• Architectural research
• /
• v.25 no.2
• /
• pp.29-40
• /
• 2023

The purpose of this study is to analyze the conflicts caused by the spatial expansion in two types of urban heritage in Seoul. To explain the national and professional orientation found in each spatial transformation, the study brought the concept of 'historic state' and 'epitome,' thereby examining the operating system of the conflicts. Field observations and stakeholder interviews were performed based on literature and historical research. The study results are as follows. ①In the case of Gwanghwamun and Donuimun, the spatial expansion is to find the historic state of the sites. Gwanghwamun with high national status and substance, conflicts show a pattern that spreads to memory conflicts. Donuimun is relatively unknown and has no substance so that a flexible method of digital restoration was applied. ② In the case of Ikseon-dong and Bukchon hanok, they show heterogeneous spatial expansion. The conflicts in relation to this is caused by the epitome of hanok. In Ikseon-dong, illegal installation of structures(non-epitome) is prevalent, while in Bukchon, there was a process of transferring the new basement(non-epitome) as part of the hanok. ③Conflicts in Gwanghwamun can be coordinated by referring to the digital restoration of Donuimun, and conflicts in Ikseon-dong can be resolved by taking Bukchon as a precedent.

• Transactions of Materials Processing
• /
• v.13 no.1
• /
• pp.53-58
• /
• 2004

The microstructural changes of Al-Zn-Mg-Cu alloy containing Sc during hot extrusion and post heat treatment were investigated. Two kinds of Al-Sc alloys with different alloying elements (B1, B2) were hot extruded to make T-shape bars at extrusion temperature of $380^{\circ}C$, then the bars were solution treated at $480^{\circ}C$ for 2hrs followed by artificial aging at $120^{\circ}C$ for 24hrs. The interior microstructure of as extruded bar consisted of elongated grains, however, fine equiaxed grains were also observed around surface. The microstructural gradient suggested that different restoration process could proceed during the hot extrusion. For B1 and B2, different grain growth behaviors were found around the surface during the post heat treatment. Rapid grain growth behavior was observed for B1 around the surface, however, it was not observed for B2. Orientation pinning, which was related with the evolution of preferred orientation, and precipitation were thought to be responsible for the rapid grain growth.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.10a
• /
• pp.281-284
• /
• 2003

The microstructural changes of Al-Zn-Mg-Cu alloy containing Sc during hot extrusion and post heat treatment is investigated. Two kinds of Al-Sc alloys with different alloying elements (B1, B2) are hot extruded to make I-shape bars at 380$^{\circ}C$, then the bars are solution treated at 480$^{\circ}C$ for 2hrs followed by artificial aging at 120$^{\circ}C$ for 24hrs. The interior microstructure of as extruded bar consists of elongated grains, however, fine equiaxed grains are mainly observed around surface. The microstructural gradient suggests that different restoration process can proceed during the hot extrusion. For B1 and B2, different grain growth behaviors are found around the surface during the post heat treatment. Rapid grain growth behavior around the surface is discussed related with the crystallographic orientation of the grain.

• Journal of Korea Multimedia Society
• /
• v.7 no.12
• /
• pp.1639-1649
• /
• 2004

In this paper, a method for detection of forged signatures based on spectral analysis of directional gradient density function and a weighted fuzzy classifier is proposed. The well defined outline of an incoming signature image is extracted in a preprocessing stage which includes noise reduction, automatic thresholding, image restoration and erosion process. The directional gradient density function derived from extracted signature outline is highly related to the overall shape of signature image, and thus its frequency spectrum is used as a feature set. With this spectral feature set, having a property to be invariant in size, shift, and rotation, a weighted fuzzy classifier is evaluated for the verification of freehand and random forgeries. Experiments show that less than 5% averaged error rate can be achieved on a database of 500 signature samples.

• Journal of Conservation Science
• /
• v.16 s.16
• /
• pp.27-38
• /
• 2004

This study was performed to characterize historical paper artefacts from 16th to 19th century from Chungbuk National University Museum (CNUM) in Korea. In order to know the fiber composition, surface features and fiber orientation in historic paper artefacts, LM, SEM and EDX analysis observations were applied. Based on tested results, it was concluded that Korean historic papers from 16 to 19th century were made of paper mulberry fibers called dak, which had 2.79-16.03 m of fiber lengthes and $4.5-26{\mu}m$ of lumen widthes, and they were relatively well preserved. According to EDX analysis, the examined papers differed to the contents of inorganics. High contents of S, Si, Ca, P and Al refer to use fillers, such as gypsum, clay and talc, for paper artifacts. In particular, half of samples contained some amounts of S, Cl and Fe. Since those inorganics might be potentially harmful for the paper permanency, therefore it should be considered special restoration measures from the preservation point of view.

• Korean Journal of Computational Design and Engineering
• /
• v.21 no.1
• /
• pp.90-98
• /
• 2016

When ships and offshore plants are flooded or the floating crane is equipped with a heavy object, these floating structures are excessively inclined. In this case, immersion, heel, and trim affecting the hydrostatic restoration performance are very large and are coupled each other. In this paper, in order to calculate a static equilibrium position of floating structures with excessive inclination, the nonlinear governing equations were constructed by sequential linearization. In the governing equation, the immersion, heel, and trim are fully coupled, and the equations are represented using a plane area, a primary moment, and a moment of inertia of the water plane area. Therefore, it is possible to calculate the additional factor related the water plane area for estimating stability. Position and orientation of the floating structure are obtained by iterative calculation. The calculated results are compared with the previous studies in the aspect to the performance and the accuracy.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 1997.11a
• /
• pp.228-232
• /
• 1997

The special interest should be paid to the analysis of the influences of positive emotions in terms of their possible effects on the dyanmics of autonomic. recovery after the negative affective stimualtion. Taking into account emotion-specific autonomic response patterning and dissociation of parameters of autonomic arousal during experience of both positive and negative emotional states, this problem seems a challenging one. In present study several autonomic parameters were analyzed altogether, namely inedices of electrodermal activity, heart rate and respitation rate during consecutive combination or both IAPS-based visual affective and auditory stimulation. The aim of the study was analysis of patterns of electrodermal and cardiorespiratory responses during emotional states evoked by negative affective visual stimulation followed by positive or neutral auditory one with intention to identify if the latter is able to facilitate post-stress recovery and enhance restoration of pre-arousal levels. The main orientation was dirdcted towards the further application of experimentally induced comfort emotions for dampening the negative consequences of exposure to stressful stimuli.

• Animal cells and systems
• /
• v.16 no.1
• /
• pp.69-76
• /
• 2012

This study was conducted to examine how a low-head dam removal (partial removal) could affect benthic macroinvertebrate communities in a stream. Benthic macroinvertebrates and substrates were seasonally sampled before and after dam removal (March 2006-April 2007). Benthic macroinvertebrates and substrates were quantitatively sampled from immediately upstream (upper: pool) and downstream (lower: riffle) sites, the location of the dam itself (middle), and immediately above the impoundment (control: riffle). After the removal, species richness and density of benthic macroinvertebrates as well as the EPT group (Ephemeroptera, Plecoptera and Trichoptera) increased to higher levels than those before the removal, while functional feeding groups and habitat orientation groups changed more heterogeneously at the upper site. At the lower site, species richness and density decreased somewhat immediately after dam removal, which was associated with an increase of silt and sand, but recovered after monsoon floods which helped to enhance substrate diversity at the upper site. Decreased dominance index and increased diversity index in both the upper and lower sites are evidence of positive effects from the dam removal. In conclusion, we suggest that even a partial removal of a dam, resulting in increased substrate diversity in the upper site, could sufficiently help rehabilitate lost ecological integrity of streams without major habitat changes.

• Korean Institute of Interior Design Journal
• /
• v.15 no.6 s.59
• /
• pp.35-42
• /
• 2006

'Place' as the spacial concept became now key concept in the environments and architecture from the mid 20th century. The purpose of this study is to explain the placeness in Aldo Rossi's architecture according to space sequence. Aldo Rossi has attempted to apply the typological elements for the restoration of place in the cites and buildings which had ruined by modem architecture. Therefore It would be important for us to find out a method which making placeness in Aldo Rossi's architecture. Experiencing place could be examined by the method of space sequence. The experience of place is related to the experience of the human body in architecture space. The experience of place in space can make a unique placeness of architect. And, the experience of the place through the movement of the body and the vista, is the key elements of space sequence to explain the placeness in architecture. The results of this research are following. (1)Key space which related to movement of human body in Aldo Rossi's architecture make a set consisted of a goal space and the surrounding space. (2)The Arrange of Space and the formation of the boundary is more complex in the dispersed buildings than that of the single building. (3)The typological elements like a courtyard, a cylinder and the axis in the buildings made the goal space and helping people to find the orientation of human body.

• Journal of Korean Dental Science
• /
• v.12 no.1
• /
• pp.13-19
• /
• 2019

Purpose: The aim of this study was to compare the flexural strength of provisional fixed dental prostheses which was three-dimensional (3D) printed by several build directions. Materials and Methods: A metal jig with two abutment teeth and pontic space in the middle was fabricated. This jig was scanned with a desktop scanner and provisional restoration was designed on dental computer-aided design program. On the preprocessing software, the build angles of the restorations were arranged at $0^{\circ}$, $30^{\circ}$, $45^{\circ}$, $60^{\circ}$, and $90^{\circ}$ and support was added and resultant structure was sliced to a thickness of $100{\mu}m$. Processed restorations were printed with digital light processing type 3D printer using poly methyl meta acrylate-based resin. After washing and post-curing, compressive loading was applied at a speed of 1 mm/min on a metal jig fixed to a universal testing machine. The maximum pressure at which fracture occurred was measured. For the statistical analysis, build direction was set as the independent variable and fracture strength as the dependent variable. One-way analysis of variance and Tukey's post hoc analysis was conducted to compare fracture strength among groups (${\alpha}=0.05$). Result: The mean flexural strength of provisional restoration 3D printed with the build direction of $0^{\circ}$ was $1,053{\pm}168N$; it was $1,183{\pm}188N$ at $30^{\circ}$, $1,178{\pm}81N$ at $45^{\circ}$, $1,166{\pm}133N$ at $60^{\circ}$, and $949{\pm}170N$ at $90^{\circ}$. The group with a build direction of $90^{\circ}$ showed significantly lower flexural strength than other groups (P<0.05). The flexural strength was significantly higher when the build direction was $30^{\circ}$ than when it was $90^{\circ}$ (P<0.01). Conclusion: Among the build directions $0^{\circ}$, $30^{\circ}$, $45^{\circ}$, $60^{\circ}$, and $90^{\circ}$ set for 3D printing of fixed dental prosthesis, an orientation of $30^{\circ}$ is recommended as an effective build direction for 3D printing.