• Journal of the Korean Data and Information Science Society
• /
• 제19권2호
• /
• pp.577-585
• /
• 2008

This paper suggests a marginal probability model for analyzing repeated polytomous response data when some factors are nested in others in treatment structures on a larger experimental unit. As a repeated measures factor, time is considered on a smaller experimental unit. So, two different experiment sizes are considered. Each size of experimental unit has its own design structure and treatment structure, and the marginal probability model can be constructed from the structures for each size of experimental unit. Weighted least squares(WLS) methods are used for estimating fixed effects in the suggested model.

• 한국자동차공학회논문집
• /
• 제13권6호
• /
• pp.48-55
• /
• 2005

In this paper, a mathematical model and a simulation method for the response time analysis of Local Interconnect Network(LIN) based network systems are proposed. Network-induced delays in a network based control system can vary widely according to the transmission time of message and the overhead time of transmission. Therefore, in order to design a distributed control system using LIN network, a method to predict and verify the timing behavior of LIN protocol is required at the network design phase. Furthermore, a simulation environment based on a timing model of LIN protocol is beneficial to predict the timing behavior of LIN. The model equation is formulated with six timing parameters deduced from timing properties of LIN specification. Additionally, LIN conformance test equations to verify LIN device driver are derived with timing constraints of the parameters. The proposed model equation and simulation method are validated with a result that is measured at real LIN based network system.

• International journal of advanced smart convergence
• /
• 제12권3호
• /
• pp.51-60
• /
• 2023

This study focuses on the design of a GPT-based system for relatively rapid technology credit assessment of SMEs. This system addresses the limitations of traditional time-consuming evaluation methods and proposes a GPT-based model to comprehensively evaluate the technological capabilities of SMEs. This model fine-tunes the GPT model to perform fast technical credit assessment on SME-specific text data. Also, It presents a system that automates technical credit evaluation of SMEs using GPT and LLM-based chatbot technology. This system relatively shortens the time required for technology credit evaluation of small and medium-sized enterprises compared to existing methods. This model quickly assesses the reliability of the technology in terms of usability of the base model.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제18권4호
• /
• pp.317-335
• /
• 2014

In this work, we investigate the global stability analysis of a viral infection model with antibody immune response. The incidence rate is given by a general function of the populations of the uninfected target cells, infected cells and free viruses. The model has been incorporated with two types of intracellular distributed time delays to describe the time required for viral contacting an uninfected cell and releasing new infectious viruses. We have established a set of conditions on the general incidence rate function and determined two threshold parameters $R_0$ (the basic infection reproduction number) and $R_1$ (the antibody immune response activation number) which are sufficient to determine the global dynamics of the model. The global asymptotic stability of the equilibria of the model has been proven by using Lyapunov theory and applying LaSalle's invariance principle.

• 대한조선학회논문집
• /
• 제57권5호
• /
• pp.305-311
• /
• 2020

This study presents a probabilistic time series forecast of ship structural response using Bayesian inference combined with Volterra linear model. The structural response of a ship exposed to irregular wave excitation was represented by a linear Volterra model and unknown uncertainties were taken care by probability distribution of time series. To achieve the goal, Volterra series of first order was expanded to a linear combination of Laguerre functions and the probability distribution of Laguerre coefficients is estimated using the prepared data by treating Laguerre coefficients as random variables. In order to check the validity of the proposed methodology, it was applied to a linear oscillator model containing damping uncertainties, and also applied to model test data obtained by segmented hull model of 400,000 DWT VLOC as a practical problem.

• Wind and Structures
• /
• 제36권2호
• /
• pp.133-147
• /
• 2023

The random vibration of saddle membrane structures under wind load is studied theoretically and experimentally. First, the nonlinear random vibration differential equations of saddle membrane structures under wind loads are established based on von Karman's large deflection theory, thin shell theory and potential flow theory. The probabilistic density function (PDF) and its corresponding statistical parameters of the displacement response of membrane structure are obtained by using the diffusion process theory and the Fokker Planck Kolmogorov equation method (FPK) to solve the equation. Furthermore, a wind tunnel test is carried out to obtain the displacement time history data of the test model under wind load, and the statistical characteristics of the displacement time history of the prototype model are obtained by similarity theory and probability statistics method. Finally, the rationality of the theoretical model is verified by comparing the experimental model with the theoretical model. The results show that the theoretical model agrees with the experimental model, and the random vibration response can be effectively reduced by increasing the initial pretension force and the rise-span ratio within a certain range. The research methods can provide a theoretical reference for the random vibration of the membrane structure, and also be the foundation of structural reliability of membrane structure based on wind-induced response.

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 1984년도 추계학술발표회논문집
• /
• pp.7-10
• /
• 1984

In this paper, the advantages of buffer insertion access method in comparison with other access methods to local area networks are analyzed. Sending and Receiving protocols in a data link layer are designed by a software method, We have derived both qeueing delays and the response time for the performance model that is proposed in this paper, and using the computer simulation, analyzed the performance for the proposed model in terms of the throughput rate- response time characteristrics. Based on the proposed model, the hardware design is implemented.

• 산업경영시스템학회지
• /
• 제26권3호
• /
• pp.1-9
• /
• 2003

Databases are central to business information systems and RDBMS is most widely used for the database system. Normalization was designed to control various anomalies (insert, update, delete anomalies). However, normalized database design does not account for the tradeoffs necessary for performance. In this research, I model a database design method considering denormalization of duplicating attributes in order to reduce frequent join processes. This model considers response time for processing each select, insert, update, delete transaction, and for treating anomalies. A branch and bound method is proposed for this model.

• 한국지리정보학회지
• /
• 제11권4호
• /
• pp.182-192
• /
• 2008

효율적인 방제전략 수립 지원시스템 개발의 일환으로 환경민감정보 기반의 유출유 확산예측 시스템과 피해위험도 예측시스템을 연계하여 인천-대산해역을 대상으로 해양오염 방제지원시스템의 프로토타입을 개발하였다. 유출유 확산예측시스템에서는 실시간 바람과 실시간 해수유동을 기반으로 유출유의 이동을 계산하고, 유출유 특성에 따라 해상 유출유의 풍화작용을 모델링하여 유출유의 잔류량 및 확산분포를 계산하였다. 유출유 확산예측의 실시간 바람은 국립환경과학원의 실시간 기상모델 결과를 ftp를 이용하여 실시간으로 연계하여 활용하며, 실시간 해수유동으로서 조류는 수치모델결과와 검조소 관측결과의 결합을 통해 실시간 조석을 예측하는 CHARRY(Current by Harmonic Response to the Reference Yardstick) 모델을 이용하여 예측하고, 실시간 취송류는 바람과 취송류간의 상관관계와 반응함수를 이용하여 예측하였다. 실시간 해수유동을 따라 이동하면서 풍화되는 유출유의 풍화작용은 유출유 특성에 따라 결정된 감소율을 적용하여 모델링하였다. 본 시스템은 GIS 기술을 이용하여 해양 정보를 ESI(Environmental Sensitivity Index) 및 방제자원 정보와 통합하고 종합적으로 제공함으로써 방제전략 수립을 지원할 수 있다.

• 대한기계학회논문집A
• /
• 제22권2호
• /
• pp.458-466
• /
• 1998

In this work, a frequency domain method is tested numerically and experimentally to improve nonlinear model parameters using the frequency response function at the nonlinear element connected point of structure. This method extends the force-state mapping technique, which fits the nonlinear element forces with time domain response data, into frequency domain manipulations. The force-state mapping method in the time domain has limitations when applying to complex real structures because it needd a time domain lumped parameter model. On the other hand, the frequency domain method is relatively easily applicable to a complex real structure having nonlinear elements since it uses the frequency response function of each substurcture. Since this mehtod is performed in frequency domain, the number of equations required to identify the unknown parameters can be easily increased as many as it needed, just by not only varying excitation amplitude bot also selecting excitation frequency domain method has some advantages over the classical force-state mapping technique in the number of data points needed in curve fit and the sensitivity to response noise.