• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.2
• /
• pp.54-61
• /
• 2004

The engine-out flow is highly transient and hot, and may place tremendous thermal and inertial loads on a closed-coupled catalyst. Therefore, time-dependent and detailed flow and thermal field simulation may be crucial. The aim of this study is to develop combined chemical reaction and multi-dimensional fluid dynamic mathematical model and to study the effect of unsteady pulsating thermal and flow characteristics on thermal reliability of closed-coupled catalyst. The effect of cell density on the conversion performance under real running condition is also investigated. Unlike previous studies, the present study focuses on coupling between the problems of pulsating flow pattern and catalyst thermal response and conversion efficiency. The results are expressed in terms of temporal evolution of flow, pollutant and temperature distribution as well as transient characteristics of conversion efficiency. Fundamental understanding of the flow and thermal phenomena of closed-coupled catalyst under real running condition is presented. It is shown that instants of significantly low values of flow uniformity and conversion efficiency exist during exhaust blowdown and the temporal varaition of flow uniformity is very similar in pattern to one of conversion efficiency. It is also found that the location of hot spot in monolith is directly affected by transient flow pattern in closed-coupled catalyst.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.3
• /
• pp.206-214
• /
• 2020

This study examined the correlation between the respiratory pattern change (RPC) and abdominal mobility (AM) according to the positive result of the subjective lumbar instability factor (SLIF) in people with chronic low back pain (CLBP). Thirty-six adults with CLBP participated in this study. Twenty-eight items of the SLIFs were examined, and the subjects were divided into three groups according to the positive response numbers (PRN). After the change lists were scored, three RPC scores [costo-diaphragmatic RPC (CDRPC), breath hold change (BHC), and total RPC (TRPC)] were obtained. The abdominal mobility (AM) was measured between the maximal inspiration and exhalation at the xiphoid (AM1) and the 10^th rib (AM2) level of the trunk. The results showed that the RPC score and AM were compared according to the positive response number of SLIF, and the relationship between them was analyzed. A positive correlation was observed between the SLIF positive response number and CDRPC score, BHC score, and total RPC score, and a negative correlation was observed between the SLIFs positive response number and AM1 and AM2. Based on the results of this study, the combination of SLIF positive responses can be a predictor of non-physiological respiratory pattern changes in people with CLBP. Clinically, this prediction is expected to help save time for screening and improve the efficiency of therapy.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.6
• /
• pp.615-624
• /
• 2014

It has been well known the sloshing pressure has complex shape and various patterns. The pattern of sloshing pressure is variously characterized by the pressure amplitude, duration time and skewness. The structural response induced by the sloshing pressure is also affected by the pattern of sloshing pressure and the type of structural members. In order to understand the structural response by the perspective view of categorized pattern, it is more efficient to make simple sloshing pressure pattern than to reflect the complex pressure history. In this study, the sloshing pressures obtained by the small scale model test are simplified with respect to their duration and skewness. Dynamic analyses of Mark-III LNG CCS are then parametrically performed with the consideration of various types of sloshing impact. Meanwhile, the failure pressures given the duration and skewness are investigated after parametric calculations are conducted to investigate the effect of pressure parameters on the structural response.

• Proceedings of the IEEK Conference
• /
• 2003.11a
• /
• pp.61-64
• /
• 2003

In this paper, we implement PAMD(Positive Answering Machine Detection) for discrimination human and ARS. We are used Grunt detection, Glitch Noise detection and Tone detection for PAMD. It distinguishes voice signals from ring-back tone and glitch noise respectively. And as a second step, it judges whether human responses or ARS responses after integrating pattern changes like initial response period, the number of voice data, each time of voice data period and glitch noise. The accuracy is about 9375 in ASR and about 98％ in Mobile phone.

• Management Science and Financial Engineering
• /
• v.8 no.1
• /
• pp.53-75
• /
• 2002

In this Paper, an attempt is made to establish a learning framework for robust planning and real-time execution control. Necessary definitions and concepts are clearly presented to describe real-time operational control in response to Plan disruptions. A general mathematical framework for disruption recovery is also laid out. Global disruption model is decomposed into suitable number of local disruption models. Execution Pattern is designed to capture local disruptions using decomposed-reverse neural mappings, and to further demonstrate how the decomposed-reverse mappings could be applied for solving disrubtion recovery problems. Two decomposed-reverse neural mappings, N-K-M and M-K-N are employed to produce transportation solutions in react-time. A potential extension is also discussed using the proposed mapping principle and other hybrid heuristics. Experimental results are provided to verify the proposed approach.

• Journal of Acupuncture Research
• /
• v.21 no.2
• /
• pp.183-203
• /
• 2004

Objective : Tension-type headache is the most common headache. The objective of this study is to find the clinical manifestation of tension-type headache and correlation with autonomic bioelectric response. Methods : This observation was carried out on 60 patients with tension-type headache. We used headache questionnaire and the Autonomic Bioelectric Response recoder(ABR-2000) for this study. Results : 1. Distribution of sex & age : male : female=5 : 7, 50s&60s group (28.3%) 2. Duration of onset : over 5years(50%), over one years(83.4%) 3. Causes of illness : stress(58.3%), severe fatigue(53.5%), tension(33.3%) 4. Time of attack : irregular(56.7%), day time(16.7%) 5. Pattern of pain: heavy(31 people), stiffness of occipital region (27 people) tightening around the head(25 people) 6. Curve : 40%, 56.7%, 35.0% SL(Slope low) at peak 1, 2, 3/ SH&SI not found 7. Regulation : 16.7% RR(Regulation reverse) at peak 1, 25% RH(Regulation high) at peak 2, 15% RR(Regulation reverse) at peak 3 8. Graph : Activity-60.0%, 70.0%, 63.3% lowered reaction(L, LR, L!) at peak 1, 2, 3 Reactivity-83.3%, 95.0%, 93.3% lowered reaction at peak 1, 2, 3 Conclusion : We find tension-type headache has remarkable relativeness with autonomic bioelectric response.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.2
• /
• pp.264-269
• /
• 2005

Advances in sensors, actuators, and computers and developments In information systems offer unprecedented opportunities to implement highly ambitious automation, control and decision strategies. There are also new challenges and demands for control and automation in modern industrial practices. There is a growing need for an active participation from the information systems in industrial, manufacturing and process industry environments because currently there are many control problems. This paper provides pattern recognition to the monitoring system for solvent manufacturing process and shows performance in real-time response with multiple input signals. Data is teamed by a multilayer feedforward network trained by error-backpropagation. The two kinds of test results show that the trained network has the ability to show the current system status with different input data sets.

• Journal of Korea Multimedia Society
• /
• v.4 no.6
• /
• pp.489-499
• /
• 2001

This paper presents the SIC(Size-Interval-Count) prefetching system that can record the file access patterns of applications within a relatively small space of memory based on the repetitiveness of the file access patterns. The SICPS(SIC Prefetching System) is based on knowledge-based prefetching methods which includes high correctness in predicting future accesses of applications. The proposed system then uses the recorded file access patterns, referred to as "SIC access pattern information", to correctly predict the future accesses of the applications. The proposed prefetching system improved the response time by about 40% compared to the general file system and showed remarkable memory efficiency compared to the previously knowledge-based prefetching methods.

• Journal of Biomedical Engineering Research
• /
• v.18 no.3
• /
• pp.261-266
• /
• 1997

Nonevasive multifrequency microwave radiometry using coaxial waveguide antenna has been investigated for a homogeneous and four layer human body model. The coupling between coaxial waveguide antenna and a biological object was analyzed by use of the finite-difference time-domain(FDTD) method to obtain the absorbed power patterns in the media. The object studied in this paper was a homogeneous and four-layered lossy medium. The specific absorption rates(SAR) distribution which was corresponding to the temperature distribution was calculated in each region by use of the steady-state response in FDTD method. The SAR pattern of 1.2GHz was compared with that of 1.8GHz.

• Transactions of the Society of Information Storage Systems
• /
• v.10 no.2
• /
• pp.55-60
• /
• 2014

Laser projector has many advantages of high brightness, high resolution and small size, but the huge drawback of image degradation called speckle which generated by coherence of laser and roughness of surface interrupts their general use. There are many methods to reduce speckle pattern, but they need effective optical systems to realize display to the far field with huge volume. We designed speckle reduction element by using microlens with controlled curvature to reduce spatial coherence. Vibration element was also applied to reduce temporal coherence which considered response time of eye. Designed element was fabricated by simple reflow method and imprinting method. From the results, the fabricated element performed 48.33% of speckle reduction efficiency and 41.29% of optical efficiency with a single doublet lens.