• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.14 no.2
• /
• pp.69-79
• /
• 2009

Major and trace elements were analyzed in three core sediments to investigate geochemical characteristics of East Sea sediments and provenance changes during late Quaternary in Ulleung Basin. Comparing with Yellow and South Sea sediments, contents of major elements were generally similar while contents of trace elements were significantly different. Furthermore, within this basin, there were some variabilities in trace element compositions. In the western slope sediments (WS), Mo was enriched over 6 times as much as other sites. On the other hand, Zr, Nb, Hf and Ta were enriched in basin sediments (Basin), and Ca and Cs were enriched in southern slope sediments (SS). After excluding elements derived from biogenic, authigenic and diagenetic origins, the lithogenic elements (K, Ti, Cs, Zr, Nb, Hf and Ta) could be classified into three groups from the comparison of element/Al ratios among cores. The first group consisted of elements (K and Ti) that showed the nearly similar element/Al ratios among three cores. The second group contained Cs which showed significant difference between two slope sediments. The third group elements (Zr, Nb, Hf and Ta) showed highly enriched in basin relative to both slope areas. The depth profiles of metal/Al ratios in basin sediments provided the following interpretation for the compositions of sediment and their variation. From 10,000 yr B.P. to 7,000 yr B.P. two lithogenic components (volcanic ashes and western slope sediments) were mixed and deposited in the basin. After 7,000 yr B.P., however, southern slope sediments were mixed with volcanic ashes and deposited in basin area. This event of source change is nearly close to inflow period of the Tsushima Warm Current to Ulleung Basin. Thus, it might be suggested that element geochemistry in Ulleung basin sediment indicate the change of current system in the study area.

• Journal of Korean Society of Forest Science
• /
• v.110 no.4
• /
• pp.678-688
• /
• 2021

This study was conducted to provide growth characteristics and stand information in preparation for natural regeneration method and silvicultural treatment of seed tree method in Korean red pine stands by using the field inventoried data 18 years after the seed tree regeneration method in 2001 and analyzing the stand and sapling characteristics. The study area was located in the Research Forest of Kangwon National University, Chuncheon-si, Gangwon-do. In November 2018, we collected tree measurement factors, such as diameter at breast height (DBH), height, crown class, stem quality, tree age, and annual height increment on the established plots. We calculated the basal area, volume, height-diameter ratio (HD ratio), and additional stand density variables such as the relative density and %stocking to analyze the managed stands. The number of mother trees was 58 trees/ha, with a 17.7% stocking level, whereas the number of saplings was 2,330 trees/ha, with a 79.0% stocking level. In germination, the age distribution of saplings ranged from 2001 to 2007, with most belonging to 15-16 years. The development condition of saplings was 10 cm in DBH and 8 m in height. DBH and height were higher as the crown class is more dominant, and this difference was statistically significant in the analysis of variance and Duncan's multiple comparison test (p<0.0001). HD ratio ranged mostly between 80% and 90%, and more than 95% of sapling stems were of high quality, with a straight, unbroken top, non-sweep, and non-diseased stem. On average, the annual height increment of saplings was 21.9 cm at 1 year, 43.3 cm at 5 years, 54.3 cm at 10 years, and 64.3 cm at 15 years. The overall height growth with age increased smoothly. According to the analysis of covariance, the annual height growth by crown class differed significantly. The regression analysis parameters revealed that annual height growth increased with age and dominant crown class.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.57 no.4
• /
• pp.424-429
• /
• 2012

This study was carried out to investigate the influence of different planting time on the synthesis of isoflavone in black soybean, Three varieties used in this experiment were lpumgeomjeongkong, Cheongjakong and Heugcheongkong which had different ecotypes, repectively. Seeds were sown at different time, May 15th, May 30th and June 15th with planting density of $60{\times}15cm$. In order to analyze the content of isoflavone, we collected sample every 5 days from 30 days after flowering to harvest and analyzed them with UPLC. As sowing was delayed, the content of isoflavone increased in all of three varieties. The content of genistein was greater than daidzein and glycitein. Increase of Glycitein was not distinct from 55 days after flowering(DAF) and it was stable against temperature change during the seed developing period. Although the content of genistein in Ilpumgeomjeongkong from 50 to 55 DAF, in Cheongjakong from 40 to 55 DAF and in Heugcheongkong from 60 to 65 DAF was lower than the content of daidzein, it was higher than that of daidzein afterward. In the statistical analysis on the relationship between average temperature and the content of aglycone isoflavone at 5-day intervals from 30 DAF during the grain filling period, genistein in Ilpumgeomjeongkong showed meaningful correlation as y=-15.28x+407.9 ($R^2=0.505^*$), diadzein in Cheongjakong showed meaningful correlation as y=-6.188x-164.5($R^2=0.454^*$), and genistein showed significantly high correlation as y=-11.59x+297.6 ($R^2=0.545^{**}$). Taking all the above results into consideration, it was suggested that the regions suitable for high content of isoflavone in black soybean be the northern area of Gyeonggi-do and Gangwon-do, Chungcheongbuk-do and inland area of Gyeongsangbuk-do, where are relatively low average temperature from flowering stage($R_2$) during the grain filling period.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.6
• /
• pp.759-765
• /
• 2012

This study was performed to investigate improvements in diabetes mellitus by extracts of yacon in streptozotocin (STZ)-induced diabetic rats. Fifty rats were divided into a normal group and four experimental groups. STZ (45 mg/kg) was injected intraperitoneally to induce type I diabetes in the four experimental groups. Yacon extracts were administered for 5 weeks. Forty-five ICR mice were also divided into one positive control group and four experimental groups for the oral glucose tolerance test (OGTT) after fed yacon extract. The control group did not eat any yacon extracts, while Group 1 (GI) was fed 125 mg/kg of yacon extracts, Group 2 (GII) was fed 250 mg/kg of yacon extracts, and Group 3 (GIII) was fed 500 mg/kg of yacon extracts. After treatment for 5 weeks, blood glucose in GIII group showed decreased tendency at the 5 week. In OGTT by glucose, the glucose level of yacon treatment group in diabetic rats was significantly decreased compared to the glucose level of the control group, but there was no difference in OGTT by maltose. In ICR mice, the glucose level of the experimental group in OGTT by maltose was significantly decreased compared to the control group. The area of the islets of Langerhans was increased by yacon treatment in a dose-dependent manner on diabetic rats. Insulin concentration of the GIII group was also decreased compared to the control group, while the concentration of fructosamine, total cholesterol, and triglycerides in serum showed no difference. OGTT by glucose or maltose in ICR mice or diabetic rats, area of the Islets of Langerhans, and insulin concentration improved. Yacon treatment may be a useful therapeutic and preventive strategy for diabetes mellitus.

• Journal of Bio-Environment Control
• /
• v.12 no.2
• /
• pp.68-71
• /
• 2003

Experiments were conducted to investigate optimal ionic salt strength in nutrient solution for small plug seedlings of ‘Nokgwang’ and ‘Kwari’ green pepper. Plant height increased with increasing ionic salt strength. total leaf area was 72％ greater in ‘Nokgwang’ and 18% greater in ‘Kwari’with 2.0 ionic salt strength than that with 1.0 strength. Dry weight per plant tended to increase at higher ionic salt strengths in ‘Kwari’, but to decrease in ‘Nokgwang’ Chlorophyll content increased with increasing ionic salt strength in both cultivars. Photosynthetic rate, stomatal conductance, and transpiration rate were higher for plants fertilized with 1.5 strength than other strengths in both cultivars. Photosynthetic rate peaked at 8.74 $\mu$mol$.$m$^{-2}$ s$^{-1}$ in ‘Nokgwang’ and 5.70 $\mu$mol$.$m$^{-2}$ s$^{-1}$ in‘Kwari’with 1.5 ionic salt strength.

• Korean Journal of Ecology and Environment
• /
• v.50 no.1
• /
• pp.96-115
• /
• 2017

Understanding effects of thermal pollution and acidification has long been a concern of aquatic ecologists, but it remains largely unknown in Korea. This study was performed to elucidate the effects of thermal wastewater effluent (TWE) and acid rain on water quality and attached algae in a small mountain stream, the Buso Stream, a tributary located in the Hantan River basin. A total of five study sites were selected in the upstream area including the inflowing point of hot-spring wastewater (HSW), one upstream site (BSU), and three sites below thermal effluent merged into the stream (1 m, 10 m and 300 m for BSD1, BSD2, and BSD3, respectively). Field surveys and laboratory analyses were carried out every month from December 2015 to September 2016. Water temperature ranged $1.7{\sim}28.8^{\circ}C$ with a mean of $15.0^{\circ}C$ among all sites. Due to the effect of thermal effluent, water temperature at HSW site was sustained at high level during the study period from $17.5^{\circ}C$ (January) to $28.8^{\circ}C$ (September) with a mean of $24.2{\pm}3.7^{\circ}C$, which was significantly higher than other sites. Thermal wastewater effluent also brought in high concentration of nutrients(N, P). The effect of TWE was particularly apparent during dry season and low temperature period (December~March). Temperature effect of TWE did not last toward downstream, while nutrient effect seemed to maintain in longer distance. pH ranged 5.1~8.4 with a mean of 6.9 among all sites during the study period. The pH decrease was attributed to seasonal acid rain and snow fall, and their effects was identified by acidophilic diatoms dominated mainly by Eunotia pectinalis and Tabellaria flocculosa during March and August. These findings indicated that water quality and periphyton assemblages in the upstream region of Buso Stream were affected by thermal pollution, eutrophication, and acidification, and their confounding effects were seasonally variable.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2004.08a
• /
• pp.104-117
• /
• 2004

Dmitri Donskoi, which went down during the Russo-Japanese War occurred 100 years ago, was found by using geophysical exploration techniques at the 400 m water depth of submarine valley off Jeodong of Ulleung Island. In the submarine area with the rugged seabed topography and volcanic seamounts, in particular, the reliable seabed images were acquired by using the mid-to-shallow Multibeam exploration technique The strength of corrosion (causticity) of the sunken Donskoi, measured by the electrochemical method, decreased to 2/5 compared with the original strength.

• Korean Journal of Environment and Ecology
• /
• v.23 no.6
• /
• pp.528-534
• /
• 2009

Styan's Grasshopper Warblers (Locustella pleskei) are vulnerable species distributed in East-Asia only. Its known breeding sites in Korea are remote islets including Hongdo Islet, Chilbal Islet, Mara Islet, and Chuja Islets, and, therefore, the breeding biology of this species is still poorly known. This study was conducted on Mara Islet (N $33^{\circ}$ 06', E $126^{\circ}$ 16') from May to September 2008 to investigate the breeding status and breeding site characteristics of the grasshopper warblers. A total of 11 breeding pairs and their nests were found on trees and shrubs at artificially planted forests and hedges of Pinus thunbergii. The grasshopper warblers preferentially utilized the shrub trees for nesting places, and major nesting trees were Camellia japonica, Pittosporum tobira and Pinus thunbergii as nesting trees. Average heights of nesting trees and nests were $2.77{\pm}1.10m$ and $1.75{\pm}0.56m$, respectively. The grasshopper warblers selected lower shrubs and trees for nesting than randomly selected ones around them, probably to avoid strong and prevailed winds in flat and un vegetated environments on Mara Islet. The shape of nests was a round bowl-type, and measurements of nests were $11.9{\pm}0.5cm$ in exterior nest diameter, $11.1{\pm}1.1cm$ in height of exterior nest, $5.8{\pm}0.4cm$ in interior nest depth, and 6.0cm in interior nest diameter. It incubated eggs until the early August on Mara islet, and incubation periods of Mara Islet was possibly later than that of other areas. Furthermore, the clutch size in the study area was three, and they laid smaller number of eggs than normal clutch size (4~5 eggs) reported in other areas. Although we could not observe any nest predator on this species in the study area, selective cutting and pruning of trees will diminish dense shrub layer of forests. Therefore, it may affect the breeding of this threatened species which prefers dense shrubs of artificially planted forest of Pinus thunbergii. This study suggests that detailed and consistent further research on breeding biology and habitats of the grasshopper warblers are needed to conserve and manage of Pinus thunbergii forests on Mara Islet as an important breeding site of Styan's Grasshopper Warblers.

• Economic and Environmental Geology
• /
• v.49 no.5
• /
• pp.389-410
• /
• 2016

Wide ranges of fission-track (FT) ages were obtained from the Jurassic granite batholith in Jeonju-Gimje-Jeongeup area, southwestern Okcheon Belt: sphene=158~70 Ma; zircon=127~71 Ma; apatite=72~46 Ma. Thermochronological analyses based on undisturbed primary cooling and reset or partially-reduced FT ages, and some track-length data reveal complicated thermal histories of the granite. The overall cooling of the batholith is characterized by a relatively rapid earlier-cooling (${\sim}20^{\circ}/Ma$) to $300^{\circ}C$ isotherm since its crystallization and a very slow later-cooling ($2.0{\sim}1.5^{\circ}/Ma$) through the $300^{\circ}C-200^{\circ}C-100^{\circ}C$ isotherms to the present surface temperature. It is indicated that the large part of Jurassic granitic body experienced different level of elevated temperatures at least above $170^{\circ}C$ (maximum>$330^{\circ}C$) by a series of igneous activities in late Cretaceous. Consistent FT zircon ages from duplicate measurements for two sites of later igneous bodies define their formation ages: e.g., quartz porphyry=$73{\pm}3Ma$; diorite=$73{\pm}2Ma$; rhyolite=$72{\pm}3Ma$; feldspar porphyry=$78{\pm}4Ma$ (total weighted average=$73{\pm}3Ma$). Intrusions of these later igneous bodies and pegmatitic dyke swarms might play important roles in later thermal rise over the study area including hot-spring districts (e.g., Hwasim, Jukrim, Mogyokri, Hoebong etc.). On the basis of an assumption that the latercooling of granite batholith was essentially controlled by the denudation of overlying crust, the uplift since early Cretaceous was very slow with a mean rate of ~0.05 mm/year (i.e., ~50 m/Ma). Estimates of total uplifts since 100 Ma, 70 Ma and 40 Ma to present-day are ~5 km, ~3.5 km and ~2 km, respectively. The consistent values of total uplifts from different locations may suggest a regional plateau uplift with a uniform rate over the whole granitic body.

• Geophysics and Geophysical Exploration
• /
• v.11 no.4
• /
• pp.350-360
• /
• 2008

Electrical resistivity is one of physical property of the earth and measured by electrical resistivity survey, electrical resistivity logging and laboratory test. Recently, electrical resistivity is widely used in determination of rock quality in support pattern design of road and railway tunnel construction sites. To get more reliable rock quality data from electrical resistivity, it needs a lot of test and study on correlation of resistivity and rock quality. Firstly, we did rock property test in laboratory, such as P wave velocity, Young's modulus, uniaxial compressive strength (UCS) and electrical resistivity. We correlate each test results and we found out that electrical resistivity has highly related to P wave velocity, Young's modulus and UCS. Next, we accomplished electrical resistivity survey in field site and carried out electrical resistivity logging at in-situ area. We also performed rock classification, such as RQD, RMR and Q-system and we correlate electrical resistivity to RMR data. We found out that electrical resistivity logging data are highly correlate to RMR. Also we found out that electrical resistivity survey data are lower than electrical resistivity logging data when there are faults or fractures. And it cause electrical resistivity survey data to lowly correlate to RMR.