the other is to improve operation efficiency through optimization. All of these is intended to increase transport capacity by improving the line capacity, So far, we treat the line capacity as the criteria for evaluating investment alternatives or for restricting train frequencies, and this criteria is calculated statical and experimental numerical formula. But, line capacity has special attribute that changes dynamically according to operational conditions, so there is a need of new line capacity estimation system. Korea Railroad Research Institute(KRRI) proposed a new line capacity estimation system based on the probability simulation method. In this research. we perform analysis of line capacity for the railway improvement alternatives, and to represent the results.

• 대한안전경영과학회지
• /
• 제4권3호
• /
• pp.167-175
• /
• 2002

There are two methodologies to increase transport capacity of railway. One is to invest railroad equipment or vehicles, and the other is to improve operation efficiency through optimization. All of these is intended to increase transport capacity by improving the line capacity. So far, we treat the line capacity as the criteria for evaluating investment alternatives or for restricting train frequencies, and this criteria is calculated statical and experimental numerical formula. But, line capacity has special attribute that changes dynamically according to operational conditions, so there is a need of new line capacity estimation system. The Purpose of this paper is to present a new estimation system of line capacity based on the probability simulation and its applications.

• Journal of Computational Design and Engineering
• /
• 제3권1호
• /
• pp.63-70
• /
• 2016

Deep drawing is a forming process in which a blank of sheet metal is radially drawn into a forming die by the mechanical action of a punch and converted to required shape. Deep drawing involves complex material flow conditions and force distributions. Radial drawing stresses and tangential compressive stresses are induced in flange region due to the material retention property. These compressive stresses result in wrinkling phenomenon in flange region. Normally blank holder is applied for restricting wrinkles. Tensile stresses in radial direction initiate thinning in the wall region of cup. The thinning results into cracking or fracture. The finite element method is widely applied worldwide to simulate the deep drawing process. For real-life simulations of deep drawing process an accurate numerical model, as well as an accurate description of material behavior and contact conditions, is necessary. The finite element method is a powerful tool to predict material thinning deformations before prototypes are made. The proposed innovative methodology combines two techniques for prediction and optimization of thinning in automotive sealing cover. Taguchi design of experiments and analysis of variance has been applied to analyze the influencing process parameters on Thinning. Mathematical relations have been developed to correlate input process parameters and Thinning. Optimization problem has been formulated for thinning and Genetic Algorithm has been applied for optimization. Experimental validation of results proves the applicability of newly proposed approach. The optimized component when manufactured is observed to be safe, no thinning or fracture is observed.

• Architectural research
• /
• 제19권1호
• /
• pp.1-6
• /
• 2017

Over the past decade, building information modeling (BIM) has gained a foothold in the construction sector. However, as digital data generated in the virtual space of a computer environment, BIM-based data have an inherent limitation in their application efficacy under field conditions. To overcome this, the present study employs augmented reality (AR) to reduce the discrepancy between the digital data generated in virtual spaces and real-world conditions. We assessed the potential applicability of an AR-based interface by analyzing existing examples of Apple, Google, and Facebook, which reflect the recent developments of technologies focusing on user experience. We then proceeded with an AR study, restricting the scope of application to a mobile environment in which an efficient information transmission between a digital model and real life can take place. Object-oriented software engineering was employed to ensure an efficient implementation of a BIM-based AR system for campus space management (CSM) in a mobile environment. Finally, we conducted a module test to check the reliability of the CSM method by using an AR-based mobile system with a prototype of the model used in university campuses, and extracted and itemized the supplementary requirements for CSM by using BIM tools for running AR applications.

• Journal of applied mathematics & informatics
• /
• 제40권1_2호
• /
• pp.351-370
• /
• 2022

The design of mechanical structures aims to meet criteria, together with the safety of operators and lives in the vicinity of the equipment. Thus, there are several cases that meeting the desired specification causes the mechanical device to perform unstable and, sometimes, chaotic behavior. In these cases, control methods are applied in order to stabilize the device when in operation, aiming at the physical integrity of the component and the device operators. In this work, we will develop a study about the influence of a controller applied in a non-ideal capsule system operating with uncertain parameters, being non-existent in the literature. For this, two initial conditions were used: one that the capsule starts from rest and another that it is already in motion. Thus, the effectiveness of the controller can be assessed in both initial conditions, restricting the movement of the internal vibration-impact system to the capsule.

• 대한교통학회지
• /
• 제26권6호
• /
• pp.29-38
• /
• 2008

서울의 오피스 시장은 빠르게 성장하고 있으며, 앞으로도 그 성장세는 계속될 것으로 전망되고 있다. 그에 따라 오피스 시장에 관한 연구들이 많이 이루어지고 있다. 교통여건은 오피스 임대료를 결정하는 가장 중요한 요소중 하나지만, 교통여건이 오피스 임대료에 미친 영향을 실증적으로 규명한 연구는 매우 드문 실정이다. 이 연구는 교통여건이 오피스 임대료에 미친 영향을 규명하기 위해 도심 80개, 강남 96개, 여의도 74개의 오피스 빌딩을 대상으로 임대료 회귀모형을 구축하였다. 실증분석결과 교통여건은 오피스 임대료를 결정하는 중요 요인이며, 교통량이 많아져 교통혼잡이 발생할 경우 오피스 빌딩 임대료는 하락한다는 사실을 규명할 수 있었다. 또한 이 연구를 통해 서울의 3대 오피스 중심 지역(도심, 강남, 여의도)별로 교통여건이 오피스 임대료에 미치는 영향이 다르다는 점도 규명할 수 있었다.

• 원예과학기술지
• /
• 제33권6호
• /
• pp.932-940
• /
• 2015

One of the main factors restricting production of triploid seedless watermelon is poor germination due to weak embryos, thick seed coats, and larger air spaces. This study was carried out to investigate the priming effects of different concentrations of chemicals, including hydrogen peroxide ($H_2O_2$), fusicoccin, and gibberellic acid (GA) on germination and seedling uniformity of triploid watermelon (Citrullus lanatus). Three commercial triploid cultivars, Seedless Plus, Sinus, and Sizero, were pretreated with water and different levels of $H_2O_2$ (2 and 4%), fusicoccin (FC: 1, 5, and $10{\mu}M$), and GA (1, 5, and $10{\mu}M$). The present findings helped to find optimal priming conditions for improving germination of triploid watermelon. Treatment with $5{\mu}M$ GA and hydropriming helped to break seed dormancy, enhancing the final germination percentages in all triploid cultivars and increasing the germination index in Sizero. These seed-priming treatments could be used on large scale for industrial applications. Moreover, hydropriming provides a simple, effective, and costless method to improve seed germination and seedling vigor of Sinus and Sizero varieties.

• Journal of Microbiology and Biotechnology
• /
• 제18권9호
• /
• pp.1578-1583
• /
• 2008

Rhizobacteria are used as inoculants to enhance crop yield and for biological control of fungal pathogens. Fluorescent pseudomonads isolated from the rhizosphere of groundnut showed suppression of the phytopathogen Macrophomina phaseolina that causes charcoal rot of groundnut, an economically important agroproduct. Two strains of fluorescent pseudomonads, designated as PS1 and PS2, were selected as a result of in vitro antifungal activity. After 5 days of incubation at $28{\pm}1^{\circ}C$, both PS1 and PS2 caused clear inhibition zones in dual cultures, restricting the growth of M. phaseolina by 71 % and 74%, respectively. Both the strains were capable of producing siderophores, indole acetic acid, and hydrocyanic acid, and causing phosphate solubilization under normal growth conditions. These strains, when used as inoculants in groundnut, enhanced germination up to 15% and 30% with subsequent increase in grain yield by 66% and 77%, respectively. Conversely, when the pathogen alone was tested 57% decrease in yield was recorded. Thus the studies revealed the potential of the two pseudomonads not only as biocontrol agents against M. phaseolina, but also as a good growth promoter for groundnut.

• ETRI Journal
• /
• 제39권2호
• /
• pp.234-244
• /
• 2017

Research interest in three-dimensional multiple-input multiple-output (3D-MIMO) beamforming has rapidly increased on account of its potential to support high data rates through an array of strategies, including sector or user-specific elevation beamforming and cell-splitting. To evaluate the full performance benefits of 3D and full-dimensional (FD) MIMO beamforming, the 3D character of the real MIMO channel must be modeled with consideration of both the azimuth and elevation domain. Most existing works on the 2D spatial channel model (2D-SCM) assume a wide range for the distribution of elevation angles of departure (eAoDs), which is not practical according to field measurements. In this paper, an optimal FD-MIMO planar array configuration is presented for different practical channel conditions by restricting the eAoDs to a finite range. Using a dynamic network level simulator that employs a complete 3D SCM, we analyze the relationship between the angular spread and sum throughput. In addition, we present an analysis on the optimal antenna configurations for the channels under consideration.