• Resources Recycling
• /
• v.18 no.3
• /
• pp.27-35
• /
• 2009

To solve resource exhaustion and waste management problems caused by mass consumption, there are many efforts to change from resource consumption system to recycling system. Specially, interests about management of construction waste have increased, but efficient recycling system of waste concrete is not established yet. In this study, high quality recycled aggregate processing circuit was developed to recycle waste concrete. From the waste concrete which is a hydrated compound with coarse aggregate, fine aggregate, and cement material, high quality recycled coarse aggregate for concrete making was produced by autogenous milling and heat pretreatment method. After then, refinement process was performed to separate fine aggregate and cement material from waste concrete fines by sink float separation and hindered-settling separation. As a result, high quality recycled aggregate was produced from waste concrete by developed processing circuit.

• Resources Recycling
• /
• v.20 no.6
• /
• pp.43-49
• /
• 2011

This study calculated the three indices of Korea's resource productivity (and raw material productivity), material circulation rate and decoupling factor to evaluate the sustainability of domestic economic activities and resource consumption and examine the extent of dematerialization. Korea's resource productivity improved 22% from 1.32 million KRW/ton in 2000 to 1.61 million KRW/ton in 2007, with the annual average growth of resource productivity during the period standing at 2.88%. Raw material inputs accounted for 73-76% of domestic material consumption (DMC); raw material productivity for the year 2007 was 2.11 million KRW/ton, growing 3% on annual average from 2000 through 2007. The wastes released are circulated into the economic system through recycling and energization. Korea's material circulation went up from 10.9% in 2000 to 15.6% in 2007, growing by an annual average of 5.3% during the period. The rate of change in year-on-year growth, however, was found to be on the gradual decrease. This study also showed that Korea's economic activities were decoupled with its resource consumption as the country heads toward dematerialization through sustainable resource management.

• Journal of Korea Water Resources Association
• /
• v.52 no.3
• /
• pp.219-226
• /
• 2019

Recently, research about Low-Impact Development (LID) techniques has been expanded due to problems with the effects of climate change and urbanization that have been increasing. LID technology is used to control flood damage environmentally to reduce runoff and is reduce runoff on city also restore into previous water circulation system from present developed city. However, studies about quantitative data of LID techniques are insufficient. Therefore in this study, the Curve Number (CN) was calculated with the Planter Box, which is storage type LID technology to conduct the water circulation (infiltration, runoff, overflow) analysis. Rainfall intensity scenario (60.4 mm/hr, 83.1 mm/hr, 97.4 mm/hr, 108.2 mm/hr) about water circulation analysis of Planter Box is selected on the basis of probable rainfall intensity table. According to the experimental results, the storage rate of rainwater in Building Planter Box and Street Planter Box was 43.5% to 52.9% and 33.4% to 39%, respectively. In addition, CN value is estimated to 83 at the Planter box and the runoff reduction effect by applying Horton's infiltration capacity curve showed on 51% to 98%.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.486-486
• /
• 2018

During the post green revolution era, wheat and rice were the main crops of concern to cater the food security issues of Pakistan. The use of semi dwarf high yielding varieties along with extensive use of fertilizers and surface and ground water lead to substantial increase in crop production. However, the higher crop productivity came at the cost of over exploitation of the precious land and water resources, which ultimately has resulted in the dwindling production rates, loss of soil fertility, and qualitative and quantitative deterioration of both surface and ground water bodies. Recently, during the past two decades, severe climate changes are further pushing the Pakistan's wheat-rice system towards its limits. This necessitates a careful analysis of the current crop water requirements and water footprints (both green and blue) to project the future trends under the most likely climate change phenomenon. This was done by using the FAO developed CROPWAT model v 8.0, coupled with the statistically-downscaled climate projections from the 8 Global Circulation Models (GCMs), for the two future time slices, 2030s (2021-2050) and 2060s (2051-2080), under the two Representative Concentration Pathways (RCPs): 4.5 and 8.5. The wheat-rice production system of Punjab, Pakistan was considered as a case study in exploration of how the changing climate might influence the crop water requirements and water footprints of the two major crops. Under the worst, most likely future scenario of temperature rise and rainfall reduction, the crop water requirements and water footprints, especially blue, increased, owing to the elevated irrigation demands originating from the accelerated evapotranspiration rates. A probable increase in rainfall as envisaged by some GCMs may partly alleviate the adverse impacts of the temperature rise but the higher uncertainties associated with the predicated rainfall patterns is worth considering before reaching a final conclusion. The total water footprints were continuously increasing implying that future climate would profoundly influence the crop evapotranspiration demands. The results highlighted the significance of the irrigation water availability in order to sustain and improve the wheat-rice production system of Punjab, Pakistan.

• Journal of Microbiology and Biotechnology
• /
• v.14 no.6
• /
• pp.1150-1156
• /
• 2004

The GMO (Genetically Modified Organism) labeling system on raw materials has been in Korea since March 2001, and genetically modified organisms (GMOs)-derived foods since July 2001. Therefore, we designed a multiplex PCR method to ascertain the validity of the labeling system and to monitor the status of circulation for genetically modified maize (GM Maize). Five lines of GM Maize (GA21, TC1507, Mon810, NK603, and Bt176) were used, and specific primer pairs were designed to detect each line. Using this method, the different lines of GM Maize were monitored from raw products and processed foods in Korean market. Some of the maize processed foods and raw materials were shown to contain more than one foreign gene. This method was found to be effective for-detecting five different GM Maize in a single reaction.

• Journal of the Korea Safety Management & Science
• /
• v.9 no.4
• /
• pp.71-82
• /
• 2007

For a sustainable development, the resources circulation system should be established and an environment-conscious activities are required at the same time. These activities should be also implemented in logistics area. Especially, green procurement activities in inbound logistics is recognized as a very important factors in the early phase of an environment-conscious activities. In this paper, we are to suggest the direction through statistical analysis of effects, and cause of influences of environmental procurement logistics activities on logistics performance by environmental logistics strategy and by the size of enterprises, and by Environmental Management System. This study was conducted with the subjects of manufacturing enterprises with concurrent reviews of literature and statistical analysis, and the meaning of this study would be the analysis of the influencers of environment-conscious procurement logistics activities on logistics performance different from existing logistics studies.

• Journal of Environmental Policy
• /
• v.9 no.2
• /
• pp.157-184
• /
• 2010

Global climate change is destroying the water circulation balance by changing rates of precipitation, recharge and discharge, and evapotranspiration. The Intergovernmental Panel on Climate Change (IPCC 2007) makes "changes in rainfall pattern due to climate system changes and consequent shortage of available water resource" a high priority as the weakest part among the effects of human environment caused by future climate changes. Groundwater, which occupies a considerable portion of the world's water resources, is related to climate change via surface water such as rivers, lakes, and marshes, and "direct" interactions, being indirectly affected through recharge. Therefore, in order to quantify the effects of climate change on groundwater resources, it is necessary to not only predict the main variables of climate change but to also accurately predict the underground rainfall recharge quantity. In this paper, the authors selected a relevant climate change scenario, In this context, the authors selected A1B from the Special Report on Emission Scenario (SRES) which is distributed at Korea Meteorological Administration. By using data on temperature, rainfall, soil, and land use, the groundwater recharge rate for the research area was estimated by period and embodied as geographic information system (GIS). In order to calculate the groundwater recharge quantity, Visual HELP3 was used as main model for groundwater recharge, and the physical properties of weather, temperature, and soil layers were used as main input data. General changes to water circulation due to climate change have already been predicted. In order to systematically solve problems associated with how the groundwater resource circulation system should be reflected in future policies pertaining to groundwater resources, it may be urgent to recalculate the groundwater recharge quantity and consequent quantity for using via prediction of climate change in Korea in the future and then reflection of the results. The space-time calculation of changes to the groundwater recharge quantity in the study area may serve as a foundation to present additional measures for the improved management of domestic groundwater resources.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.46 no.6
• /
• pp.1039-1057
• /
• 2022

The fashion system has been criticized for relying on a linear economy to reduce short-term costs and increase profits. Meanwhile, the circular economy strives to expand the value chain through a closed loop for companies, society, and the environment by separating consumption from resources. This study aims to elucidate the strategic characteristics of the technological measures that fashion companies and brands are trying to innovate into a sustainable fashion system on the basis of the circular economy concept. Thus, we conducted case studies by dividing the value chain of the fashion system into design, production, and consumption to identify the technological development of the circular fashion system from a technologization perspective that incorporates technological values. First, design appeared to strengthen emotional durability, design and process with circulation in mind, and fashion product digitalization. Second, production manifested itself as material development for the new fiber economy, improvement of non-environmental processes, and customization of demand-driven, responsive production. Third, consumption was the spread of the environmental consumption culture through the sharing economy platform, the realization of a virtual wearing experience to prevent rapid disposal, and the provision of information on sustainable consumption.

• Resources Recycling
• /
• v.24 no.2
• /
• pp.69-78
• /
• 2015

Recently, the importance of efficient resource management has been highlighted due to the uncertainty of its security. Developed countries promote the legislative provision and transition of industrial structure to maximize the efficiency of resource use through supporting the sustainable resource management at national level. Meanwhile Korea has very sensitive industrial structure along with the international resource supply and demand conditions. It is acutely necessary to improve the resource productivity with the various action plans such as the increase of recycling rate and the establishment of methodical resource management system. Especially, the study on the direction of each flow stage and the concrete action plans for using resource efficiently in the life-cycle of resource will be required. Therefore, this study suggests the future direction of each flow stage(production stage and circulatory stage), and the concrete action plans to improve the present problems of resource management in Korea.

• Resources Recycling
• /
• v.33 no.2
• /
• pp.62-72
• /
• 2024

Although the Paris Agreement in 2015 aimed to limit global temperature increases to below 2℃ and eventually to 1.5℃ to address the climate crisis, global temperature continues to rise. Developed countries have proposed a circular economy as a major strategy to tackle this issue. Detailed implementation methods include reusing, remanufacturing, recycling, and energy recovery. Remanufacturing has a greater potential to achieve high added value and carbon neutrality than other resource circulation methods. However, currently, no standardized method for quantitatively evaluating the greenhouse gas (GHG) reduction effects of remanufacturing exists. This study compares and analyzes recent research trends since 2020 on the calculation of GHG emission reduction effects from remanufacturing. It also examines international standards for environmental impact assessment, including GHGs and environmental performance labeling systems. This study derives the key factors for standardizing the calculation of the GHG emission reduction effects of remanufactured products.