• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1984년도 하계학술회의논문집
• /
• pp.183-184
• /
• 1984

• 한국자동차공학회논문집
• /
• 제13권5호
• /
• pp.29-34
• /
• 2005

141,841 car-to-car collision had occurred in 2003, and among the accidents 51,796 were rear-end impact. According to insurance company for loss or damage, more than $60\%$ of rear-end impact victims suffer neck injury. This means at least 31,000 neck injury victims have happened in 2003. More than $97\%$ of the neck injury victims have low severity injury than A.I.S 2. Head restraint, which is designed to limit rearward head movement and equipped on seat, can considerably protect neck from rear-end impact. In this paper we evaluated head restraint geometry and drivers' sitting position according to RCAR standard and carried out low speed volunteer crash test. The crash speed is 4km/h and N.I.C value is used to determine injury probability. Through these research results we can introduce the method to prevent neck injury at rear-end impact.

• 기본간호학회지
• /
• 제17권2호
• /
• pp.177-186
• /
• 2010

Purpose: The purpose of this descriptive study was to investigate the application of physical restraints in ICUs of a university hospital. Method: Data were collected from August 1 to October 1 2009, using a recording tool from Electric Nursing Records and an observation tool for physical restraints and related factors. Frequency, percentage, and paired t-test with the SPSS/WIN 16.0 program were used to analyze the data. Results: The application rate for physical restraints in 5 ICUs was 34.3%, the highest application rate was 48.4% in the neurosurgical ICU. The mean frequency for physical restraint application per patient was 1.14, and the mean hours of restraint application per incident was 113.01 hours. The most common complications of physical restraints were bruising and edema. Conclusion: Many ICU nurses use physical restraints when caring for patients who are at high risk for falls, including patients have high levels of acuity, decreased level of consciousness or increased irritability. When physical restraints are applied, patients show resistance against the use resulting in side effects of bruising and edema. Therefore, nurses should observe changes in restrain sites, perform nursing interventions to prevent complications, and minimize the use of physical restraints.

• Child Health Nursing Research
• /
• 제9권2호
• /
• pp.123-130
• /
• 2003

Purpose: The purpose of this study was to investigate the relationship between health locus of control(HLOC) and eating behavior in obese middle school girls. Method: The sample consisted of 170 obese middle school girls in Seoul. Result: 1. The average scores of HLOC were HLOC-Internal ; 4.11, HLOC-External ; 2.45, HLOC-Chance ; 2.09. 2. The average scores of eating behavior factors were Disinhibition ; 2.69, Dietary Restraint ; 2.67, Hunger ; 2.55. 3. The HLOC-Internal and eating behavior(dietary restraint and hunger) were correlated positively. The HLOC-Chance and disinhibition was correlated positively. But HLOC-Chance and dietary restraint was correlated negatively. The HLOC-External and eating behavior(dietary restraint, disinhibition and hunger) were correlated positively. 4. There was not a significant difference in HLOC depending on the demographic characteristics(grade, degree of obesity, father & mother's body shape, existence of obese sibling). There were significant differences in HLOC-Internal and HLOC-External according to thinking about oneself who is obese or not. 5. There was not a significant difference in eating behavior depending on the demographic characteristics(grade, degree of obesity, father & mother's body shape, existence of obese sibling, perception of oneself as a obese). Conclusion: This study has shown a correlation between HLOC and eating behavior. As a result of these findings, clinical and school nurses should be involved in management and counselling of obese girls concerning individual health locus of control and eating behavior.

• 대한조선학회논문집
• /
• 제37권2호
• /
• pp.127-136
• /
• 2000

선박 건조 시 발생하는 용접변형은 블록의 정도를 떨어뜨리고 교정작업으로 인한 생산성 저하의 요인이 되고 있다. 따라서 설계 단계에서 변형을 최소화 할 수 있는 작업기준을 마련한다면 생산성 증대는 물론 품질의 향상을 가져올 수 있을 것이다. 여기에는 먼저 블록의 조립과정에 따른 변형을 예측할 수 있는 정확하고 효율적인 방법이 마련되어야 한다. 본 논문에서는 고유변형도 이론과 유한요소 해석을 결합한 효율적인 변형예측 기법을 제안하였다. 고유변형도는 간이 열탄소성 해석 결과 최고온도 분포와 구속도에 의해 결정된다. 따라서 용접 열전도 해석과 구조물의 조립과정에 따른 구속도 계산을 수행하여 실제 구조물에 발생하는 고유변형도를 정확히 구하고자 하였다. 이를 이용하여 보강판의 변형 예측을 구현하였고 간단한 선체 블록에 적용할 수 있음을 확인하였다.

• Steel and Composite Structures
• /
• 제2권4호
• /
• pp.297-314
• /
• 2002

An energy method of analysis is presented which can be used to study the inelastic lateral-distortional buckling of hot-rolled I-sections continuously restrained at the level of the tension flange. The numerical modelling leads to the incremental and iterative solution of a fourth-order eigenproblem, with very rapid solutions being obtainable, so as to enable a study of the factors that influence the strength of continuously restained I-beams to be made. Although hot-rolled I-sections generally have stocky webs and are not susceptible to reductions in their overall buckling loads as a result of cross-sectional distortion, the effect of elastic restraints, particularly against twist rotation, can lead to buckling modes in which the effect of distortion is quite severe. While the phenomenon has been studied previously for elastic lateral-distortional buckling, it is extended in this paper to include the constitutive relationship characteristics of mild steel, and incorporates both the so-called 'polynomial' and 'simplified' models of residual stresses. The method is validated against inelastic lateral-torsional buckling solutions reported in previous studies, and is applied to illustrate some inelastic buckling problems. It is noted that over a certain range of member slenderness the provisions of the Australian AS4100 steel standard are unconservative.

• 한국자동차공학회논문집
• /
• 제22권6호
• /
• pp.1-8
• /
• 2014

Safety performance of a new car is evaluated through USNCAP and their results in the star rating are provided to the consumers. It is very important to obtain high score of USNCAP to appeal their performance to consumers. Therefore the car companies have made the effort to improve their car safety performance. These efforts should satisfy the demand not only to get high score but also to pass the FMVSS, NHTSA regulations on safety. Huge numbers of car crash tests have been conducted on these bases by car companies. However physical tests spend too much cost and time, as an alternative way, the simulation on the car crash could be a solution to reduce the cost and time. Therefore the simulations have been widely conducted in car industry and various researches on this have been reported. In this study, restraint system had been optimized to minimize the injury of female passenger. Belted $5^{th}%ile$ female frontal crash test was selected from various test methods of USNCAP for the study. Initial velocity of the test was 56km/h. The combination injury probability of USNCAP was selected as an objective function and the injury limit value, which was defined in FMVSS, was set to an optimization constraint. Many researches that were similar to this study had been conducted, however most of them had limitation that interaction between airbag and safety belt had not been considered. Contrary to these researches, the interaction was considered in this study.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2000년도 봄 학술발표회논문집
• /
• pp.141-149
• /
• 2000

This study performs the elastic and viscoelastic analysis of composite continuous beams with flexible shear connectors. Due to creep and shrinkage of the concrete part, the stress redistribution between the concrete slab and steel beam, and the evolution of the redundant restraint reaction occur with time. Using the equation of equilibrium, internal and external compatibility condition, and constitutive relationships, mathematical formulations are formulated. The solution is obtained by means of numerical step-by-step techniques and the finite difference method. Numerical parametric studies are performed to evaluate the stress redistribution, and the evolution of the redundant restraint reaction. The parameters include the stiffness and spacing of shear connectors, the age of concrete at loading, and the relative humidity.

• 오토저널
• /
• 제12권2호
• /
• pp.59-70
• /
• 1990

Crack of breaking toughness of most Ceramics material is 1-5MPa .root.m but that of Zirconia Ceramics is improved to be 6-8MPa .root.m and its development of machining difficult-to-machine material is on the rise as urgent subject. For general Zirconia Ceramics machining, diamond grinding wheel is generally used by selecting an appropriate one and establishing grinding condition but due to such limitations as economics, grinding efficiency and machining geometry, great interest in machining method being used for diamond tool is emphasized. But it is reported that diamond tool is oxidized by cutting heat in the air and is graphitized in vacuum, which causes bad effects on tool life. In this study, to restraint cutting heat the internal side of tool is cooled, and restraint low temperature cooling system and being experimented. Further, the machinability of diamond tool for Zirconia Ceramics machining is analyzed with respect to tool wear and stress.

• 한국구조물진단유지관리공학회 논문집
• /
• 제27권3호
• /
• pp.30-37
• /
• 2023

PSCB 거더교는 상하부 플랜지와 복부가 일체화된 폐합된 단면으로 일반적으로 거더와 바닥판이 분리된 교량과 구조적 특성이 상이하여 PSCB 거더교의 특성을 반영한 유지관리 방안이 필요하다. 고속도로 PSCB 거더교의 정밀안전진단 보고서를 수집하여 손상 유형을 분석한 결과, 공용 중 발생되는 열화·손상은 대부분 상부플랜지에 집중되어 있다. 특히 상부플랜지 하면의 교축방향 균열은 분석대상 PSCB 거더교의 약 70 %에서 발생되었고, 이는 외부하중에 의한 구조적 균열 보다 수화열, 건조수축 등 간접하중에 의한 균열로 판단된다. 공용중인 PSCB 거더교의 내구성 향상 및 유지관리 비용 절감 등을 위해서는 설계단계부터 구속 건조수축 균열의 제어가 필요하다. 따라서 본 논문에서는 PSCB 거더교 상부플랜지 하면 균열의 주요 원인인 구속 상태에서의 건조수축으로 인하여 발생되는 균열에 대하여 Gilbert Model을 이용하여 직접 계산하고, 철근량, 철근직경 및 간격 등 영향인자를 분석하였다. 분석결과, 간접하중으로 인하여 발생되는 균열폭은 H16 철근 기준 철근비 0.01 이하, 철근비 0.01 기준 H19보다 직경이 큰 철근의 경우 허용 균열폭 0.2 mm를 초과하는 것으로 나타났으며, 최종적으로 균열폭 검토 결과를 바탕으로 PSCB 거더교 상부플랜지의 균열폭 제어 방안을 제안하였다.