• Steel and Composite Structures
• /
• 제14권6호
• /
• pp.621-636
• /
• 2013

Response modification factor is one of the seismic design parameters to consider nonlinear performance of building structures during strong earthquake, in conformity with the point that many seismic design codes led to reduce the loads. In the present paper it's tried to evaluate the response modification factors of dual moment resistant frame with buckling restrained braced (BRB). Since, the response modification factor depends on ductility and overstrength; the nonlinear static analysis, nonlinear dynamic analysis and linear dynamic analysis have been done on building models including multi-floors and different brace configurations (chevron V, invert V, diagonal and X bracing). The response modification factor for each of the BRBF dual systems has been determined separately, and the tentative value of 10.47 has been suggested for allowable stress design method. It is also included that the ductility, overstrength and response modification factors for all of the models were decreased when the height of the building was increased.

• 한국정보기술학회 영문논문지
• /
• 제8권2호
• /
• pp.79-87
• /
• 2018

The current PC user authentication uses character password based on user's knowledge. However, this can easily be exploited by password cracking or key-logging programs. In addition, the use of a difficult password and the periodic change of the password make it easy for the user to mistake exposing the password around the PC because it is difficult for the user to remember the password. In order to overcome this, we propose user gesture recognition and challenge-response authentication. We apply user's hand gesture instead of character password. In the challenge-response method, authentication is performed in the form of responding to a quiz, rather than using the same password every time. To apply the hand gesture to challenge-response authentication, the gesture is recognized and symbolized to be used in the quiz response. So we show that this method can be applied to PC user authentication.

• Structural Engineering and Mechanics
• /
• 제48권1호
• /
• pp.1-16
• /
• 2013

The seismic response of RC space frame structures with isolated footing resting on a shallow soil stratum on rock is presented in this paper. Homogeneous soil stratum of different stiffness in the very soft to stiff range is considered. Soil, footing and super structure are considered to be the parts of an integral system. A finite element model of the integrated system is developed and subjected to scaled acceleration time histories recorded during two different real earthquakes. Dynamic analysis is performed using mode superposition method of transient analysis. A parametric study is conducted to investigate the effect of flexibility of soil in the dynamic behaviour of low-rise building frames. The time histories and Fourier spectra of roof displacement, base shear and structural response quantities of the space frame on compliant base are presented and compared with the fixed base condition. Results indicate that the incorporation of soil flexibility is required for the realistic estimate of structural seismic response especially for single storey structures resting on very soft soil.

• Asian Journal of Innovation and Policy
• /
• 제4권3호
• /
• pp.397-409
• /
• 2015

Nowadays, crowdfunding presents a promising development. This research focuses on the influence of platform strategy and market response on the success of crowdfunding from the perspective of the elaboration likelihood model (ELM) theory. Detailed product specifications, crowdfunding difficulty coefficient, vivid advertising video such as introduction and music, and recommendations from relevant figures are all used to depict platform strategy. Meanwhile, we use the number of lovers, followers, comments and 1 RMB backers to measure the level of market response. And thus, we model the impact of platform strategy and market response on crowdfunding success with empirical studies based on 400 samples of observed value. We found firstly that there exist significant positive relations between the total amount of funds pledged and detailed product specification, vivid advertising video, recommendations from relevant figures and the number of 1 RMB backers. Secondly, the crowdfunding difficulty of projects affects negatively, and significantly, the total amount of funds pledged. Thirdly, the influence of the number of lovers and followers on funds pledged is not significant.

• Food Science and Biotechnology
• /
• 제18권1호
• /
• pp.31-35
• /
• 2009

Total folate content was determined by microbiological assay using Lactobacillus casei spp. rhamnosis (ATCC 7469) with a 96-well microplate technique. Using roasted peanut and red kidney beans as representative legume samples, response surface methodology (RSM) was supplied to optimize the trienzyme procedures for the determination of folate in legumes. After response surface regression (RSREG), the second-order polynomial equation was fitted to the experimental data. Ridge analysis showed that the optimal digestion times were <2 hr for $Pronase^{(R)}$ and $\alpha$-amylase, and <5 hr for conjugase to obtain maximal folate values for legume samples. This study confirms that established digestion times for cereal products (AOAC Method 2004.05) of 3 for protease and 2 hr for $\alpha$-amylase are applicable to legumes. Conjugase treatment can be reduced to 5 from 16 hr and the conjugase level to 5 from 20 mg per sample, providing significant cost saving.

• Wind and Structures
• /
• 제32권5호
• /
• pp.405-421
• /
• 2021

To gain insight into the wind-induced safety concerns associated with attached tower cranes during the construction of super-tall buildings, a 606 m level frame-core tube super-tall building is selected to investigate the wind-induced vibration response and fragility of an outer-attached tower crane at all stages of construction. The wind velocity time history samples are artificially generated and used to perform dynamic response analyses of the crane to observe the effects of wind velocity and wind direction under its working and non-working resting state. The adverse effects of the relative displacement response at different connection supports are also identified. The wind-resistant fragility curves of the crane are obtained by introducing the concept of incremental dynamic analysis. The results from the investigation indicate that a large relative displacement between the supports can substantially amplify the response of the crane at high levels. Such an effect becomes more serious when the lifting arm is perpendicular to the plane of the connection supports. The flexibility of super-tall buildings should be considered in the design of outer-attached tower cranes, especially for anchorage systems. Fragility analysis can be used to specify the maximum appropriate height of the tower crane for each performance level.

• Journal of Mechanical Science and Technology
• /
• 제15권8호
• /
• pp.1143-1155
• /
• 2001

In order to reduce the expensive CPU time for design sensitivity analysis in dynamic response optimization, this study introduces the design sensitivities approximated within estimated confidence radius in dynamic response optimization with ALM method. The confidence radius is estimated by the linear approximation with Hessian of quasi-Newton formula and qualifies the approximate gradient to be validly used during optimization process. In this study, if the design changes between consecutive iterations are within the estimated confidence radius, then the approximate gradients are accepted. Otherwise, the exact gradients are used such as analytical or finite differenced gradients. This hybrid design sensitivity analysis method is embedded in an in-house ALM based dynamic response optimizer, which solves three typical dynamic response optimization problems and one practical design problem for a tracked vehicle suspension system. The optimization results are compared with those of the conventional method that uses only exact gradients throughout optimization process. These comparisons show that the hybrid method is more efficient than the conventional method. Especially, in the tracked vehicle suspension system design, the proposed method yields 14 percent reduction of the total CPU time and the number of analyses than the conventional method, while giving similar optimum values.

• Nuclear Engineering and Technology
• /
• 제51권7호
• /
• pp.1791-1798
• /
• 2019

Instrumentation and Control (I&C) systems of nuclear power plants (NPPs) have been continuously digitalized. These systems have a critical role in the operation of nuclear facilities by functioning as the brain of NPPs. In recent years, as cyber security threats to NPP systems have increased, regulatory and policy-related organizations around the world, including the International Atomic Energy Agency (IAEA), Nuclear Regulatory Commission (NRC) and Korea Institute of Nuclear Nonproliferation and Control (KINAC), have emphasized the importance of nuclear cyber security by publishing cyber security guidelines and recommending cyber security requirements for NPP facilities. As described in NRC Regulatory Guide (Reg) 5.71 and KINAC RS015, challenge response authentication should be applied to the critical digital I&C system of NPPs to satisfy the cyber security requirements. There have been no cases in which the most robust response authentication technology like challenge response has been developed and applied to nuclear I&C systems. This paper presents a challenge response authentication mechanism for a Programmable Logic Controller (PLC) system used as a control system in the safety system of the Advanced Power Reactor (APR) 1400 NPP.

• Earthquakes and Structures
• /
• 제16권6호
• /
• pp.641-654
• /
• 2019

This paper investigates the seismic response of a typical non-navigable continuous girder bridge isolated with friction sliding bearings of the Hong Kong-Zhuhai-Macao link projects in China. The effectiveness of the friction pendulum system (FPS) and accuracy of the numerical model were evaluated by a 1/20 scaled bridge model using shaking table tests. Based on the hysteretic properties of friction pendulum system (FPS), double concave friction pendulum (DCFP), and triple friction pendulum system (TFPS), seismic response analyses of isolated bridges with the three sliding-type bearings are systematically carried out considering soil-pile interaction under offshore soft clay conditions. The fast nonlinear analysis (FNA) method and response spectrum are employed to investigate the seismic response of isolated offshore bridge structures. The numerical results show that the implementation of the three sliding-type bearings effectively reduce the base shear and bending moment of the reinforced concrete pier, at the cost of increasing the absolute displacement of the bridge superstructure. Furthermore, the TFPS and DCFP bearings show better isolation effect than FPS bearing for the example continuous girder bridge.

• Wind and Structures
• /
• 제37권1호
• /
• pp.1-13
• /
• 2023

Due to the irregular shape and the deviation of stiffness center and gravity center, buildings always suffer from complex surface load and vibration response under wind action. This study is dedicated to analyze the surface wind load and wind-induced response of an irregular building, and to discuss the possibility of top swimming pool as a TLD to diminish wind-induced vibration of the structure. Wind tunnel test was carried out on a hotel with irregular shape to analyze the wind load and structural response under 8 wind incident angles. Then a precise numerical model was established and calibrated through experimental results. The top swimming pool was designed according to the principle of frequency modulation, and equations of motion of the control system were derived theoretically. Finally, the wind induced response of the structure controlled by the pool was calculated numerically. The results show that both of wind loads and wind-induced responses of the structure are significantly different with wind incident angle varies, and the across-wind response is nonnegligible. The top swimming pool has acceptable damping effect, and can be designed as TLD to mitigate wind response.