• Korean journal of applied entomology
• /
• v.48 no.2
• /
• pp.197-202
• /
• 2009

The Luciola lateralis larva took 5.3 days from climbing on the land to the pupal cocoon formation. It took 6.6 days for a larva to eventually transform to a pupa after building a pupal cocoon. The size of pupal cocoon was 10.1 mm in length, 4.7 mm in width and its wall thickness was 1.3 mm. The mean pupal period was 10.5 days. The adult stayed 6.8 days in the pupal cocoon before escaping the cocoon. The peak adult emergence appeared around 9 p.m., and decreased after 10 p.m. The optimal soil temperature for emergence was $23.4^{\circ}C$. The female adult of the natural population (Nat-type) lived shorter, laid fewer eggs, and the oviposition frequency was fewer than that of the Lab-type individuals. However, a few individuals from the natural population laid 200-400 eggs. The less number of oviposition in the natural population may be due to the fact that the female adults might lay eggs before the collection for the experiment.

• Journal of Ecology and Environment
• /
• v.33 no.4
• /
• pp.299-306
• /
• 2010

The use of local seed provenance is often recommended in forest restoration. Early vigor is a combination of the performance of seed germination and emergence after planting. The ability of young Brant's oak plants to grow and develop after emergence and its dependence on local habitat conditions was investigated in this study. The effects of seed source and shade on early growing seedlings of Brant's oak (Quercus brantii L.) were determined in field measurements. Seeds of Quercus brantii L. were collected from 4 forest areas (seed sources) in southern Zagros (Provinces of Kohkilouyeh-Bouyer Ahmad and Fars) at altitudes of 850, 1,100, 1,500, 2,100 m a.s.l., and planted in a nursery constructed in southwestern Iran. According to a split-plot design consisting of four blocks, each containing two main treatment plots (no shading, partial shading), each main plot was sub-divided into four sub-plots (for elevations of 850, 1,100, 1,500 and 2,100 m). Results showed that shade treatments had significant effects on emergence percentage and rate, shoot length, shoot dry weight (SDW), root dry weight (RDW), leaf area (LA), and chlorophyll content. Ecological factors also had an effect on seed performance. Altitude of seed source had a very significant effect on root length, LA, SDW, and RDW. The seeds collected from 850 m a.s.l. elevation showed the highest performance, especially in leaf area, root length, shoot dry weight, and root dry weight. Our results showed that the altitude of 850 m a.s.l. was the best for collecting Brant's oak seeds.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.23 no.3
• /
• pp.239-248
• /
• 2007

The accuracy and dimensional stability of rubber impression materials are very important for the fitness of the final restoration. The purpose of this investigation was to evaluate the effects of the storage time and pouring frequency of the additional silicone materials on dimensional stability. Total 30 impressions were made of tooth prepared single crown. The dies had 1 buccolingual, 1 mesiodistal and 1 occlusogingival lines. Two additional silicone materials(examixfine, aquasil) were included. 15 specimens were made of each impression material and poured by type IV stone over times(1hour, 24hours, 72hours) after mixing. 5 impressions poured after 1 hour were used for second pouring after 24hours and third pouring after 72hours. The same examiner measured each specimen 3 times after lazer scanning. All statistical tests were performed with the level of significance set at 0.05. The results indicated that significant difference at any measuring point of stone dies except the buccolingual and mesiodistal lines of the specimen made at 1hour after mixing with examixfine when measurements at 1hour, 24hours and 72hours were campared. There were significant difference between two impression materials and at every measuring point of stone dies made at second and third pouring. The length of measuring point increased significantly as time passed by and increase of the pouring frequency. However, this results are clinically acceptable except the dies of the third pouring. Under the conditions of this study, the shrinkage rate of the additional silicone rubber impression materials significantly increased as time passed by and increase of the pouring frequency.

• Spatial Information Research
• /
• v.13 no.4 s.35
• /
• pp.345-354
• /
• 2005

Super resolution image reconstruction method refers to image processing algorithms that produce a high resolution(HR) image from observed several low resolution(LR) images of the same scene. This method has proven to be useful in many practical cases where multiple frames of the same scene can be obtained, such as satellite imaging, video surveillance, video enhancement and restoration, digital mosaicking, and medical imaging. In this paper, we applied the super resolution reconstruction method in spatial domain to video sequences. Test images are adjacently sampled images from continuous video sequences and are overlapped at high rate. We constructed the observation model between the HR images and LR images applied with the Maximum A Posteriori(MAP) reconstruction method which is one of the major methods in the super resolution grid construction. Based on the MAP method, we reconstructed high resolution images from low resolution images and compared the results with those from other known interpolation methods.

• Journal of Broadcast Engineering
• /
• v.18 no.4
• /
• pp.543-549
• /
• 2013

Motion artifacts of central and autonomic nervous system signals degrades the performance of the bio-signal based human factor analysis. Firstly, we propose a defining method of motion artifact section by analyzing successive image frames. Motion artifact section is defined when the amount of motion is greater than the pre-defined threshold. In here, the amount of motion is estimated by first derivation of image frames at temporal domain. Secondly, we propose another defining method of motion artifact section through designing 2D Gaussian probability density function model by analyzing feature vectors of one cycle of signal such as length and amplitude. The defined motion artifact sections are interpolated on the basis of 1D Gaussian function. At result of applying the method into photoplethysmography signal, we confirmed that the calculated heartbeat rate from the restored photoplethysmography came up to the one from electrocardiography. Also, we found that the video based method generated relatively more false acceptance of motion artifact section and the probability density function based method generated relatively more false rejection of motion artifact section.

• Archives of Plastic Surgery
• /
• v.39 no.6
• /
• pp.659-662
• /
• 2012

Progressive facial hemiatrophy, also known as Parry-Romberg syndrome, is a progressive and self-limited deformation of the subcutaneous tissue volume on one side of the face that creates craniofacial asymmetry. We present the case of a patient with a five-year history of progressive right facial hemiatrophy, who underwent facial volumetric restoration using cell-assisted lipotransfer (CAL), which consists of an autologous fat graft enriched with adipose-derived stem cells (ASCs) extracted from the same patient. ASCs have the capacity to differentiate into adipocytes. They also promote angiogenesis, release angiogenic growth factors, and some can survive as stem cells. The use of autologous fat as a filler in soft tissue atrophy has been satisfactory in patients with mild and moderate Parry-Romberg syndrome. Currently, CAL has showed promising results in the long term by decreasing the rate of fat reabsorption. The permanence and stability of the graft in all the injected areas has showed that autologous fat grafts enriched with stem cells could be a promising technique for the correction of defects caused by this syndrome.

• Journal of Ecology and Environment
• /
• v.38 no.1
• /
• pp.15-23
• /
• 2015

This study was conducted in an effort to provide important clues pertaining to the conservation and restoration of Aporia crataegi by identifying the spatial distribution characteristics of the current habitats, prospective habitats, and future habitats of A. crataegi in accordance with climate changes. To determine the distribution of A. crataegi, data from a total of 36 collecting points throughout South Korea, North Korea, China, Japan, Mongolia, and Russia are used. The spatial distributions of the data were examined through MaxEnt modeling. The distribution probability rates exceeded 75% at 18 locations among the 36 species occurrence locations, with Gangwon province showing the highest distribution probability in South Korea. The precision of the MaxEnt model was remarkably high, with an AUC value of 0.982. The variables that affect the potential distribution of A. crataegi by more than 10% are the degree of temperature seasonality, the amount of precipitation in the warmest quarter, the annual mean temperature, and the amount of precipitation in the driest month, in that order of importance. It was found that the future potential distribution area of A. crataegi continuously moves northward over time up to 2070s. In addition, the area of the potential distribution showing a habitable probability rate that exceeds 75% in northeast Asia was $28,492km^2$, where the area of potential distribution in the north part of Korean peninsula was $20.404km^2$ in size. Thus, it is anticipated that the most important future habitats of A. crataegi in the northeast Asia will be North and South Hamgyeong provinces and Ryanggang province near Mt. Baekdoosan in the northern area of the Korean peninsula.

• Journal of Conservation Science
• /
• v.29 no.4
• /
• pp.367-378
• /
• 2013

Microstructures and nonmetallic inclusions of five forged iron axes and one cast iron axe were analyzed. The axes were excavated from the Proto-Three Kingdom Period site located in Yangchon, Gimpo. The forging objects were made of almost pure iron and low carbon steel, and only one among five were quenched after its figuration. Malleable cast iron structures showing on the casting suggest that the decarbonized casting method were applied. According to the results of nonmetallic inclusion analysis, the axes were produced by hammering the iron bloom which was attained with low-temperature -solid-reduction-method. Showing higher Fe content over $SiO_2$, it is assumed that the re-collecting rate of Fe was low because of the insufficient forging temperature and the impurities were included during the smelting process. It is assumed that the lime was used as a preparation because of detecting high Ca contents.

• YAKHAK HOEJI
• /
• v.32 no.6
• /
• pp.402-414
• /
• 1988

In order to clarify the receptor types and mechanisms underlying the positive inotropic effect of dopamine on the mammalian ventricular myocardium, the action potential, its first derivatives and isometric contraction of the rabbit papillary muscle were recorded using a force transducer and glass capillary microelectrodes filled with 3M KCl. The results were as follows; (1) In normal Tyrode solution, the contractile force was increased and duration of action potential was shortened with increments of dopamine concentration ($10^{-6}-10^{-4}M$). (2) The dose-response curve was markedly shifted to the right by pretreatment with reserpine (5mg/kg i.p., 24hrs prior to the experiment). (3) In 19mM $K^+-Tyrode$ solution, the duration of action potential, maximum rate of rise (V_{max}) of action potential and overshoot were significantly increased with increments of dopamine concentration ($10^{-6}-10^{-4}M$). (4) The inotropic effect of dopamine on the rabbit papillary muscle pretreated with reserpine was antagonized by atenolol ($10^{-6}M$), but not by phentolamine ($3{\times}10^{-6}M$). (5) In rabbit papillary muscle partially depolarized by 19mM $K^+-Tyrode$ solution, slow electrical response (calcium mediated action potential) as well as contraction were restored by dopamine ($10^{-4}M$); this restoration was blocked by calcium antagonists ($3{\times}10^{-5}M$ $LaCl_3{\cdot}6H_2O$, $3{\times}10^{-6}M$ diltiazem) or ${\beta}-adrenoceptor$ antagonist ($3{\times}10^{-6}M$ atenolol), but not affected by ${\alpha}-adrenoceptor$ antagonist ($10^{-5}M$ phentolamine, $3{\times}10^{-6}M$ yohimbine) or vascular dopaminergic receptor antagonist ($10^{-5}M$ haloperidol). The above results may be interpreted as that the positive inotropic effect of dopamine through both direct and indirect action are caused by increase in slow inward current ($Ca^{2+}$ influx into themyocardial cell), and the direct action is mainly due to the stimulation of ${\beta}-adrenoceptors$ in the rabbit papillary muscle.

• Journal of Korean Neurosurgical Society
• /
• v.49 no.5
• /
• pp.273-277
• /
• 2011

Objective : A single balloon extrapedicular kyphoplasty has been introduced as one of the unilateral approaches for thoracic compression fractures; however, the unilateral extrapedicular technique in the lumbar area needs a further understanding of structures in the lumbar area. The purpose of the present study is to describe methods and pitfalls of this procedure based on the anatomy of the lumbar area and to analyze clinical outcome and complications. Methods : Anatomical evaluation was performed with 2 human cadavers. A retrospective review of unilateral extrapedicular approaches yielded 74 vertebral levels in 55 patients that were treated with unilateral extrapedicular vertebroplasty and kyphoplasty. Radiographic assessment included the restoration rate of vertebral height and correction of kyphosis. Results : Anatomical evaluation indicates that the safe needle entry zone of bone for the extrapedicular approach was located in the supero-lateral aspect of the junction between the pedicle and vertebral body. The unilateral extrapedicular procedure achieved adequate pain relief with a mean decreases in pain severity of $7.25{\pm}1.5$ and $2.0{\pm}1.4$, respectively. Complications were 1 retroperitoneal hematoma, 6 unilateral fillings and 3 epidural leak of the polymethylmethacrylate. Conclusion : The method of a unilateral extrapedicular approach in kyphoplasty and vertebroplasty in the lumbar area might be similar to that in thoracic approach using a route via the extrapedicular space. However, different anatomical characteristics of the lumbar area should be considered.