• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.30 no.7 s.250
• /
• pp.603-611
• /
• 2006

This paper presents the response surface optimization method using three-dimensional Wavier-Stokes analysis to optimize the blade shape of an axial flow fan. Reynolds-averaged Wavier-Stokes equations with $k-{\epsilon}$ turbulence model are discretized with finite volume approximations using the unstructured grid. Regression analysis is used for generating response surface, and it is validated by ANOVA and t-statistics. Four geometric variables, i.e., sweep and lean angles at mean and tip respectively were employed to improve the efficiency. The computational results are compared with experimental data and the comparisons show generally good agreements. As a main result of the optimization, the total efficiency was successfully improved. Also, detailed effects of sweep and lean on the axial flow fan are discussed.

• 한국전산유체공학회:학술대회논문집
• /
• 2000.10a
• /
• pp.46-53
• /
• 2000

To improve the performance at all design points, multi-point optimization method is implemented for the nose fairing shape design of space launcher. The response surface method is used to effectively reduce the huge computational loads during the optimization process. The drag is selected as the objective function, and the surface heat transfer characteristics, and the internal volume of the nose fairing ate considered as design constraints. Full Wavier-Stokes equations are selected as governing equations. Two points drag minimization, and two points drag / heat flux optimization were successfully performed and configurations which have good performance for the wide operation range were derived. By considering three design points, the space launcher shape which undergoes the least drag during whole flight mission was designed. For all the design cases, the constructed response surfaces show good confidence level with only 23 design points with the proper stretching of the design space.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.7
• /
• pp.940-947
• /
• 2004

In this paper, an optimum design problem for endosseous implant in dentistry is studied to find best implant design. An optimum design problem is formulated to reduce stresses arising at the cortical as well as cancellous bones, in which sufficient design parameters are chosen for design definition that encompasses major implants in popular use. Optimization at once (OAO) with the large number of design variables, however, causes too costly solution or even failure to converge. A concept of multilevel optimization (MLO) is employed to this end, which is to group the design variables of similar nature, solve the sub-problem of smaller size for each group in sequence, and this is iterated until convergence. Each sub-problem is solved based on the response surface method (RSM) due to its efficiency for small sized problem.

• Composites Research
• /
• v.28 no.5
• /
• pp.297-310
• /
• 2015

This study aims to develop efficient composite laminates for buckling load enhancement, interlaminar shear stress minimization, and weight reduction. This goal is achieved through cover-skin lay-ups around skins and stiffeners, which amplify bending stiffness and defer delamination by means of effective stress distribution. The design problem is formulated as multi-objective optimization that maximizes buckling load capability while minimizing both maximum out-of-plane shear stress and panel weight. For efficient optimization, response surface methodology is employed for buckling load, two out-of-plane shear stresses, and panel weight with respect to one ply thickness, six fiber orientations of a skin, and four stiffener heights. Numerical results show that skin-covered composite stiffened panels can be devised for maximum buckling load and minimum interlaminar shear stresses under compressive load. In addition, the effects of different material properties are investigated and compared. The obtained results reveal that the composite stiffened panel with Kevlar material is the most effective design.

• 유체기계공업학회:학술대회논문집
• /
• 2004.12a
• /
• pp.578-582
• /
• 2004

This paper presents the response surface optimization method using three-dimensional Navier-Stokes Analysis to optimize the shape of a axial flow fan. Reynolds-averaged Navier-Stokes equations with k-$\epsilon$ turbulence model are discretized with finite volume approximations. Regression analysis is used for generating response surface, and it is validated by ANOVA. Five geometric variables, i.e., distribution of sweep angle at mean and tip, lean angle at mean and tip, and spanwise location of mean were employed to optimize the efficiency. The computational results are compared with experiment data. As a main result of the optimization, the efficiency was successfully improved.

• Journal of computational fluids engineering
• /
• v.14 no.2
• /
• pp.25-31
• /
• 2009

Numerical optimization of rotor blade airfoils is performed with a response surface method for helicopter rotor. For the baseline airfoils, OA 312, OA 309, and OA 407 airfoils are selected and optimized to improve aerodynamic performance. Aerodynamic coefficients required for the response surface method are obtained by using Navier-Stokes solver with k-$\omega$ Shear Stress Transport turbulence model. An optimized airfoil has increased drag divergence Mach number. The present design optimization method can generate an optimized airfoil with multiple design constraints, whenever it is designed from different baseline airfoils at the same design condition.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.1023-1028
• /
• 2004

A micro-pressure wave is generated by the high-speed train which enters a tunnel, and it causes explosive noise and vibration at the exit. It is known that train speed, train-tunnel area ratio, nose slenderness and nose shape mainly influence on generating micro-pressure wave. So it is required to minimize it by searching optimal values of such train shape factors and tunnel condition. In this study, response surface model, one of approximation models, is used to perform optimization effectively and analyze sensitivity of design variables. Owen's randomized orthogonal array and D-optimal Design are used to construct response surface model. In order to increase accuracy of model, stepwise regression is selected. Finally SQP(Sequential Quadratic Programming) optimization algorithm is used to minimize the maximum micro-pressure wave by using built approximation model.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.51 no.2
• /
• pp.55-60
• /
• 2002

This paper presents an optimization procedure by using Response Surface Methodology(RSM) to determine design parameters for reducing cogging torque. RSM is achieved through using the experimental design method in combination with Finite Element Method and adapted to make analytical model for a complex problem considering a lot of interaction of these parameters. Sequential Quadratic Problem (SQP) method is used to solve the relsulting of constrained nonlinear optimization problem.

• Journal of Magnetics
• /
• v.20 no.2
• /
• pp.193-200
• /
• 2015

Direct-acting solenoid valves are used in the automotive industry due to their simple structure and quick response in controlling the flow of fluid. We performed an optimization study of response time in order to improve the dynamic performance of a direct-acting solenoid valve. For the optimal design process, we used the commercial optimization software PIAnO, which provides various tools for efficient optimization including design of experiments (DOE), approximation techniques, and a design optimization algorithm. 35 sampling points of computational experiments are performed to find the optimum values of the design variables. In all cases, ANSYS Maxwell electromagnetic analysis software was used to model the electromagnetic dynamics. An approximate model generated from the electromagnetic analysis was estimated and used for the optimization. The best optimization model was selected using the verified approximation model called the Kriging model, and an optimization algorithm called the progressive quadratic response surface method (PQRSM).

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1257-1260
• /
• 2005

Grinding process has unique characteristics compared with other machining processes. The cutting edges of the grinding wheel don't have uniformity and act differently on the workpiece at each grinding. The response surface analysis is one of various methods for optimizing and evaluating the process parameters to achieve the desired output. In this study, the effect of the grinding parameters on outcomes of the surface grinding was analyzed experimently. To predict the grinding outcomes and to select the grinding conditions before grinding, the second-order response surface models for the grinding force and the surface roughness were developed.